Reductive activation of the coenzyme A/acetyl-CoA isotopic exchange reaction catalyzed by carbon monoxide dehydrogenase from Clostridium thermoaceticum and its inhibition by nitrous oxide and carbon monoxide

The final steps in the synthesis of acetyl-CoA by CO dehydrogenase (CODH) have been studied by following the exchange reaction between CoA and the CoA moiety of acetyl-CoA. This reaction had been studied earlier (Pezacka, E., and Wood, H. G. (1986) J. Biol. Chem. 261, 1609-1615 and Ramer, W. E., Raybuck, S. A., Orme-Johnson, W. H., and Walsh, C. T. (1989) Biochemistry 28, 4675-4680). The CoA/acetyl-CoA exchange activity was determined at various controlled redox potentials and was found to be activated by a one-electron reduction with half-maximum activity occurring at -486 mV. There is approximately 2000-fold stimulation of the exchange by performing the reaction at -575 mV relative to the rate at -80 mV. Binding of CoA to CODH is not sensitive to the redox potential; therefore, the reductive activation affects some step other than association/dissociation of CoA. We propose that a metal center on CODH with a midpoint reduction potential of less than or equal to -486 mV is activated by a one-electron reduction to cleave the carbonyl-sulfur bond and/or bind the acetyl group of acetyl-CoA. Based on a comparison of the redox dependence of this reaction with that for methylation of CODH (Lu, W-P., Harder, S. R., and Ragsdale, S. W. (1990) J. Biol. Chem. 265, 3124-3133) and CO2 reduction and formation of the Ni-Fe-C EPR signal (Lindahl, P. A., Münck, E., and Ragsdale, S. W. (1990) J. Biol. Chem. 265, 3873-3879), we propose that the assembly of the acetyl group of acetyl-CoA, i.e. binding the methyl group of the methylated corrinoid/iron-sulfur protein, binding CO, and methyl migration to form the acetyl-CODH intermediate, occur at the novel Ni-Fe3-4-containing site in CODH. CO has two effects on the CoA/acetyl-CoA exchange: it activates the reaction due to its reductive capacity and its acts as a noncompetitive inhibitor. We also discovered that the CoA/acetyl-CoA exchange was inhibited by nitrous oxide via an oxidative mechanism. In the presence of a low-potential electron donor, CODH becomes a nitrous oxide reductase which catalytically converts N2O to N2. This study combined with earlier results (Lu, W-P., Harder, S. R., and Ragsdale, S. W. (1990) J. Biol. Chem. 265, 3124-3133) establishes that the two-subunit form of CODH is completely active in all reactions known to be catalyzed by CODH.     

Applying the dark diversity concept to plants at the European scale

Large‐scale biodiversity maps are essential to macroecology. However, between‐region comparisons can be more useful if patterns of observed species richness are supplemented by variations in dark diversity – the absent portion of the species pool. We aim to quantify and map plant diversity across Europe by using a measure that accounts for both observed and dark diversity. To do this we need to delimit suitable species pools, and evaluate the potential and limitation of a large‐scale dataset. We used Atlas Florae Europaeae (ca 20% of European plant species mapped within 50 × 50 km grid cells) and defined for each grid cell several species pools by applying various geographical and environmental filters: geographic species pool (number of species within 500 km radius), biogeographic species pool (additionally incorporating species distribution patterns, i.e. dispersion fields), site‐specific species pool (additionally integrating environmental preferences of species based on species co‐occurrence). We integrated dark diversity and observed diversity at a relative scale to calculate the completeness of site diversity: logistic expression of observed and dark diversity. We tested whether our results are robust against regional variation in data availability. We used independent regional databases to test if Atlas Florae Europaeae is a representative subset of total species richness. Environmental filtering was the most influential determinant of species pool size with more species filtered out in southern Europe. Both observed and dark diversity adhered to the well‐known latitudinal gradient, but completeness of site diversity varied throughout Europe with no latitudinal trend. Dark diversity patterns were fairly insensitive to variations in regional sampling intensity. Atlas Florae Europaeae represented well the total variation in plant diversity. In summary, dark diversity and completeness of site diversity add valuable information to broad‐scale diversity patterns since observed diversity is expressed at a relative scale.     

Use of time in a decision‐making process by a parasitoid

1. Time perception is seldom studied in invertebrates, with the limited experimental evidence being insufficient to provide a comprehensive pattern of the capacity of invertebrates to measure time and use it in decision‐making processes. 2. In this study, it was hypothesized that insect parasitoids have evolved the capacity to measure time precisely and to use it to optimize foraging decisions related to host exploitation. To examine time perception in females of the gregarious egg parasitoid Trichogramma euproctidis, the present study used their ability to adjust their investment (number of eggs laid) in a host to the initial transit duration (interval between the first contact with the host and the following contact with the substrate). Females utilize this method to assess host egg size, as a large egg necessarily requires more time to evaluate than a small host. In this study, the initial transit duration for a given sized egg was artificially extended by suspending it. 3. For similar sized hosts, female T. euproctidis significantly increased both oviposition duration and progeny allocation following a longer initial transit duration. 4. These results demonstrate the intrinsic capacity of this parasitoid to measure time and to adjust their progeny investment accordingly. This is believed to be one of the few demonstrations of a retrospective measure of time in an invertebrate.     

