Iterative Saturation Mutagenesis of ?6 Subsite Residues in Cyclodextrin Glycosyltransferase from Paenibacillus macerans To Improve Maltodextrin Specificity for 2-O-d-Glucopyranosyl-l-Ascorbic Acid Synthesis

2-O-d-Glucopyranosyl-l-ascorbic acid (AA-2G), a stable l-ascorbic acid derivative, is usually synthesized by cyclodextrin glycosyltransferase (CGTase), which contains nine substrate-binding subsites (from +2 to −7). In this study, iterative saturation mutagenesis (ISM) was performed on the −6 subsite residues (Y167, G179, G180, and N193) in the CGTase from Paenibacillus macerans to improve its specificity for maltodextrin, which is a cheap and easily soluble glycosyl donor for AA-2G synthesis. Site saturation mutagenesis of four sites—Y167, G179, G180, and N193—was first performed and revealed that four mutants—Y167S, G179R, N193R, and G180R—produced AA-2G yields higher than those of other mutant and wild-type CGTases. ISM was then conducted with the best positive mutant as a template. Under optimal conditions, mutant Y167S/G179K/N193R/G180R produced the highest AA-2G titer of 2.12 g/liter, which was 84% higher than that (1.15 g/liter) produced by the wild-type CGTase. Kinetics analysis of AA-2G synthesis using mutant CGTases confirmed the enhanced maltodextrin specificity and showed that compared to the wild-type CGTase, the mutants had no cyclization activity but high hydrolysis and disproportionation activities. A possible mechanism for the enhanced substrate specificity was also analyzed through structure modeling of the mutant and wild-type CGTases. These results indicated that the −6 subsite played crucial roles in the substrate binding and catalytic reactions of CGTase and that the obtained CGTase mutants, especially Y167S/G179K/N193R/G180R, are promising starting points for further development through protein engineering.     

Microbial production of glucosamine and N-acetylglucosamine: advances and perspectives

Glucosamine (GlcN), an amino sugar, is a compound derived from substitution of a hydroxyl group of a glucose molecule with an amino group. GlcN and its acetylated derivative, N-acetylglucosamine (GlcNAc), have been widely used in food, cosmetics, and pharmaceutical industries and are currently produced by acid hydrolysis of chitin (a linear polymer of GlcNAc) extracted from crab and shrimp shells. Microbial fermentation by filamentous fungi or recombinant Escherichia coli, as an alternative method for the production of GlcN and GlcNAc, is attracting increasing attention because it is an environmentally friendly process. Although the microbial production of GlcN and GlcNAc is hampered by low yield and high production cost, considerable advances have been made in recent years. Here we review the applications, commercial market, and production of GlcN and GlcNAc, with emphasis on the metabolic and process engineering strategies used to improve GlcN and GlcNAc production by recombinant microbes.     

Characterization and expression of cytoplasmic copper/zinc superoxide dismutase (CuZn SOD) gene under temperature and hydrogen peroxide (H2O2) in rotifer Brachionus calyciflorus

Superoxide dismutase (SOD, EC 1.15.1.1) is an important antioxidant enzyme that protects organs from damage by reactive oxygen species (ROS). We cloned cDNA encoding SOD activated with copper/zinc (CuZn SOD) from the rotifer Brachionus calyciflorus Pallas. The full-length cDNA of CuZn SOD was 692 bp and had a 465 bp open reading frame encoding 154 amino acids. The deduced amino acid sequence of B. calyciflorus CuZn SOD showed 63.87%, 60.00%, 59.74% and 48.89% similarity with the CuZn SOD of the Ctenopharyn godonidella, Schistosoma japonicum, Drosophila melanogaster and Caenorhabditis elegans, respectively. The phylogenetic tree constructed based on the amino acid sequences of CuZn SODs from B. calyciflorus and other organisms revealed that rotifer is closely related to nematode. Analysis of the expression of CuZn SOD under different temperatures (15, 30 and 37 °C) revealed that its expression was enhanced 4.2-fold (p < 0.001) at 30 °C after 2 h, however, the lower temperature (15 °C) promoted CuZn SOD transiently (4.1-fold, p < 0.001) and then the expression of CuZn SOD decreased to normal level (p > 0.05). When exposed to H₂O₂ (0.1 mM), CuZn SOD, manganese superoxide dismutase (Mn SOD) and catalase (CAT) gene were upregulated, and in addition, the mRNA expression of CuZn SOD gene was induced instantaneously after exposure to vitamin E. It indicates that the CuZn SOD gene would be an important gene in response to oxidative and temperature stress.     

