Fine mapping of the Autosomal Dominant Split Hand/Split Foot Locus on Chromosome 7, Band q21.3-q22.1

Split hand/split foot (SHFD) is a human developmental defect characterized by missing digits, fusion of remaining digits, and a deep median cleft in the hands and feet. Cytogenetic studies of deletions and translocations associated with this disorder have indicated that an autosomal dominant split hand/split foot locus (gene SHFD1) maps to 7q21-q22. To characterize the SHFD1 locus, somatic cell hybrid lines were constructed from cytogenetically abnormal individuals with SHFD. Molecular analysis resulted in the localization of 93 DNA markers to one of 10 intervals surrounding the SHFD1 locus. The translocation breakpoints in four SHFD patients were encompassed by the smallest region of overlap among the SHFD-associated deletions. The order of DNA markers in the SHFD1 critical region has been defined as PON–D7S812–SHFD1–D7S811–ASNS. One DNA marker, D7S811, detected altered restriction enzyme fragments in three patients with translocations when examined by pulsed-field gel electro-phoresis (PFGE). These data map SHFD1, a gene that is crucial for human limb differentiation, to a small interval in the q21.3-q22.1 region of human chromosome 7.     

Heterologous expression of endo-beta-1,4-D-glucanase from Clostridium cellulovorans in Clostridium acetobutylicum ATCC 824 following transformation of the engB gene.

Heterologous expression of the Clostridium cellulovorans engB gene by Clostridium acetobutylicum BKW-1 was detected as zones of hydrolysis on carboxymethyl cellulose (CMC) Trypticase glucose yeast plates stained with Congo red. The extracellular cellulase preparation from C. acetobutylicum BKW-1 has a specific activity towards CMC which is more than fourfold that present in C. acetobutylicum ATCC 824. Western blot (immunoblot) analysis using the C. cellulovorans anti-EngB primary antibody demonstrated that an additional 44-kDa protein band was present in the supernatant derived from C. acetobutylicum BKW-1 but was not present in ATCC 824 or ATCC 824(pMTL500E).     

Simulation Model of the Coupling between Nitrification and Denitrification in a Freshwater Sediment

A model was constructed to simulate the results of experiments which investigated nitrification and denitrification in the freshwater sediment of Lake Vilhelmsborg, Denmark (K. Jensen, N. P. Sloth, N. Risgaard-Petersen, S. Rysgaard, and N. P. Revsbech, Appl. Environ. Microbiol. 60:2094-2100, 1994). The model output faithfully represented the profiles of O₂ and NO₃^- and rates of nitrification, denitrification, and O₂ consumption as the O₂ concentration in the overlying water was increased from 10 to 600 μM. The model also accurately predicted the response, to increasing O₂ concentrations, of the integrated (micromoles per square meter per hour) rates of nitrification and denitrification. The simulated rates of denitrification of NO₃^- diffusing from the overlying water (D_w) and of NO₃^- generated by nitrification within the sediment (D_n) corresponded to the experimental rates as the O₂ concentration in the overlying water was altered. The predicted D_w and D_n rates, as NO₃^- concentration in the overlying water was changed, closely resembled those determined experimentally. The model was composed of 41 layers 0.1 mm thick, of which 3 represented the diffusive boundary layer in the water. Large first-order rate constants for nitrification and denitrification were required to completely oxidize all NH₄⁺ diffusing from the lower sediment layers and to remove much of the NO₃^- produced. In addition to the flux of NH₄⁺ from below, the model required a flux of an electron donor, possibly methane. Close coupling between nitrification and denitrification, achieved by allowing denitrification to tolerate some O₂ (~10 μM), was necessary to reproduce the real data. Spatial separation of the two processes (no toleration by denitrification of O₂) resulted in too high NO₃^- concentrations and too low rates of denitrification.     

The incN plasmid replicon: two pathways of DNA polymerase I-independent replication.