From the Schnauzenorgan to the back: Morphological comparison of mormyromast electroreceptor organs at different skin regions of Gnathonemus petersii

The nocturnally active weakly electric fish Gnathonemus petersii is known to employ active electrolocation for the detection of objects and for orientation in its environment. The fish emits pulse‐type electric signals with an electric organ and perceives these signals with more than 3,000 epidermal electroreceptor organs, the mormyromasts, which are distributed over the animal's skin surface. In this study, we measured the metric dimensions of the mormyromasts from different body regions to find structural and functional specialization of the various body parts. We focused on the two foveal regions of G. petersii, which are located at the elongated and movable chin (the Schnauzenorgan; SO) and at the nasal region (NR), the skin region between the mouth and the nares. These two foveal regions were compared to the dorsal part (back) of the fish, which contains typical nonfoveal mormyromasts. While the gross anatomy of the mormyromasts from all skin regions is similar, the metric dimensions of the main substructures differed. The mormyromasts at the SO are the smallest and contain the smallest receptor cells. In addition, the number of receptor cells per organ is lowest at the SO. In contrast, at the back the biggest receptor organs with the highest amount of receptor cells per organ occur. The mormyromasts at the NR are in several respects intermediate between those from the back and the SO. However, mormyromasts at the NR are longer than those at all other skin regions, the canal leading from the receptor pore to the inner chambers were the longest and the overlaying epidermal layers are the thickest. These results show that mormyromasts and the epidermis they are embedded in at both foveal regions differ specifically from those found on the rest of the body. The morphological specializations lead to functional specialization of the two foveae. J. Morphol., 2012. © 2012 Wiley Periodicals, Inc.     

Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin

doi:10.1111/j.1741‐2358.2009.00333.x
Effect of microwave treatment on the shear bond strength of different types of commercial teeth to acrylic resin Objective: The purpose of this study was to verify the effect of microwave treatment on the shear bond strength of commercial types of teeth to acrylic resin, when the glossy ridge laps were unmodified (groups 1 and 5), bur abraded (groups 2 and 6), bur grooved (groups 3 and 7) or etched by monomer (groups 4 and 8). Background: Controversial findings have shown that mechanical or chemical changes in ridge‐lap surface of the tooth increase or decrease the bond strength between tooth and acrylic resin, and the microwave disinfection may cause different changes on this bond strength. Materials and methods: Eighty specimens (n = 10) were made with the acrylic resin bonded to tooth glossy ridge lap, polymerised in water at 74°C for 9 h, and deflasked after flask cooling. Specimens of the groups 5, 6, 7 and 8 were individually immersed in 150 ml of water and submitted to microwave treatment in an oven at 650 W for 3 min. Control specimens (groups 1, 2, 3 and 4) were not microwave treated. Shear bond strength test was performed in an Instron machine with a cross‐speed of 1 mm/min. Collected data were submitted to anova and Tukey’s test (α = 0.05). Results: Microwave treatment decreased the shear bond strength values of the tooth/resin bond. In the microwaved and non‐microwaved procedures, mechanical retention improved the shear bond strength when compared with the control and monomer treatments. Conclusion: Shear bond strength of the tooth/resin bond was influenced by the microwave treatment and different commercial teeth association, and was lower for the Biotone tooth.     

Selection for High Oridonin Yield in the Chinese Medicinal Plant Isodon (Lamiaceae) Using a Combined Phylogenetics and Population Genetics Approach

Oridonin is a diterpenoid with anti-cancer activity that occurs in the Chinese medicinal plant Isodon rubescens and some related species. While the bioactivity of oridonin has been well studied, the extent of natural variation in the production of this compound is poorly known. This study characterizes natural variation in oridonin production in order to guide selection of populations of Isodon with highest oridonin yield. Different populations of I. rubescens and related species were collected in China, and their offspring were grown in a greenhouse. Samples were examined for oridonin content, genotyped using 11 microsatellites, and representatives were sequenced for three phylogenetic markers (ITS, rps16, trnL-trnF). Oridonin production was mapped on a molecular phylogeny of the genus Isodon using samples from each population as well as previously published Genbank sequences. Oridonin has been reported in 12 out of 74 species of Isodon examined for diterpenoids, and the phylogeny indicates that oridonin production has arisen at least three times in the genus. Oridonin production was surprisingly consistent between wild-collected parents and greenhouse-grown offspring, despite evidence of gene flow between oridonin-producing and non-producing populations of Isodon. Additionally, microsatellite genetic distance between individuals was significantly correlated with chemical distance in both parents and offspring. Neither heritability nor correlation with genetic distance were significant when the comparison was restricted to only populations of I. rubescens, but this result should be corroborated using additional samples. Based on these results, future screening of Isodon populations for oridonin yield should initially prioritize a broad survey of all species known to produce oridonin, rather than focusing on multiple populations of one species, such as I. rubescens. Of the samples examined here, I. rubescens or I. japonicus from Henan province would provide the best source of oridonin.