Expression of glucoamylase gene usingSUC2 promoter inSaccharomyces cerevisiae

Summary The cloning of glucoamylase geneSTA using theSUC2 promoter intoSaccharomyces cerevisiae was performed. The signal sequence ofSTA gene was used for the secretion of glucoamylase protein. The plasmid constructed in this way was named YEpSUCSTA and its expression was identified. The expression of YEpSUCSTA was repressed in the presence of glucose in growth medium, but derepressed when glucose became depleted. YEpSUCSTA showed the similar efficiency of glucoamylase secretion as YEpSTA-F which has the entireSTA gene. Glucoamylase activity in starch-glucose medium was largely increased because cell mass and plasmid stability were high in biosynthesis phase compared to extracellular glucoamylase activities in media which starch or glucose was the only carbon source.     

Hairless is required for the development of adult sensory organ precursor cells in Drosophila

Reduction of the wild-type activity of the gene Hairless (H) results in two major phenotypic effects on the mechanosensory bristles of adult Drosophila. Bristles are either 'lost' (i.e. the shaft and socket fail to appear) or they exhibit a 'double socket' phenotype, in which the shaft is apparently transformed into a second socket. Analysis of the phenotypes conferred by a series of H mutant genotypes demonstrates (1) that different sensilla exhibit different patterns of response to decreasing levels of H+ function, and (2) that the 'bristle loss' phenotype results from greater loss of H+ function than the 'double socket' phenotype. The systematic study of H allelic combinations enabled us to identify genotypes that reliably produce specific mutant defects in particular positions on the bodies of adult flies. This permitted us to investigate the cellular development of sensilla in these same positions in larvae and pupae and thereby establish the developmental basis for the mutant phenotypes. We have found that H is required for at least two steps of adult sensillum development. In positions where 'double socket' microchaetes appear on the notum of H mutant flies, sensillum precursor cells are present in the developing pupa and divide normally, but their progeny adopt an aberrant spatial arrangement and fail to differentiate correctly. In regions of the notum exhibiting 'bristle loss' in adult H mutants, we were unable at the appropriate stages of development to detect sensillum-specific cell types, the precursor cell divisions that generate them, or the primary precursor cells themselves. Thus, the H 'bristle loss' phenotype appears to reflect a very early defect in sensillum development, namely the failure to specify and/or execute the sensory organ precursor cell fate. This finding indicates that H is one of a small number of identified genes for which the loss-of-function phenotype is the failure of sensillum precursor cell development.     

Work flow control in the flexible flow line

This research involves the development and evaluation of a part flow control model for a type of flexible manufacturing system (FMS) called a dedicated flexible flow line (FFL). In the FFL, all part types flow along the same path between successive machine groups. The specific objective of the part flow control model for the FFL is to minimize makespan for a given set of parts produced in a FFL near-term schedule, given fixed available buffer constraints. The control model developed in this research involved the repeated, real-time execution of a mathematical programming algorithm. The algorithm attempts to release the right mix of parts at the tight time to keep the FFL operating smoothly. The focus of the approach is directed toward managing WIP buffers for each machine group queue. The algorithm specifically incorporates stochastic disturbance factors such as machine failures. Through a limited number of simulation experiments, performance of the control model is shown to be superior to other parts releasing and control methods reported in the literature.     

Study of relationship among species ofVibrio,Photobacterium, and terrestrial enterobacteria by an immunological comparison of glutamine synthetase and superoxide dismutase

The amino acid sequence divergence of glutamine synthetase (GS) from species ofVibrio, Photobacterium, Aeromonas, Escherichia, Salmonella, Citrobacter, Enterobacter, Serratia, Proteus, Erwinia, Xenorhabdus, andPlesiomonas was determined by quantitative microcomplement fixation, using antisera to GS fromVibrio alginolyticus andEscherichia coli. A similar study was performed with superoxide dismutase (SOD), using antiserum to the enzyme fromV. alginolyticus. A comparison of the results for GS and SOD, relative to the enzymes fromV. alginolyticus, as well as a comparison of these data with the results of previous ribosomal RNA (rRNA)/DNA homology studies indicated a high degree of congruence (correlation coefficients≥0.9). The results with both enzymes suggested four major groupings among these genera: (i)Vibrio, (ii)Photobacterium, (iii)Aeromonas, (iv) a large and heterogeneous group which included the peritrichously flagellated terrestrial enterobacteria.     

Direct fluorometric analysis of benzo(a)pyrene metabolite formation by mouse liver microsomes

We have examined the metabolites produced by in vitro incubation of benzo(a)pyrene with 3-methylcholanthrene-induced mice liver microsomes. Our objective was to observe directly a possible difference in microsomal enzyme systems of animal models having different susceptibility to chemical carcinogens. The metabolites produced by the two animal models,$\text{C57BL}\text{6J}$ and $\text{DBA}\text{2}$ mice, were analyzed by a highly sensitive, “three-dimensional” fluorescence plotting technique. The fluorescence spectra of the total ethyl acetate-soluble metabolites clearly indicate that the metabolites produced by $\text{DBA}\text{2}$ enzymes were predominantly monohydroxylated benzo(a)pyrene while those produced by the liver microsomes of $\text{C57BL}\text{6J}$ were highly enriched with the 7,8-dihydrodihydroxybenzo(a)pyrene type.     

