Use of diluted medium in repeated-batch fermentation for production of lignin peroxidase by <Emphasis Type="Italic">Phanerochaete chrysosporium</Emphasis>

Lignin peroxidase has been extensively studied due to the potential use of this enzyme in environmental pollution control. Important aspects of the production of the enzyme by the white rot fungus, Phanerochaete chrysosporium, include the improvement of yield results and cell maintenance. In the present work, Phanerochaete chrysosporium was immobilized in polyurethane foam and used for repeated-batch fermentations with various dilution of the initial medium (D), and lignin peroxidase production was investigated. The peak of 283 ± 17.5 U lignin peroxidase/l production rate was obtained at a D of 1/5, with significantly lower production rates seen at higher and lower dilution ratios. When six cycles of repeated-batch fermentation were conducted using a D of 1/5, the results revealed that at least four cycles of repeated-batch fermentation were possible with a high lignin peroxidase production rate under a cut-off value of 178 ± 3.87 U/l. Furthermore, the cell-free culture broth could be successfully concentrated to 2,800 U/l by ultrafiltration. Thus, the present study shows that optimizing the dilution of the utilized nutritional medium can improve repeated batch production of lignin peroxidase from immobilized P. chrysosporium, in terms of both cycle number and output.     

A novel strategy to construct yeast Saccharomyces cerevisiae strains for very high gravity fermentation

Very high gravity (VHG) fermentation is aimed to considerably increase both the fermentation rate and the ethanol concentration, thereby reducing capital costs and the risk of bacterial contamination. This process results in critical issues, such as adverse stress factors (ie., osmotic pressure and ethanol inhibition) and high concentrations of metabolic byproducts which are difficult to overcome by a single breeding method. In the present paper, a novel strategy that combines metabolic engineering and genome shuffling to circumvent these limitations and improve the bioethanol production performance of Saccharomyces cerevisiae strains under VHG conditions was developed. First, in strain Z5, which performed better than other widely used industrial strains, the gene GPD2 encoding glycerol 3-phosphate dehydrogenase was deleted, resulting in a mutant (Z5ΔGPD2) with a lower glycerol yield and poor ethanol productivity. Second, strain Z5ΔGPD2 was subjected to three rounds of genome shuffling to improve its VHG fermentation performance, and the best performing strain SZ3-1 was obtained. Results showed that strain SZ3-1 not only produced less glycerol, but also increased the ethanol yield by up to 8% compared with the parent strain Z5. Further analysis suggested that the improved ethanol yield in strain SZ3-1 was mainly contributed by the enhanced ethanol tolerance of the strain. The differences in ethanol tolerance between strains Z5 and SZ3-1 were closely associated with the cell membrane fatty acid compositions and intracellular trehalose concentrations. Finally, genome rearrangements in the optimized strain were confirmed by karyotype analysis. Hence, a combination of genome shuffling and metabolic engineering is an efficient approach for the rapid improvement of yeast strains for desirable industrial phenotypes.     

Glucose ester enabled acylation in plant specialized metabolism

Acylation of core compound skeletons, together with other modifications, plays a significant role in producing the incredible diversity of plant specialized metabolites. Two major classes of acyltransferases, the BAHD and serine carboxypeptidase-like (SCPL) acyltransferases, can bring together through acylation compounds from the same or divergent metabolic pathways. BAHD acyltransferases (BAHD-ATs) employ CoA thioesters as the activated substrate, SCPL acyltransferases (SCPL-ATs), on the other hand, utilize β-acetal esters, typically glucose esters formed by UDP glycosyltransferases (UGTs). While the general trend of high energy glucose ester enabled acyltransfers is seen throughout the spermatophytes (seed plants), the specific metabolites that are conjugated appear to be lineage specific. In this review, we examine the reaction mechanism, biochemical property and evolutionary relationship of SCPL-ATs that utilize various glucose ester donors and acceptors from the same or different plant specialized metabolic pathways. The occurrence and taxonomic distribution of galloylated flavan-3-ols, hydrolyzable tannins and galloylated flavonols are also evaluated. Furthermore, glucose ester (acyl donor)-forming UGT activities and the subcellular localization of the UGT and SCPL-AT catalyzed reactions are discussed.     

