Boosting Polysulfide Redox Kinetics by Graphene‐Supported Ni Nanoparticles with Carbon Coating

Lithium–sulfur batteries have attracted extensive attention because of their high energy density. However, their application is still impeded by the inherent sluggish kinetics and solubility of intermediate products (i.e., polysulfides) of the sulfur cathode. Herein, graphene‐supported Ni nanoparticles with a carbon coating are fabricated by directly carbonizing a metal–organic framework/graphene oxide composite, which is then dispersed on a commercial glass fiber membrane to form a separator with electrocatalytic activity. In situ analysis and electrochemical investigation demonstrate that this modified separator can effectively suppress the shuttle effect and regulate the catalytic conversion of intercepted polysulfides, which is also confirmed by density functional theory calculations. It is found that Ni–C sites can chemically interact with polysulfides and stabilize the radical S₃^?? through Ni? S bonds to enable fast dynamic equilibrium with S₆^2?, while Ni nanoparticles reduce the oxidation barrier of Li₂S and accelerate ion/electron transport. As a result, the corresponding lithium–sulfur battery shows a high cycle stability (88% capacity retention over 100 cycles) even with a high sulfur mass loading of 8 mg cm^?2 and lean electrolyte (6.25 µ L mg^?1). Surprisingly, benefitting from the improved kinetics, the battery can work well at ?50 °C, which is rarely achieved by conventional Li–S batteries.     

Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

Nonwoven rGO Fiber‐Aramid Separator for High‐Speed Charging and Discharging of Li Metal Anode

Li metal, which has a high theoretical specific capacity and low redox potential, is considered to the most promising anode material for next‐generation Li ion‐based batteries. However, it also exhibits a disadvantageous solid electrolyte interphase (SEI) layer problem that needs to be resolved. Herein, an advanced separator composed of reduced graphene oxide fiber attached to aramid paper (rGOF‐A) is introduced. When rGOF‐A is applied, F^? anions, generated from the decomposition of the LiPF₆ electrolyte during the SEI layer formation process form semi‐ionic C? F bonds along the surface of rGOF. As Li⁺ ions are plated, the “F‐doped” rGO surface induces the formation of LiF, which is known as a component of a chemically stable SEI, therefore it helps the Li metal anode to operate stably at a high current of 20 mA cm^?2 with a high capacity of 20 mAh cm^?2. The proposed rGOF‐A separator successfully achieves a stable SEI layer that could resolve the interfacial issues of the Li metal anode.     

Industrial attributes of β-glucanase produced by Bacillus sp. CSB55 and its potential application as bio-industrial catalyst

Bioprocess and Biosystems Engineering - The β-glucanase produced from Bacillus sp. CSB55 not only depicts the potent industrial characteristics but also relates as bio-industrial catalyst...     

腹腔镜结肠癌根治术治疗老年局部进展期结肠癌的疗效和安全性及对患者免疫功能的影响

目的:比较分析腹腔镜和开腹结肠癌根治术治疗老年局部进展期结肠癌的临床疗效和安全性及对患者免疫功能的影响。方法:根据随机数字表法,将64例老年局部进展期结肠癌患者随机分为腹腔镜组和开腹组,每组各32例,分别接受腹腔镜、开腹结肠癌根治术治疗。比较两组手术相关指标、手术前后免疫功能变化、术后近远期并发症的发生情况及预后。结果:与开腹组比较,腹腔镜组患者手术时间明显延长,而术中出血量、胃肠功能恢复时间则明显缩短(P<0.05)。两组淋巴结清扫数比较差异无统计学意义(P>0.05)。术后3个月,腹腔镜组CD4+、CD4+/CD8+比值均明显高于开腹组(P<0.05),且与术前比较差异均无统计学意义(P>0.05)。与开腹组比较,腹腔镜组患者术后切口感染的发生率明显降低(P<0.05),两组其他近期并发症如吻合口瘘、吻合口出血,远期并发症如黏连性肠梗阻、切口疝的发生率比较差异均无统计学意义(P>0.05)。腹腔镜组与开腹组术后2年的局部复发率、1年和2年生存率比较差异均无统计学意义(P>0.05)。结论:腹腔镜手术和开腹手术治疗老年局部进展期结肠癌患者的临床疗效和预后相当,但腹腔镜手术对患者的免疫功能影响更小,且安全性更高。     

