How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Natural occurrence of zearalenone in rice and soybean produced in Korea

88 rice and 75 soybean samples were collected from 8 provinces of Korea from March through September in 1988. The Fusarium mycotoxins, zearalenone was analyzed by direct competitive enzyme linked immunosorbent assay. 10.2% of rice and 9.3 % of soybean samples contained detectable zearalenone. The average levels of zearalenone of rice and soybean samples were 11.78μg/kg and 7.70μ/kg, respectively.     

Selection and proliferation of rapid growing cell lines from embryo derived cell cultures of yew tree (Taxus cuspidata Sieb. et Zucc)

Calli were induced from 300,000 embryos isolated from immature to mature stage of seeds collected on late September from 14 elite trees. When the embryos were cultured onto plastic Petri-dish containing 20 mL of modified B5 basal medium supplemented with 3% (w/v) sucrose, 500 mg/L casein hydrolysate, 250 mg/L myo-inositol, 0.5% (w/v) polyvinyl polypyrrolidon (PVPP), 2×MS vitamins, 0.5 mg/L gibberellic acid, and 10 mg/L 2,4-D after 2 weeks of culture, yellowish-white calli were immediately formed on the surfaces of embryos, and subcultured for 4 weeks in same culture medium. Because most of calli maintained for more than 3 months were revealed differences in their colors, surface texture, and growth rate, visual selection was made for first round screening. When the size of visually selected calli larger than 19 mm in their diameter were inoculated, persistent proliferation was observed. Among the plating methods tested for the selection of rapid growing cell lines at single cell and/or small cell aggregate level, 2-layer spread plating revealed as the best for single cell cloning. To enhance cell growth and maintain high rate of viability for long-term culture of yew cells in bioreactor, final cell volume less than 50% in SCV seemed to be the best. Time course study revealed that 30% of inoculum density was suitable for fed batch culture. Among the tested conditional media, the rate of 1∶2 (old medium: fresh medium) was recorded at the best for cell growth.     

How costly is clutch formation in the Audouin's Gull Larus audouinii?

During the Audouin's Gull's breeding season at the Ebro Delta in 1993, 24 fresh eggs from eight three-egg clutches (modal clutch-size) were collected at the peak of the laying period. Eggs were processed to obtain formalin-fixed yolks, which were halved and stained using the potassium dichromate method. Digitized images of the yolks were examined to assess the daily rates of yolk deposition. We used these data in combination with egg compositional analysis to build a model of energy demands during the formation of an average clutch in Audouin's Gull. To show how the different parameters of clutch formation affect the daily energy investment peak, we performed a simulation analysis in which the rapid yolk development (RYD) period, the follicle triggering interval (FTI), the laying interval (LI) and the albumen synthesis period (ASP) were allowed to vary simultaneously. In our sample, the mean RYD period was seven days with a range from six to eight days. There were no significant differences in yolk volume among eggs in a clutch, but albumen volume was significantly smaller in third eggs. According to our model the albumen synthesis of the a-egg coincides with the energy demand peak for clutch formation. This peak represents an increase by ca. 42% in female energy requirements. Values obtained from the simulation analysis showed that only the ASP of the a-egg and the RYD durations of the second and third follicles produced noticeable reductions in peak energy investment. We predict that in gulls, whose laying intervals seem to be kept constant, significant increases of the durations of the RYD periods of second and third eggs, or even significant reductions of yolk size of these eggs, may operate simultaneously to match the energy demands during clutch formation to the prevailing food conditions.     

Unaltered metabolism of taurolithocholic acid with changes in composition of rat intestinal microflora

Changes in composition of both total aerobes and anaerobes of rat intestinal microflora do not appear to affect the metabolism of taurolithocholic acid.     