Construction of a high-density genetic map of <Emphasis Type="Italic">Ziziphus jujuba</Emphasis> Mill. using genotyping by sequencing technology

The Chinese jujube (Ziziphus jujuba Mill., 2n = 2 × = 24), one of the most popular fruit trees in China, is widely cultivated and utilized in Asia. High-density genetic linkage maps are valuable resources for molecular breeding and functional genomics; however, they are still under-developed for the jujube. The genotyping by sequencing (GBS) strategy could be an efficient and cost-effective tool for single nucleotide polymorphism (SNP) discovery based on the sequenced jujube genome. Here, we report a new high-density genetic map constructed using GBS technology. An F1 population with 145 progenies and their parents (‘Dongzao’ × ‘Zhongningyuanzao’) were sequenced on the Illumina HiSeq 4000 platform. In total, 79.8 Gb of raw data containing 256,708,177 paired-end reads were generated. After data filtering and SNP genotyping, 40,372 polymorphic SNP markers were developed between the parents and 2540 (1756 non-redundant) markers were mapped onto the integrated genetic linkage map. The map spanned 1456.53 cM and was distributed among 12 linkage groups, which is consistent with the haploid chromosome number of the jujube. The average marker interval was 0.88 cM. The genetic map allowed us to anchor 224 Mb (63.7 %) of scaffolds from the sequenced ‘Junzao’ genome, containing 52 newly anchored scaffolds, which extended the genome assembly by 7 Mb. In conclusion, GBS technology was applied efficiently for SNP discovery in this study. The high-density genetic map will serve as a unique tool for molecular-assisted breeding and genomic studies, which will contribute to further research and improvement of the jujube in the near future.     

Over-expressing <Emphasis Type="Italic">GLT1</Emphasis> in a <Emphasis Type="Italic">gpd2</Emphasis>Δ mutant of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> to improve ethanol production

We constructed two recombinant strains of Saccharomyces cerevisiae in which the GPD2 gene was deleted using a one-step gene replacement method to minimize formation of glycerol and improve ethanol production. In addition, we also over-expressed the GLT1 gene by a two-step gene replacement method to overcome the redox-imbalancing problem in the genetically modified strains. The result of anaerobic batch fermentations showed that the rate of growth and glucose consumption of the KAM-5 (MATα ura3 gpd2Δ::RPT) strain were slower than the original strain, and the KAM-13 (MATα ura3 gpd2Δ::RPT P _PGK -GLT1) strain, however, was indistinguishable compared to the original strain using the same criteria, as analyzed. On the other hand, when compared to the original strain, there were 32 and 38% reduction in glycerol formation for KAM-5 and KAM-13, respectively. Ethanol production increased by 8.6% for KAM-5 and 13.4% for KAM-13. Dramatic reduction in acetate and pyruvic acid was also observed in both mutants compared to the original strains. Although gene GPD2 is responsible for the glycerol synthesis, the mutant KAM-13, in which glycerol formation was substantially reduced, was able to cope and maintain osmoregulation and redox balance and have increased ethanol production under anaerobic fermentations. The result verified the proposed concept of increasing ethanol production in S. cerevisiae by genetic engineering of glycerol synthesis and over-expressing the GLT1 gene along with reconstituted nicotinamide adenine dinucleotide metabolism.     

Leaf traits of natural populations of <Emphasis Type="Italic">Adiantum reniforme</Emphasis> var. <Emphasis Type="Italic">sinensis</Emphasis>, endemic to the Three Gorges region in China

Leaf mass per unit area (LMA), carbon and nitrogen contents, leaf construction cost, and photosynthetic capacity (P _max) of Adiantum reniforme var. sinensis, an endangered fern endemic to the Three Gorges region in southwest China, were compared in five populations differing in habitat such as soil moisture and irradiance. The low soil moisture and high irradiance habitat population exhibited significantly higher LMA, area-based leaf construction (CC_A), and carbon content (C_A), but lower leaf nitrogen content per unit dry mass (N_M) than the other habitat populations. The high soil moisture and low irradiance habitat populations had the lowest CC_A, but their cost/benefic ratios of CCA/P _max were similar to the medium soil moisture and irradiance habitat population due to their lower leaf P _max. Hence A. reniforme var. sinensis prefers partially shaded, moist but well-drained, slope habitats. Due to human activities, however, its main habitats now are cliffs or steeply sloped bare rocks with poor and thin soil. The relatively high energy requirements and low photosynthetic capacity in these habitats could limit the capability of the species in extending population or interspecific competition and hence increase its endangerment.     

History and evolution of the International Association for Plant Biotechnology (IAPB): 1963–2008

The International Association for Plant Biotechnology (IAPB) was founded in 1963 at the first truly international conference on plant tissue culture, which was organized by Philip R. White. White was a devoted internationalist and was strongly committed to global scientific cooperation. He felt that the time had come for the international tissue culture community to organize so that it could meet regularly and provide a forum to its members for the exchange of ideas and information of mutual interest and use. The various activities of the IAPB since its founding—the publication of its newsletter, its journal, and the proceedings of its quadrennial congresses—faithfully document the remarkable advances in plant biotechnology that were made possible by the successful integration of tissue culture and molecular biology. In particular, the congress proceedings serve as time capsules, providing a wealth of information about the best of science and the most prominent scientists of the time. The history of the IAPB is indeed the history of plant biotechnology.     