脐血管前置产前超声表现及临床效果分析

目的:研究脐血管前置产前超声表现及临床效果。方法:回顾性分析2017年1月至2018年12月期间本院收治的34例脐血管前置孕妇临床资料,均进行产前超声检查,将结果与产后病理结果进行比较,分析超声表现。结果:同产后病理检查结果相比较,34例孕妇的产前超声诊断准确率、误诊率分别为97.06%、2.94%,数据对比差异无统计学意义(P>0.05),产前超声检查显示的胎盘及脐带入口情况主要为帆状胎盘、脐带胎盘边缘附着、边缘性前置胎盘、低置性前置胎盘、副胎盘等。结论:产前超声检查具有较高的脐血管前置诊断准确率,可为临床分娩结局的改善提供指导,适合推广应用在临床中。     

RPN2与肝癌患者预后及对肝癌细胞生长的作用

目的:探讨核糖蛋白2(ribophorin II,RPN2)在肝细胞肝癌(HCC)组织中的表达和对HCC患者生存的影响,同时分析RPN2对肝癌HepG2细胞生长和克隆形成的作用。方法:应用免疫组化方法和HCC公共芯片数据,从蛋白和m RNA水平检测HCC组织中RPN2的表达,同时分析RPN2与HCC患者临床参数的关系及预后相关性;进一步利用MTS法和克隆形成实验在肝癌HepG2细胞中检测RPN2对细胞生长的作用。结果:98例肝癌组织中,RPN2阳性表达率88.78%,对应癌旁肝组织中,RPN2阳性表达率74.49%;癌组织中RPN2染色评分为5.80±3.15,癌旁肝组织RPN2染色评分为2.13±1.59,肝癌组织中RPN2表达显著上调(P0.001)。3个肝癌公共芯片数据(共522例肝癌)中RPN2的m RNA表达水平同样显著升高(均P0.001)。98例肝癌患者RPN2表达水平与肿瘤直径(P=0.004)、门脉侵袭(P=0.012)和TNM分期(P=0.009)相关;RPN2高表达的患者总体生存期(OS)和无复发生存期(RFS)较RPN2低表达的患者短(OS:P=0.027;RFS:P=0.036)。肝癌HepG2细胞转染RPN2小干扰RNA后,细胞生长能力显著受抑制。结论:RPN2在肝癌中表达显著升高,RPN2的表达与肝癌的恶性进展有关,RPN2显著促进肝癌细胞生长。     

滇川桂3省暗褐网柄牛肝菌菌腔虫瘿的寄主植物与介壳虫种类调查

暗褐网柄牛肝菌Phlebopus portentosus与介壳虫形成的菌腔虫瘿是该菌营养机制研究的关键环节。本研究先后在云南、四川和广西3省区暗褐网柄牛肝菌产区的16个地点,对菌腔虫瘿的生态和生物学进行了大量的野外调查。发现根部着生菌腔虫瘿的寄主植物有31种,涉及16个科的28个属。与暗褐网柄牛肝菌形成菌腔虫瘿的介壳虫种类有12种,其中10种隶属粉蚧科Pseudococcidae、绵蚧科Monophlebidae、蚧科Coccidae各1种。在不同的寄主植物上菌腔虫瘿的寄生位置和形状会有所不同,与暗褐网柄牛肝菌菌丝形成菌腔虫瘿的寄主植物和介壳虫之间不存在专一性。上述研究结果为暗褐网柄牛肝菌的仿生栽培奠定了基础。     

基于高通量测序的麦红吸浆虫转录组分析

麦红吸浆虫Sitodiplosis mosellana(Gehin)是一种世界性的小麦害虫。为获得其转录组信息,本研究采用新一代高通量测序技术Illumina HiSeq TM 2000对麦红吸浆虫成虫转录组进行测序。共获得转录组样本数据量为27.88 G,经分析共获得59257个Unigenes,总长度49861164 bp,最短20 bp,最长29282 bp,平均长度841 bp。将Unigenes序列与NR、NT、Swiss-Prot、KEGG、GO和KOG数据库进行比对(e≤10-10),共获得95029个结果。通过GO功能分类,共有19584个Unigenes在GO数据库中细胞组分、分子功能和生物学过程等3大类50个功能组中找到对应。与KOG数据库进行比对,共有11279个麦红吸浆虫Unigenes被注释,按功能大致可分为26类。通过KEGG pathways分析,共有9110个麦红吸浆虫Unigenes被注释,分别归属于细胞进程、环境信息进程、遗传信息进程、新陈代谢和有机体系统5大类代谢途径,主要包括细胞生长与死亡、细胞运动、信号转导、能量代谢等32类代谢途径。CDS预测发现30088条序列可被编码,占全部基因的50.78%。SSR位点查找发现,在59257个Unigenes中共找到36323个SSR位点,发生率为61.30%。本研究获得的巨大的麦红吸浆虫转录组信息,为麦红吸浆虫的功能基因挖掘提供了重要的信息资源。