The 2,053-bp broad-host-range incompatibility group N replicon of plasmid pCU1 has two components: a region of 1,200 bp that is sufficient for its replication in Escherichia coli PolA+ and PolA- hosts and a regulatory region called the group I iteron region that contains 13 39-bp iterons. Within the 1,200-bp region, there are three replication origins, two of which, called oriB and oriS, function in PolA+ and PolA- hosts and a third, called oriV, which functions only in PolA+ hosts. The region also specifies a protein called RepA. We now show that both oriB and oriS can function in a delta polA strain but that in such a strain, only oriB has an absolute requirement for RepA. oriS can function without RepA and polymerase I provided that the iteron region is deleted and that in this circumstance, it is the only origin, the usage of which is detected. The requirements for oriB usage can thus be distinguished from those for oriS usage. The oriB region can be recovered as a plasmid only if RepA is provided in trans. These complex features of this replicon are also shown to be shared by the IncN replicons of other antibiotic resistance plasmids. Functionally distinguishable origins in a small replicon may be a way of endowing such a replicon with a broad host range.     

Cloning, sequencing, and expression of the structural genes for the cytochrome and flavoprotein subunits of p-cresol methylhydroxylase from two strains of Pseudomonas putida.

The structural genes for the flavoprotein subunit and cytochrome c subunit of p-cresol (4-methylphenol) methylhydroxylase (PCMH) from Pseudomonas putida NCIMB 9869 (National Collection of Industrial and Marine Bacteria, Aberdeen, Scotland) and P. putida NCIMB 9866 were cloned and sequenced. The genes from P.putida NCIMB 9869 were for the plasmid-encoded A form of PCMH, and the genes from P.putida NCIMB 9866 were also plasmid encoded. The nucleotide sequences of the two flavoprotein genes from P.putida NCIMB 9869 and P.putida NCIMB 9866 (pchF69A and pchF66, respectively) were the same except for 5 bases out of 1,584, and the translated amino acid sequences were identical. The nucleotide sequences of the genes for the cytochrome subunits of PCMH from the two bacteria (pchC69A and pchC66) varied by a single nucleotide in their 303-base sequences, and the translated amino acid sequences differed by a single residue at position 41 (Asp in PchC69A and Ala in PchC66). Both cytochromes had 21-residue signal sequences, as expected for periplasmic proteins, and these sequences were identical. On the other hand, no signal sequences were found for the flavoproteins.pchF69A and pchC69A were expressed, separately or together, in Escherichia coli JM109 and P.putida RA4007, with active PCMH produced in both bacteria. The E. coli-expressed flavocytochrome was purified. Our studies indicated that the E.coli-expressed subunits were identical to the subunits expressed in P.putida NCIMB 9869: molecular weights, isoelectric points, UV-visible spectra, and steady-state kinetic parameters were the same for the two sets of proteins. The subunits readily associated upon mixing two crude extracts of E.coli, one extract containing PchC69A and the other containing PchF69A. The courses of association of PchC69A and PchF69A were essentially identical for pure E. coli-expressed subunits and pure P. putida 9869-expressed subunits. E. coli-expressed PchC69A and PchF69A contained covalently bound heme and covalently bound flavin adenine dinucleotide, respectively, as the proteins expressed in nature.     

Microcalorimetric investigations of the interactions of small ions with arterial elastin

The enthalpies of interactions of porcine arterial elastin with alkali metal and alkali earth halides and sulphates were investigated by means of flow microcalorimetry and the stoichiometry measured using radiotracer techniques. In aqueous solutions, all alkali earth halides interacted exothermically at concentrations ranging from 0.01 to 2.5M. All the alkali metal halides, particularly NaCl, exhibited complex concentration-dependent interactions, exothermic at low concentrations and endothermic at high concentrations. Both the anion and cation contributed to the response, although the anion seemed to dominate. SO interacted most strongly of the anions tested. All interactions were reversible in the sense that repeat experiments gave identical results, but the enthalpy of “adsorption” was generally different from that of “desorption.” The enthalpy of interaction depended on the conformation of the elastin in a salt-specific manner. For example, CaCl₂ and MgCl₂ interacted similarly in water but very differently in 1 : 1 water : methanol. © 1994 John Wiley & Sons, Inc.     