Rebound effects of price differences

Goal, Scope and Background  Traditionally, comparative life cycle assessments (LCA) have not considered rebound effects, for instance in case of significant price differences among the compared products. No justifications have been made for this delimitation in scope. This article shows that price differences and the consequent effects of marginal consumer expenditure may influence the conclusions of comparative LCA significantly. We also show that considerations about rebound effects of price differences can be included in LCAs. Methods  The direct rebound effect of a price difference is marginal consumption. Based on statistical data on private consumption in different income groups (Statistics Denmark 2005a, 2005b), the present article provides an estimate of how an average Danish household will spend an additional 1 DKK for further consumer goods, when the household has gained money from choosing a cheaper product alternative. The approach is to use marginal income changes and the following changes in consumption patterns as an expression for marginal consumption. Secondly, the environmental impact potentials related to this marginal consumption are estimated by the use of environmental impact intensity data from an IO-LCA database (Weidema et al. 2005). Finally, it is discussed whether, and in which ways the conclusions of comparative LCAs can be affected by including the price difference between product alternatives. This is elucidated in a case study of a comparative LCA screening of two different kinds of Danish cheese products (Fricke et al. 2004). Results  Car purchase and driving, use and maintenance of dwelling, clothing purchase and insurance constitutes the largest percentages of the marginal consumption. In a case study of two cheeses, the including the impact potentials related to the price difference results in significant changes in the total impact potentials. Considering the relatively small price difference of the two products, it is likely also to have a significant influence on the results of comparative LCAs more generally. Discussion  The influence of marginal consumption in comparative LCAs is relevant to consider in situations with large differences in the price of the product alternatives being compared, and in situations with minor differences in the impact potentials related to the alternatives. However, different uncertainties are linked to determining the pattern for marginal consumption and the environmental impact potential related to this. These are first of all related to the method used, but also include inaccurate data of consumption in households, aggregation and weighting of income groups, aggregation of product groups, estimation and size of the price difference, and the general applicability of the results. Conclusion  Incorporating marginal consumption in consequential LCAs is possible in practice. In the case study used, including the rebound effects of the price difference has a significant influence on the result of the comparative LCA, as the result for the impact categories acidification and nutrient enrichment changes in favour of the expensive product. Recommendations and Perspectives  It is recommended that the rebound effects of price differences should be included more frequently in LCAs. In order to ensure this, further research in marginal consumption and investment patterns and IO data for different countries or regions is required. Furthermore, this study does not consider the economic distributional consequences of buying an expensive product instead of a cheaper product (e.g. related to how the profit is spent by those who provided the product). It should also be noted, that more expensive products not necessarily result in less consumption, as those who provided the product also will spend the money they have earned from the sale. Ideally, these consequences should also be further investigated. Likewise, the development of databases to include marginal consumption in PC-tools is needed. In general, considerations of marginal consumption would favour expensive product alternatives, depending, however, on the type of consumer. ESS-Submission Editor: Dr. David Hunkeler (david.hunkeler@aquaplustech.ch)     

人新基因hbrp的染色体定位及其对TPK活性的抑制作用（简报）

hbrp(Human BSP-Related Protein)是我们实验室最近在睾丸组织中克隆的一个人与BSP（bovine seminal plasma)蛋白相关的新基因。为了将有关该新基因信息与现有人类基因组转录图相整合,我们应用荧光原位杂交(fluorescent in situ hybridizationFISH)法进行了该基因的人染色体基因定位,结果成功地将hbrp基因定位在人19号染色体长臂1区3带上。hbrp基因是在对BSP蛋白功能的研究过程中发现并克隆的,其同源性分析发现,与其序列最相近     

缺氧环境下白细胞介素8通过Akt-STAT3通路提高骨髓间充质干细胞自噬和增殖能力

探讨缺氧环境下,白细胞介素8(Interleukin-8,IL-8)对人骨髓间充质干细胞(Human bone marrow mesenchymal stem cells,hBMSC)增殖和自噬能力的影响以及机制。在缺氧模型下,未进行刺激的hBMSC为缺氧对照组;以100μmol/L人IL-8蛋白刺激的MSC为IL-8组;若先添加50μmol/L MK2206(Akt蛋白抑制剂)培养30 min,然后再添加100μmol/L IL-8则为Akt抑制剂组,在正常条件下培养的MSC为正常对照组。利用Ed U细胞增殖实验、TUNEL细胞凋亡实验、Western blotting或ELISA等实验分别检测各组MSC细胞Ed U标记阳性细胞的数目、细胞凋亡、自噬蛋白(LC-3)和Akt/STAT3等蛋白的表达。相对于缺氧对照组和Akt抑制剂组,IL-8明显提高hBMSC增殖和细胞自噬,并降低hBMSC的凋亡率,IL-8组hBMSC的Akt、STAT3和VEGF等蛋白表达增高。结果表明,缺氧环境下,IL-8通过Akt-STAT3通路发挥对MSC的保护作用,对保护MSC抗缺血缺氧性损伤,促进MSC在再生医学中应用具有重要意义。