Water-use efficiency as a means of modelling net assimilation in boreal forests

Although the processes governing photosynthesis are well understood, scaling from shoot to canopy in coniferous forests is complex. Development of different sap-flow techniques has made it possible to measure transpiration of whole trees and thereby also of whole canopies. There is a strong link between photosynthesis and transpiration, for which reason it would be interesting to test whether measurements of canopy transpiration could also be used to estimate canopy photosynthesis. As a first step towards this, water-use efficiency (WUE) was studied at branch and canopy scales on the basis of branch gas-exchange measurements, with half-hourly and daily temporal resolution. Half-hourly and daily WUE at both branch and canopy scales showed a strong dependency on vapour-pressure deficit ('e). Branch photosynthesis modelled from branch transpiration and 'e mimicked well measured branch photosynthesis. Also, modelled photosynthesis, scaled to canopy and compared to net forest CO₂ exchange measured by the eddy-covariance technique, occasionally showed good agreement. In spite of these seemingly promising results, there was a difference in the response to 'e between branches and between years, which needs to be better understood.     

Influence of concentration and structure of quaternary ammonium salts on their antifouling efficiency tested against a community of marine bacteria

With the view of incorporating quaternary ammonium salts (QAs) in marine paints, nineteen of these were tested against a community of marine bacteria, at a temperature and salinity close to those of seawater. The concentration of QAs and the length of the main substituting chain are the main parameters affecting the growth and adhesion of bacteria, but the nature of (i) the other chains, (ii) the counter‐ion and (iii) the rings when inserted in the QA molecule also influenced the bacteria. Increasing the concentration of the QAs decreased the growth rate of the bacteria, the maximum cell density at the plateau and the rate of adhesion. The effect of increasing the length of the main chain depended on the range of carbon numbers. Below 7 carbon atoms, the growth rate was not significantly modified, but the numbers of cells at the plateau increased in contrast with the adhesion rate which decreased rapidly. Increasing the length of the chain to between 7 and 16 carbon atoms resulted in a decrease in the growth rate, a decrease and then a stabilisation in the numbers of cells at the plateau and no further change in the adhesion rate. Possibly an increase in growth rate, adhesion rate and in the numbers of cells at the plateau may occur above 16 carbon atoms. In contrast, the length of the other chains influenced positively the cell concentration at the plateau, and more generally the efficiency of QAs decreased substantially when these chains had the same numbers of carbon atoms. QAs with iodide as counter‐ion were more effective than those with chloride or bromide and phenyl was more effective than benzyl as rings inserted in QAs. The minimum inhibitory concentrations (MIC) were often very high if compared to standard methods with laboratory strains, and this can be tentatively explained by the dominance of Gram— bacteria in the community assayed, the development of resistant strains in the cultures used with time and the presence of organic matter in the culture medium.     

Views,landmarks, and routes: how do desert ants negotiate an obstacle course?

The Australian desert ant Melophorus bagoti often follows stereotypical routes through a cluttered landscape containing both distant panoramic views and obstacles (plants) to navigate around. We created an artificial obstacle course for the ants between a feeder and their nest. Landmarks comprised natural objects in the landscape such as logs, branches, and tussocks. Many ants travelled stereotypical routes home through the obstacle course in training, threading repeatedly the same gaps in the landmarks. Manipulations altering the relations between the landmarks and the surrounding panorama, however, affected the routes in two major ways. Both interchanging the positions of landmarks (transpositions) and displacing the entire landmark set along with the starting position of the ants (translations) (1) reduced the stereotypicality of the route, and (2) increased turns and meanders during travel. The ants might have used the entire panorama in view-based travel, or the distal panorama might prime the identification and use of landmarks en route. Despite the large data set, both options (not mutually exclusive) remain viable.     

S100A2 in cancerogenesis: a friend or a foe?

Owing to the exceptional intracellular distribution and the heterogeneous expression pattern during transformation and metastasis in various tumors, the EF-hand calcium-binding protein S100A2 attracts increasing attention. Unlike the majority of S100 proteins, S100A2 expression is downregulated in many cancers and the loss in nuclear expression has been associated with poor prognosis. On the other hand, S100A2 is upregulated in some cancers. This mini review highlights the general characteristics of S100A2 and discusses recent findings on its putative functional implication as a suppressor or promoter in cancerogenesis.     