Structure-Guided Systems-Level Engineering of Oxidation-Prone Methionine Residues in Catalytic Domain of an Alkaline α-Amylase from Alkalimonas amylolytica for Significant Improvement of Both Oxidative Stability and Catalytic Efficiency

High oxidative stability and catalytic efficiency are required for the alkaline α-amylases to keep the enzymatic performance under the harsh conditions in detergent industries. In this work, we attempted to significantly improve both the oxidative stability and catalytic efficiency of an alkaline α-amylase from Alkalimonas amylolytica by engineering the five oxidation-prone methionine residues around the catalytic domain via a systematic approach. Specifically, based on the tertiary structure analysis, five methionines (Met 145, Met 214, Met 229, Met 247 and Met 317) were individually substituted with oxidation-resistant threonine, isoleucine and alaline, respectively. Among the created 15 mutants, 7 mutants M145A, M145I, M214A, M229A, M229T, M247T and M317I showed significantly enhanced oxidative stability or catalytic efficiency. In previous work, we found that the replacement of M247 with leucine could significantly improve the oxidative stability. Thus, these 8 positive mutants (M145A, M145I, M214A, M229A, M229T, M247T, M247L and M317I) were used to conduct the second round of combinational mutations. Among the constructed 85 mutants (25 two-point mutants, 36 three-point mutants, 16 four-point mutants and 8 five-point mutants), the mutant M145I-214A-229T-247T-317I showed a 5.4-fold increase in oxidative stability and a 3.0-fold increase in catalytic efficiency. Interestingly, the specific activity, alkaline stability and thermal stability of this mutant were also increased. The increase of salt bridge and hydrogen bonds around the catalytic domain contributed to the significantly improved catalytic efficiency and stability, as revealed by the three-dimensional structure model of wild-type alkaline α-amylase and its mutant M145I-214A-229T-247T-317I. With the significantly improved oxidative stability and catalytic efficiency, the mutant M145I-214A-229T-247T-317I has a great potential as a detergent additive, and this structure-guided systems engineering strategy may be useful for the protein engineering of the other microbial enzymes to fulfill industrial requirements.     

Synthetic repetitive extragenic palindromic (REP) sequence as an efficient mRNA stabilizer for protein production and metabolic engineering in prokaryotic cells