Structures of wild-type and mutant signal sequences of Escherichia coli ribose binding protein.

The structure of a chemically synthesized 25-residue-long functional signal peptide of Escherichia coli ribose binding protein was compared with that of a nonfunctional mutant-signal peptide using circular dichroism and two-dimensional 1H NMR in solvents mimicking the amphiphilic environments. The functional peptide forms an 18-residue-long alpha-helix starting from the NH2-terminal region and reaching to the hydrophobic stretch in a solvent consisting of 10% dimethylsulfoxide, 40% water, and 50% trifluoroethanol (v/v). The nonfunctional mutant peptide, which contains a Pro at position 9 instead of a Leu in the wild-type peptide, does not have any secondary structure in that solvent but forms a 12-residue-long alpha-helix within the hydrophobic stretch in water/trifluoroethanol (50:50, v/v) solvent. It seems that the Pro-9 residue in the nonfunctional peptide disturbs the helix propagation from the hydrophobic stretch to the NH2-terminal region. Because both of these peptides have stable helices within the hydrophobic stretch, it may be concluded that the additional 2 turns of the alpha-helix in the NH2-terminal region of the wild-type signal peptide is important for its function.     

The importance of NaCl concentration in a chemically defined medium for the development of bovine oocytes matured and fertilized in vitro

Bovine oocytes matured and fertilized in vitro were cultured in a chemically defined medium (modified Tyrode's solution) without glucose. When different concentrations of NaCl were added to the medium, the proportions of embryos developed to the >/=8-cell, morula and blastocyst stages 96, 144 and 192 h post insemination, respectively, were significantly higher at 89 to 114 mM than 64 to 76 and 126 to 139 mM NaCl. A high proportion (28%) of blastocyst-stage embryos 192 h post insemination was obtained at 89 mM NaCl. When calculated osmolarity in the medium with 64 mM NaCl was varied by adding D-sorbitol, significantly higher proportions of morula-stage embryos were obtained at 265 to 315 mOsm (27 to 38%) than 215 (9%) and 365 (2%) mOsm, but the development to the blastocyst stage was difficult at any osmolarities (215 to 365 mOsm) tested. In the medium with a fixed osmolarity (315 mOsm) but with different concentrations (64 to 114 mM) of NaCl, there were no differences in the proportions (29 to 33%) of morula-stage embryos among different NaCl concentrations. However, significantly higher proportions of embryos developed to the blastocyst stage at 89 to 101 mM (22 to 23%) than 64 to 76 (0 to 9%) and 114 (11%) mM NaCl. When Cl- concentration in the medium with 64 mM NaCl was adjusted by adding choline chloride, significantly higher proportions of embryos developed to the morula stage at 97 to 122 mM (32 to 40%) than 72 (6%) and 147 (2%) mM Cl-, but few embryos developed to the blastocyst stage at any Cl- concentrations (72 to 147 mM) tested. In the medium with 64 or 114 mM NaCl and each with 2 different Na (+)K (+) ratios, there were no differences in the proportions of morula- and blastocyst-stage embryos between different Na+ K+ ratios (31 and 39 at 64 mM NaCl, and 39 and 47 at 114 mM NaCl) at each NaCl concentration. When glucose was added to the medium with 89 mM NaCl 120 h postinsemination, there were no significant differences in the proportions (40 to 48%) of morula-stage embryos 144 h post insemination among different concentrations (0 to 6.95 mM) of glucose. The proportion (33%) of blastocysts 192 h post insemination at 2.78 mM glucose was significantly higher than the values at 0 (22%), 5.56 (19%) and 6.95 (15%) mM but not different compared with the values at 1.39 (23%) and 4.17 (28%) mM. In conclusion, NaCl concentration in a defined medium is one of the most important factors for the development of bovine embryo to the blastocyst stage, but the development of embryos up to the morula stage is also regulated by osmolarity and/or Cl-concentration.