Administration of progranulin (PGRN) triggers ER stress and impairs insulin sensitivity via PERK-eIF2α-dependent manner

Progranulin (PGRN) has recently emerged as an important regulator for glucose metabolism and insulin sensitivity. However, the direct effects of PGRN in vivo and the underlying mechanisms between PGRN and impaired insulin sensitivity are not fully understood. In this study, mice treated with PGRN for 21 d exhibited the impaired glucose tolerance and insulin sensitivity, remarkable ER stress as well as attenuated insulin signaling in liver and adipose tissue but not in skeletal muscle. Furthermore, treatment of mice with phenyl butyric acid (PBA), a chemical chaperone alleviating ER stress, resulted in a significant restoration of systemic insulin sensitivity and recovery of insulin signaling induced by PGRN. Consistent with these findings in vivo, we also observed that PGRN treatment induced ER stress, impaired insulin signaling in cultured hepatocytes and adipocytes, with such effects being partially nullified by blockade of PERK. Whereas PGRN-deficient hepatocytes and adipocytes were more refractory to palmitate-induced insulin resistance, indicating the causative role of the PERK-eIF2α axis of the ER stress response in action of PGRN. Collectively, our findings supported the notion that PGRN is a key regulator of insulin resistance and that PGRN may mediate its effects, at least in part, by inducing ER stress via the PERK-eIF2α dependent pathway.     

An emerging role for TOR signaling in mammalian tissue and stem cell physiology

The mammalian target of rapamycin (mTOR) is a kinase that responds to a myriad of signals, ranging from nutrient availability and energy status, to cellular stressors, oxygen sensors and growth factors. The finely tuned response of mTOR to these stimuli results in alterations to cell metabolism and cell growth. Recent studies of conditional knockouts of mTOR pathway components in mice have affirmed the role of mTOR signaling in energy balance, both at the cell and whole organism levels. Such studies have also highlighted a role for mTOR in stem cell homeostasis and lifespan determination. Here, we discuss the molecular mechanisms of TOR signaling and review recent in vitro and in vivo studies of mTOR tissue-specific activities in mammals.     

Biomolecule-stabilized Au nanoclusters as a fluorescence probe for sensitive detection of glucose

In this work, biomolecule-stabilized Au nanoclusters were demonstrated as a novel fluorescence probe for sensitive and selective detection of glucose. The fluorescence of Au nanoclusters was found to be quenched effectively by the enzymatically generated hydrogen peroxide (H(2)O(2)). By virtue of the specific response, the present assay allowed for the selective determination of glucose in the range of 1.0×10(-5) M to 0.5×10(-3) M with a detection limit of 5.0×10(-6) M. The absorption spectroscopy, X-ray photoelectron spectroscopy (XPS) and fluorescence decay studies were then performed to discuss the quenching mechanism. In addition, we demonstrated the application of the present approach in real serum samples, which suggested its great potential for diagnostic purposes.     

Facile fabrication of magnetic gold electrode for magnetic beads-based electrochemical immunoassay: application to the diagnosis of Japanese encephalitis virus

A novel magnetic beads-based electrochemical immunoassay strategy has been developed for the detection of Japanese encephalitis virus (JEV). The magnetic gold electrode was fabricated to manipulate magnetic beads for the direct sensing applications. Gold-coated magnetic beads were employed as the platforms for the immobilization and immunoreaction process, and horseradish peroxidase was chosen as an enzymatic tracer. The proteins (e.g., antibodies or immunocomplexes) attached on the surface of magnetic beads were found to induce a significant decline in their electric conductivity. Multiwalled carbon nanotubes were introduced to improve sensitivity of the assay. The envelope (E) protein, a major immunogenic protein of JEV, was utilized to optimize the assay parameters. Under the optimal conditions, the linear response range of E protein was 0.84 to 11,200 ng/mL with a detection limit of 0.56 ng/mL. When applied for detection of JEV, the proposed method generated a linear response range between 2×10(3) and 5×10(5) PFU/mL. The detection limit for JEV was 2.0×10(3) PFU/mL, which was 2 orders of magnitude lower than that of immunochromatographic strip and similar to that obtained from RT-PCR. This method was also successfully applied to detect JEV in clinical specimens.     

