Genetic architecture of photosynthesis energy partitioning as revealed by a genome-wide association approach

Photosynthesis Research - The photosynthesis process is determined by the intensity level and spectral quality of the light; therefore, leaves need to adapt to a changing environment. The incident...     

Detection of Mycobacterium leprae DNA in clinical and environmental samples using serological analysis and PCR

Molecular Biology Reports - Leprosy is a chronic infectious disease caused by Mycobacterium leprae and persists as a serious public health problem in Brazil. This microorganism is inculturable,...     

Parasitism Behavior of Tetrastichus howardi (Hymenoptera: Eulophidae) on Larvae and Pupae of Sugarcane Borers

Journal of Insect Behavior - Control of the sugarcane borers, Diatraea saccharalis and Diatraea impersonatella (= D. flavipennella) (Lepidoptera: Crambidae), in Brazil, is based on mass release of...     

Bacteriocinogenic Potential of Bacillus amyloliquefaciens Isolated from Kimchi,a Traditional Korean Fermented Cabbage

Bacteriocin production is considered a favorable property for various beneficial cultures. In addition to their potential as biopreservatives, bacteriocins are also promising alternatives for the control of multidrug-resistant pathogens and the inhibition of some viruses and cancer cells. The objective of this study was to screen and characterize a bacteriocin-producing strain with the aim of its future application for control of Listeria monocytogenes, an important food-borne pathogen. A total of 22 potentially bacteriocinogenic strains active against L. monocytogenes ATCC15313 were isolated from locally produced kimchi through a three-level approach. Pure cultures were obtained according to good microbiological practices and differentiated through RAPD-PCR using the primers OPL01, OPL09, and OPL11. Altogether, 5 strains were selected for further study. Specific focus was given to strain ST05DL based on its specific inhibitory activity against L. monocytogenes ATCC15313, while not affecting different strains belonging to the genera Lactobacillus, Pediococcus, Leuconostoc, and Weissella, most of which are beneficial microorganisms. The strain ST05DL was identified as Bacillus amyloliquefaciens based on its sugar fermentation profile obtained through API50CHB analysis and 16S rRNA partial sequencing. The antimicrobial compound produced by B. amyloliquefaciens ST05DL was found to be sensitive to pepsin and α-chymotrypsin, evidence of its proteinaceous nature. The presence of skim milk, NaCl, Tween 80, glycerol, and SDS did not affect the antimicrobial activity. The addition of 20% cell-free supernatant (CFS) obtained from a 24-h culture of B. amyloliquefaciens ST05DL to an exponentially growing culture of L. monocytogenes ATCC15313 successfully inhibited the test microorganisms during the monitored 10-h incubation. Optimal bacteriocin production by B. amyloliquefaciens ST05DL was observed during the stationary phase at 12 h (800 AU/mL) and remained stable for the next 15 h. The ratio between live and dead cells during this period was 74.37% and 25.66%, respectively, as determined by flow cytometry. The presence of the virulence genes hblA, hblB, hblC, nheA, nheB, and nheC was not detected in the total DNA of B. amyloliquefaciens ST05DL, and the strain was resistant only to ampicillin out of 10 tested antibiotics. Future evaluation of expressed bacteriocin/s by B. amyloliquefaciens ST05DL (amino acid sequence, molecular mass, cytotoxicity, detailed mode of action, etc.), will be the next step in the characterization and its potential application as biopreservative and/or pharmaceutical product.

     

Distribution and Chemical Composition of Lignin in Secondary Xylem of Cactaceae

Cactaceae family has heterogeneity in the accumulation of lignocellulose due to the diversity of shapes and anatomy of the wood. Most studies focus on fibrous and dimorphic species; but the non-fibrous species are poorly studied. The aims of this work were to analyze the syringyl/guaiacyl ratio of lignin and its distribution in secondary xylem, especially in non-fibrous species. The syringyl/guaiacyl (S/G) ratio was quantified from 34 species of cacti by nitrobenzene oxidation of free-extractive wood. The distribution of lignocellulose in wood sections stained with safranin O/fast green was determined with epifluorescence microscopy. The S/G ratio was heterogeneous; most of the non-fibrous species had a higher percentage of syringyl, while the fibrous ones accumulate guaiacyl. Fluorescence emission showed that vessel elements and wide-band tracheids had similar tonalities. It is hypothesized that the presence of a higher percentage of syringyl in most cacti is part of the defense mechanism against pathogens, which together with the succulence of the stem represent adaptations that contribute to survival in their hostile environments.     