Dopamine D3 Receptor Mediates Preadolescent Stress-Induced Adult Psychiatric Disorders

Several studies have shown that repeated stressful experiences during childhood increases the likelihood of developing depression- and anxiety-related disorders in adulthood; however, the underlying mechanisms are not well understood. We subjected drd3-EGFP and drd3-null mice to daily, two hour restraint stress episodes over a five day period during preadolescence (postnatal day 35 to 39), followed by social isolation. When these mice reached adulthood (post-natal day > 90), we assessed locomotor behavior in a novel environment, and assessed depression-related behavior in the Porsolt Forced Swim test. We also measured the expression and function of dopamine D3 receptor in limbic brain areas such as hippocampus, nucleus accumbens and amygdala in control and stressed drd3-EGFP mice in adulthood. Adult male mice subjected to restraint stress during preadolescence exhibited both anxiety- and depression-related behaviors; however, adult female mice subjected to preadolescent restraint stress exhibited only depression-related behaviors. The development of preadolescent stress-derived psychiatric disorders was blocked by D3 receptor selective antagonist, SB 277011-A, and absent in D3 receptor null mice. Adult male mice that experienced stress during preadolescence exhibited a loss of D3 receptor expression and function in the amygdala but not in hippocampus or nucleus accumbens. In contrast, adult female mice that experienced preadolescent stress exhibited increased D3 receptor expression in the nucleus accumbens but not in amygdala or hippocampus. Our results suggest that the dopamine D3 receptor is centrally involved in the etiology of adult anxiety- and depression-related behaviors that arise from repeated stressful experiences during childhood.     

Caffeic Acid Phenethyl Ester Loaded in Microemulsions: Enhanced In Vitro Activity against Colon and Breast Cancer Cells and Possible Cellular Mechanisms

Food Biophysics - Caffeic acid phenethyl ester (CAPE) has high cytotoxicity against various cancer cells but has low water solubility and poor bioavailability. The objective of this work was to...     

An Antiaging Electrolyte Additive for High‐Energy‐Density Lithium‐Ion Batteries

High‐capacity Li‐rich layered oxide cathodes along with Si‐incorporated graphite anodes have high reversible capacity, outperforming the electrode materials used in existing commercial products. Hence, they are potential candidates for the development of high‐energy‐density lithium‐ion batteries (LIBs). However, structural degradation induced by loss of interfacial stability is a roadblock to their practical use. Here, the use of malonic acid‐decorated fullerene (MA‐C₆₀) with superoxide dismutase activity and water scavenging capability as an electrolyte additive to overcome the structural instability of high‐capacity electrodes that hampers the battery quality is reported. Deactivation of PF₅ by water scavenging leads to the long‐term stability of the interfacial structures of electrodes. Moreover, an MA‐C₆₀‐added electrolyte deactivates the reactive oxygen species and constructs an electrochemically robust cathode‐electrolyte interface for Li‐rich cathodes. This work paves the way for new possibilities in the design of electrolyte additives by eliminating undesirable reactive substances and tuning the interfacial structures of high‐capacity electrodes in LIBs.     

High‐Voltage‐Driven Surface Structuring and Electrochemical Stabilization of Ni‐Rich Layered Cathode Materials for Li Rechargeable Batteries

Layered lithium–nickel–cobalt–manganese oxide (NCM) materials have emerged as promising alternative cathode materials owing to their high energy density and electrochemical stability. Although high reversible capacity has been achieved for Ni‐rich NCM materials when charged beyond 4.2 V versus Li⁺/Li, full lithium utilization is hindered by the pronounced structural degradation and electrolyte decomposition. Herein, the unexpected realization of sustained working voltage as well as improved electrochemical performance upon electrochemical cycling at a high operating voltage of 4.9 V in the Ni‐rich NCM LiNi_0.895Co_0.085Mn_0.02O₂ is presented. The improved electrochemical performance at a high working voltage at 4.9 V is attributed to the removal of the resistive Ni²⁺O rock‐salt surface layer, which stabilizes the voltage profile and improves retention of the energy density during electrochemical cycling. The manifestation of the layered Ni²⁺O rock‐salt phase along with the structural evolution related to the metal dissolution are probed using in situ X‐ray diffraction, neutron diffraction, transmission electron microscopy, and X‐ray absorption spectroscopy. The findings help unravel the structural complexities associated with high working voltages and offer insight for the design of advanced battery materials, enabling the realization of fully reversible lithium extraction in Ni‐rich NCM materials.     

Microdischarge‐Based Direct Current Triboelectric Nanogenerator via Accumulation of Triboelectric Charge in Atmospheric Condition

Direct conversion of mechanical energy into direct current (DC) by triboelectric nanogenerators (TENGs) is one of the desired features in terms of energy conversion efficiency. Although promising applications have been reported using the triboelectric effect, effective DC generating TENGs must be developed for practical purposes. Here, it is reported that continuous DC generation within a TENG itself, without any circuitry, can be achieved by triggering air breakdown via triboelectrification. It is demonstrated that DC generation occurs in combination with i) charge accumulation to generate air breakdown, ii) incident discharge (microdischarge), and iii) conveyance of charges to make the device sustainable. 10.5 mA m^?2 of output current and 10.6 W m^?2 of output power at 33 MΩ load resistance are achieved. Compared to the best DC generating TENGs ever reported, the TENG in this present study generates about 20 times larger root‐mean square current density.