Sensitive detection of p53 tumor suppressor gene using an enzyme-based solid-state electrochemiluminescence sensing platform

An enzyme-based solid-state electrochemiluminescence (ECL) sensing platform for sensitive detection of a single point mutation is developed successfully using p53 tumor suppressor gene as a model analyte. A composite of multiwalled carbon nanotubes and Ruthenium (II) tris-(bipyridine) (MWNTs-Ru(bpy)(3)(2+)) was prepared and coated on an electrode surface, which was covered by polypyrrole (PPy) to immobilize ssDNA. Then, the ssDNA recognized the gold nanoparticle (AuNP)-labeled p53 tumor suppressor gene, and produced AuNP-dsDNA electrode with AuNP layer. The surface adsorbed the glucose-dehydrogenase (GDH) molecules for producing ECL signal. This system combined enzyme reaction with ECL detection, and it can recognize sequence-specific wild type p53 sequence (wtp53) and muted type p53 sequence (mtp53) with discrimination of up to 56.3%. The analytic results were sensitive and specific. It holds promise for the diagnosis and management of cancer.     

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Activated carbon (AC) air-cathodes are inexpensive and useful alternatives to Pt-catalyzed electrodes in microbial fuel cells (MFCs), but information is needed on their long-term stability for oxygen reduction. AC cathodes were constructed with diffusion layers (DLs) with two different porosities (30% and 70%) to evaluate the effects of increased oxygen transfer on power. The 70% DL cathode initially produced a maximum power density of 1214±123 mW/m(2) (cathode projected surface area; 35±4 W/m(3) based on liquid volume), but it decreased by 40% after 1 year to 734±18 mW/m(2). The 30% DL cathode initially produced less power than the 70% DL cathode, but it only decreased by 22% after 1 year (from 1014±2 mW/m(2) to 789±68 mW/m(2)). Electrochemical tests were used to examine the reasons for the degraded performance. Diffusion resistance in the cathode was found to be the primary component of the internal resistance, and it increased over time. Replacing the cathode after 1 year completely restored the original power densities. These results suggest that the degradation in cathode performance was due to clogging of the AC micropores. These findings show that AC is a cost-effective material for oxygen reduction that can still produce ~750 mW/m(2) after 1 year.     

Effect of oxidizing and non-oxidizing biocides on biofilm at different substrate levels in the model recirculating cooling water system

With the reducing of water resources, using advanced treated refinery wastewater as recirculating cooling water is an effective method to save water and to reduce the pollution of petroleum and petrochemical industry. However, the control of biofilm is a bottleneck in the application of this technology. To resolve the problem of biofilm formation and development, antimicrobial characteristics of chlorine dioxide and benzyldimethyldodecyl-ammonium chloride on biofilm at different substrate levels were investigated. Biofilm detachment ratio and TTC-dehydrogenase activity (DHA) were two indexes to discuss the antimicrobial effects. The results showed that at the high substrate level, the biofilms characteristics (biomass, the content of protein, polysaccharide and EPS) were the higher than those at the medium and low substrate levels, however biofilm’s DHA at the medium substrate level (12.97 μgTF/(g h)) was higher than those at the medium substrate level (7.64 μgTF/(g h)) and low substrate level (1.94 μgTF/(g h). The difference of substrate level in the media resulted in different biofilm structure. By contrast with the control experiment, biofilm detachment ratios were all increased in three media with ClO₂ and BDMDAC addition. After ClO₂ addition, MITs were 30, 120 and 240 min and MIC was 1, 4 and 6 mg/L, respectively, at the low, medium and high substrate level. After BDMDAC addition, MITs in three media were all longer than those after ClO₂ addition, MIC was 200, 300 and 400 mg/L, respectively, at the low, medium and high substrate level.