Inheritance of lambda-cyhalothrin resistance in the predator lady beetle Eriopis connexa (Germar) (Coleoptera: Coccinellidae)

Lambda-cyhalothrin is a pyrethroid insecticide widely used to control pests in various crop ecosystems, in which the lady beetle occurs naturally. Therefore, lady beetle populations are exposed to lambda-cyhalothrin sprays that may foster tolerance to this insecticide. This study was conducted to confirm the occurrence of resistance in the lady beetle Eriopis connexa (Germar) (Coleoptera: Coccinellidae) to lambda-cyhalothrin and to characterize the inheritance of resistance after eight progressive selection with insecticide dosages based on the LD₅₀ determined for the F1 generation. Dose–mortality curves were determined for parental populations, F1 hybrids and backcross progenies. Parameters regarding the heritability of resistance to lambda-cyhalothrin in E. connexa allow estimating 10-fold increase in the initial LD₅₀ after 54.5 generations of successive selections. The resistance of E. connexa to lambda-cyhalothrin was characterized as autosomally inherited and incompletely dominant, and influenced by a major gene with possible influence of secondary genes. Additionally, the resistance in E. connexa varies from functionally dominant to functionally recessive depending on the dose used. These findings indicate that insecticide resistance in E. connexa can be selected in the field as determined for field-collected individuals, and subsequently enhanced under laboratory conditions. Its characterization presented here is an important step toward linking biological and chemical control within pest management regarding the lady beetle and lambda-cyhalothrin targeting different pest groups.     

Electromyographic and mechanomyographic responses across repeated maximal isometric and concentric muscle actions of the leg extensors

The purpose of the present study was to examine the patterns of responses for torque, electromyographic (EMG) amplitude, EMG mean power frequency (MPF), mechanomyographic (MMG) amplitude, and MMG MPF across 30 repeated maximal isometric (ISO) and concentric (CON) muscle actions of the leg extensors. Twelve female subjects (21.1 ± 1.4 yrs; 63.3 ± 7.4 kg) performed ISO and CON fatigue protocols with EMG and MMG signals recorded from the vastus lateralis. The relationships for torque, EMG amplitude, EMG MPF, MMG amplitude, and MMG MPF versus repetition number were examined using polynomial regression. The results indicated there were decreases (p < 0.05) across the ISO muscle actions for torque (r² = 0.95), EMG amplitude (R² = 0.44), EMG MPF (r² = 0.62), and MMG MPF (r² = 0.48), but no change in MMG amplitude (r² = 0.07). In addition, there were decreases across the CON muscle actions for torque (R² = 0.97), EMG amplitude (R² = 0.46), EMG MPF (R² = 0.86), MMG amplitude (R² = 0.44), and MMG MPF (R² = 0.80). Thus, the current findings suggested that the mechanisms of fatigue and motor control strategies used to modulate torque production were similar between maximal ISO and CON muscle actions.     

Finite element analysis of peri-implant bone volume affected by stresses around Morse taper implants: effects of implant positioning to the bone crest

Abstract

Objectives: The purpose of the present study was to evaluate the distribution and magnitude of stresses through the bone tissue surrounding Morse taper dental implants at different positioning relative to the bone crest. Materials and Methods: A mandibular bone model was obtained from a computed tomography scan. A three-dimensional (3D) model of Morse taper implant-abutment systems placed at the bone crest (equicrestal) and 2?mm bellow the bone crest (subcrestal) were assessed by finite element analysis (FEA). FEA was carried out on axial and oblique (45°) loading at 150 N relatively to the central axis of the implant. The von Mises stresses were analysed considering magnitude and volume of affected peri-implant bone. Results: On vertical loading, maximum von Mises stresses were recorded at 6-7?MPa for trabecular bone while values ranging from 73 up to 118?MPa were recorded for cortical bone. On oblique loading at the equiquestral or subcrestal positioning, the maximum von Mises stresses ranged from 15 to 21?MPa for trabecular bone while values at 150?MPa were recorded for the cortical bone. On vertical loading, >99.9vol.% cortical bone volume was subjected to a maximum of 2?MPa while von Mises stress values at 15?MPa were recorded for trabecular bone. On oblique loading, >99.9vol.% trabecular bone volume was subjected to maximum stress values at 5?MPa, while von Mises stress values at 35?MPa were recorded for >99.4vol.% cortical bone. Conclusions: Bone volume-based stress analysis revealed that most of the bone volume (>99% by vol) was subjected to significantly lower stress values around Morse taper implants placed at equicrestal or subcrestal positioning. Such analysis is commentary to the ordinary biomechanical assessment of dental implants concerning the stress distribution through peri-implant sites.     

In vivo measurement of surface skin strain during human gait to improve the design of rehabilitation devices

Abstract

When designing any rehabilitation, sportswear or exoskeleton device the mechanical behaviour of the body segment must be known, specifically the skin, because an excessive tissue strain may lead to ulceration and bedsores. To date, it is not known if the kinematic variability between subjects have an effect on the skin strain field, and therefore, in the design and manufacturing of rehabilitation products, such as orthoses. Several studies have analysed the skin deformation during human motion, nevertheless, the comparison between the skin strain field in different subjects during normal or pathological gait has not been reported yet. This work presents a comparison of skin strain analysis for different gait patterns to study the differences between people and, specifically, if it is possible to standardize the orthotic design between subjects with the same gait disorder. Moreover, the areas with relatively minimum strain during the ankle-foot motion are compared to improve the design of structural parts of rehabilitation devices. In this case, a validated 3D digital image correlation system has been used for this purpose combined with strain ellipse theory. The results demonstrate variations in the skin strain field between subjects with the same pathology and similarities between subjects with normal gait. However, more studies and experiments are necessaries to validate this hypothesis and also to test it between different gait pathologies.