Subcellular distribution of enzymes in the yeast Saccharomycopsis lipolytica, grown on n-hexadecane,with special reference to the ω-hydroxylase

The subcellular localization of the ω-hydroxylase of Saccharomycopsis lipolytica was assessed by the analytical fractionation technique, originally described by de Duve C., Pressman, B.C., Gianetto, R., Wattiaux, R. and Appelmans, F., and hitherto little, if at all, applied to yeast. Protoplasts were separated in six fractions by differential centrifugation. Some of these fractions were further fractioned by density gradient centrifugation. The distribution of ω-hydroxylase and 15 other constituents chosen as possible markers of its subcellular membranes has been established. ω-Hydroxylase resulted in being bound to a membrane that containes also cytochrome P-450 and NADPH-cytochrome c reductase. This membrane clearly differs from five other subcellular entities. (1) Mitochondria were characterized by particulate malate dehydrogenase, particulate Antimycin A-insensitive NADH-cytochrome c reductase, oligomycin-sensitive and K⁺-stimulated ATPase pH 9. (2) Most if not all of the catalase and urate oxidase is peroxisomal. (3) Free ribosomes account for most RNA. (4) Nucleoside diphosphatase is for the first time reported in a yeast and appears to belong to an homogeneous population of small membranes. (5) The soluble compartment contains magnesium pyrophosphatase, alkaline phosphatase, 5′-nucleotidase and part of the NADH-cytochrome c reductase. Latent arylesterase and ATPase pH7 have an unspecific distribution. Alkaline phosphodiesterase I has not been detected.     

Neuromuscular, anaerobic, and aerobic performance characteristics of elite power athletes

Various aspects of neuromuscular, anaerobic, and aerobic performance capacity were investigated in four powerlifters, seven bodybuilders, and three wrestlers with a history of specific training for several years. The data (means +/- SD) showed that the three subject groups possessed similar values for maximal isometric force per unit bodyweight (50.7 +/- 9.6, 49.3 +/- 4.1, and 49.3 +/- 10.9 N/kg, respectively). However, significant (P less than 0.05) differences were observed in the times for isometric force production, so that e.g., times to produce a 30% force level were shorter for the wrestlers and bodybuilders (28.3 +/- 3.1 and 26.4 +/- 6.6 ms) than that (53.3 +/- 23.7 ms) for the powerlifters. Utilization of elastic energy by the wrestlers was significantly (P less than 0.05) better than that of the other two subject groups, as judged from differences between the counter-movement and squat jumps at 0, 40, and 100 kg's loads. No differences were observed between the groups in anaerobic power in a 1-min maximal test, but the values for VO2 max were higher (P less than 0.05) among the wrestlers and bodybuilders (57.8 +/- 6.6 and 50.8 +/- 6.8 ml X kg-1 X min-1) as compared to the powerlifters (41.9 +/- 7.2 ml X kg-1 X min-1). Within the limitations of the subject sample, no differences of a statistical significancy were observed between the groups in fibre distribution, fibre areas, or the area ratio of fast (FT) and slow (ST) twitch fibres in vastus lateralis.(ABSTRACT TRUNCATED AT 250 WORDS)     

Development of a real-time TaqMan assay to detect <Emphasis Type="Italic">mendocina</Emphasis> sublineage <Emphasis Type="Italic">Pseudomonas</Emphasis> species in contaminated metalworking fluids

A TaqMan quantitative real-time polymerase chain reaction (qPCR) assay was developed for the detection and enumeration of three Pseudomonas species belonging to the mendocina sublineage (P. oleovorans, P. pseudoalcaligenes, and P. oleovorans subsp. lubricantis) found in contaminated metalworking fluids (MWFs). These microbes are the primary colonizers and serve as indicator organisms of biodegradation of used MWFs. Molecular techniques such as qPCR are preferred for the detection of these microbes since they grow poorly on typical growth media such as R2A agar and Pseudomonas isolation agar (PIA). Traditional culturing techniques not only underestimate the actual distribution of these bacteria but are also time-consuming. The primer–probe pair developed from gyrase B (gyrB) sequences of the targeted bacteria was highly sensitive and specific for the three species. qPCR was performed with both whole cell and genomic DNA to confirm the specificity and sensitivity of the assay. The sensitivity of the assay was 10¹ colony forming units (CFU)/ml for whole cell and 13.7 fg with genomic DNA. The primer–probe pair was successful in determining concentrations from used MWF samples, indicating levels between 2.9 × 10³ and 3.9 × 10⁶ CFU/ml. In contrast, the total count of Pseudomonas sp. recovered on PIA was in the range of <1.0 × 10¹ to 1.4 × 10⁵ CFU/ml for the same samples. Based on these results from the qPCR assay, the designed TaqMan primer–probe pair can be efficiently used for rapid (within 2 h) determination of the distribution of these species of Pseudomonas in contaminated MWFs.