Amino-Terminal Charge Affects the Periplasmic Accumulation of Recombinant Heregulin/EGF Hybrids Exported Using theEscherichia coliAlkaline Phosphatase Signal Sequence

AnEscherichia coliexpression system that exploits the bacterial alkaline phosphatase (PhoA) signal sequence to translocate recombinant human epidermal growth factor (hEGF) to the periplasm was used to evaluate how changes in the composition and sequence of amino acids near the PhoA–hEGF junction influence the periplasmic accumulation of recombinant protein. A series of chimeric structural genes was generated byin vitroreplacement of hEGF sequence with analogous segments from the EGF-like domain of human heregulin (HRG), significantly altering the electrostatic character of the amino-terminal region of the mature protein. Quantitation of HRG/EGF protein inE. coliperiplasmic extracts, by RP-HPLC, showed a fourfold decrease after one of two acidic residues located in the amino-terminal region of the mature hEGF, near the PhoA junction, was replaced. An additional threefold decrease was observed when the second acidic residue was replaced with a positively charged lysine. Further extension of the amino-terminal HRG sequence, beyond the first six residues, resulted in net neutralization of a more distant EGF acidic residue with no additional effect on protein yield. The importance of having a negatively charged group in the amino-terminal region of the mature protein was confirmed when insertion of an aspartic acid near the amino-terminus of two poorly expressed hybrid protein sequences resulted in a five- to eightfold increase in their recovery from the periplasm. This study demonstrates the importance of having negatively charged residues near the fusion junction of recombinant proteins expressed inE. coliusing the PhoA signal sequence for protein export.     

Effect of surfactant-associated protein-A (SP-A) on the activity of lipid extract surfactant

The properties of natural bovine surfactant and its lipid extract have been examined with a pulsating bubble surfactometer which assesses the ability of surfactant lipids to adsorb to the air/liquid interface and reduce the surface tension to near 0 dynes/cm during dynamic compression. Studies conducted at 1 mg/ml phospholipid revealed that the surface activity (i.e., the ability to produce low surface tensions) of lipid extracts could be enhanced by incubating the sample at 37 degrees C for 120 min or by addition of CaCl2. In contrast, incubation at 37 degrees C only slightly improved the biophysical activity of natural surfactant and the addition of CaCl2 had a more modest effect than with lipid extracts. With 20 mM CaCl2, the surfactant activity of lipid extract surfactant was similar to that of natural surfactant. Incubation with EDTA reduced the biophysical activity of natural surfactant. Experiments in which increasing amounts of lipid extract were replaced by natural surfactant revealed that small amounts of natural surfactant enhanced the surfactant activity of lipid extract. The biophysical activity of lipid extract surfactant was also increased by the addition of soluble surfactant-associated protein-A (SP-A) (28-36 kDa) purified from natural bovine surfactant. These results indicate that SP-A (28-36 kDa) improves the surfactant activity of lipid extracts by enhancing the rate of adsorption and/or spreading of phospholipid at the air/liquid interface resulting in the formation of a stable lipid monolayer at lower bulk concentrations of either phospholipid or calcium.     

Intermolecular histone H4 interactions in core nucleosomes

Chicken histone H4, labeled at methionine-84 with 1-N-pyrenyliodoacetamide, has been incorporated into a nucleosome-like particle with core length DNA and unmodified histones H2A, H2B, and H3. These synthetic nucleosomes exhibit properties very similar to those displayed by native particles and those labeled with other fluors. The emission spectrum of the pyrene-labeled nucleosome was characteristic of excited dimer (excimer) fluorescence, indicating that the single pyrene groups on the two H4 molecules are in close proximity in the reconstituted particle. Histone H4 was also labeled randomly at lysines with a group that contains two pyrene moieties separated by 12 A at most. Incorporation of this histone into nucleosome-like particles provides an excimer standard which does not depend on intermolecular interactions. The properties of the pyrene-containing nucleosome were examined as a function of ionic strength. It was found that the H4-H4 pyrene excimer fluorescence exhibited a cooperative disruption centered at 0.1 M NaCl which preceded increases in accessibility and environment polarity revealed by other fluors attached at the same site.