In prokaryotic cells, 3′–5′ exonucleases can attenuate messenger RNA (mRNA) directionally from the direction of the 3′–5′ untranslated region (UTR), and thus improving the stability of mRNAs without influencing normal cell growth and metabolism is a key challenge for protein production and metabolic engineering. Herein, we significantly improved mRNA stability by using synthetic repetitive extragenic palindromic (REP) sequences as an effective mRNA stabilizer in two typical prokaryotic microbes, namely, Escherichia coli for the production of cyclodextrin glucosyltransferase (CGTase) and Corynebacterium glutamicum for the production of N-acetylglucosamine (GlcNAc). First, we performed a high-throughput screen to select 4 out of 380 REP sequences generated by randomizing 6 nonconservative bases in the REP sequence designed as the degenerate base “N.” Secondly, the REP sequence was inserted at several different positions after the stop codon of the CGTase-encoding gene. We found that mRNA stability was improved only when the space between the REP sequence and stop codon was longer than 12 base pairs (bp). Then, by reconstructing the spacer sequence and secondary structure of the REP sequence, a REP sequence with 8 bp in a stem-loop was obtained, and the CGTase activity increased from 210.6 to 291.5 U/ml. Furthermore, when this REP sequence was added to the 3′-UTR of glucosamine-6-phosphate N-acetyltransferase 1 ( GNA1), which is a gene encoding a key enzyme GNA1 in the GlcNAc synthesis pathway, the GNA1 activity was increased from 524.8 to 890.7 U/mg, and the GlcNAc titer was increased from 4.1 to 6.0 g/L in C. glutamicum. These findings suggest that the REP sequence plays an important function as an mRNA stabilizer in prokaryotic cells to stabilize its 3′-terminus of the mRNA by blocking the processing action of the 3′–5′ exonuclease. Overall, this study provides new insight for the high-efficiency overexpression of target genes and pathway fine-tuning in bacteria.     

Pathway Engineering of Bacillus subtilis for Enhanced N‐Acetylneuraminic Acid Production via Whole‐Cell Biocatalysis

N‐acetylneuraminic acid (NeuAc) is a common sialic acid that has a wide range of applications in nutraceuticals and pharmaceuticals. However, low production efficiency and high environmental pollution associated with traditional extraction and chemical synthesis methods constrain the supply of NeuAc. Here, a biological approach is developed for food‐grade NeuAc production via whole‐cell biocatalysis by the generally regarded as safe (GRAS) bacterium Bacillus subtilis (B. subtilis). Promoters for controlling N‐acetylglucosamine 2‐epimerase (AGE) and NeuAc adolase (NanA) are optimized, yielding 32.84 g L^?1 NeuAc production with a molar conversion rate of 26.55% from N‐acetylglucosamine (GlcNAc). Next, NeuAc production is further enhanced to 46.04 g L^?1, which is 40.2% higher than that of the strain with promoter optimization, by expressing NanA from Staphylococcus hominis instead of NanA from Escherichia coli. To enhance the expression level of ShNanA, the N‐terminal coding sequences of genes with high expression levels are fused to the 5′‐end of the ShNanA gene, resulting in 56.82 g L^?1 NeuAc production. Finally, formation of the by‐product acetoin from pyruvate is blocked by deleting the alsS and alsD genes, resulting in 68.75 g L^?1 NeuAc production with a molar conversion rate of 55.57% from GlcNAc. Overall, a GRAS B. subtilis strain is demonstrated as a whole‐cell biocatalyst for efficient NeuAc production.     

Roles of tryptophan residue and disulfide bond in the variable lid region of oxidized polyvinyl alcohol hydrolase

Oxidized polyvinyl alcohol hydrolase (OPH) catalyzes the cleavage of C–C bond in β-diketone. It belongs to the α/β-hydrolase family and contains a unique lid region that covers the active site. The lid is the most variable region when pOPH from Pseudomonas sp. VM15C and sOPH from Sphingopyxis sp. 113P3 are compared. The wild-type enzymes and the pOPH mutants W255A, W255Y and W255F were analyzed for lipase activity by using p-nitrophenyl (pNP) esters as the substrates. The wild-type enzymes showed increased K_m and decreased k_cat/K_m with the acyl chain length, and the mutants showed reduced k_cat/K_m for pNP acetate, indicating the importance of Trp255 in sequestering the active site from solvent. The significantly lower activity for pNP butyrate can be a result of product inhibition, as suggested by the complex crystal structures, in which butyric acid, DMSO or PEG occupied the same substrate-binding cleft. The mutant activity was retained with pNP caprylate and pNP laurate as the substrates, reflecting the amphipathic nature of the cleft. Moreover, the disulfide bond formation of Cys257/267 is important for the activity of pOPH, but it is not essential for sOPH, which has a shorter lid structure.