The active site cysteine of ubiquitin-conjugating enzymes has a significantly elevated pKa: functional implications

Ubiquitin-conjugating enzymes (E2s or Ubcs) are essential components in the ubiquitination apparatus. These enzymes accept ubiquitin from an E1 enzyme and then, usually with the aid of an E3 enzyme, donate the ubiquitin to the target protein. The function of E2 relies critically on the chemistry of its active site cysteine residue since this residue must form a thioester bond with the carboxyl terminus of ubiquitin. Despite the plethora of structural information that is available, there has been a notable dearth of information regarding the chemical basis of E2 function. Toward filling this large void in our understanding of E2 function, we have examined the pK(a) of the active site cysteine using a combination of experimental and theoretical approaches. We find, remarkably, that the pK(a) of the active site cysteine residue is elevated by approximately 2 pH units above that of a free cysteine. We have identified residues that contribute to the increase in this pK(a). On the basis of experimental values obtained with three different E2 proteins, we believe this to be a general and important characteristic of E2 protein chemistry. Sequence comparison suggests that the electrostatic environment is maintained not through strict residue conservation but through different combinations of residues near the active site. We propose that the elevated pK(a) is a regulatory mechanism that prevents the highly exposed cysteine residue in free E2 from reacting promiscuously with electron deficient chemical moieties in the cell.     

A Dated Phylogeny Complements Macroecological Analysis to Explain the Diversity Patterns in Geonoma (Arecaceae)

Integrating phylogenetic data into macroecological studies of biodiversity patterns may complement the information provided by present‐day spatial patterns. In the present study, we used range map data for all Geonoma (Arecaceae) species to assess whether Geonoma species composition forms spatially coherent floristic clusters. We then evaluated the extent to which the spatial variation in species composition reflects present‐day environmental variation vs. nonenvironmental spatial effects, as expected if the pattern reflects historical biogeography. We also examined the degree of geographic structure in the Geonoma phylogeny. Finally, we used a dated phylogeny to assess whether species richness within the floristic clusters was constrained by a specific historical biogeographic driver, namely time‐for‐diversification. A cluster analysis identified six spatially coherent floristic clusters, four of which were used to reveal a significant geographic phylogenetic structure. Variation partitioning analysis showed that 56 percent of the variation in species composition could be explained by spatial variables alone, consistent with historical factors having played a major role in generating the Geonoma diversity pattern. To test for a time‐for‐diversification effect, we correlated four different species richness measures with the diversification time of the earliest large lineage that is characteristic of each cluster. In support of this hypothesis, we found that geographic areas with higher richness contained older radiations. We conclude that current geographic diversity patterns in Geonoma reflect the present‐day climate, but to a larger extent are related to nonenvironmental spatial constraints linked to colonization time, dispersal limitation, and geological history, followed by within‐area evolutionary diversification. Abstract in Spanish is available at http://www.blackwell‐synergy.com/loi/btp .     

Sb‐Doped SnO2 Hollow Spheres Offering Micro‐ and Nanoporosity in Fuel Cell Electrode Structures

Sb‐doped SnO₂ (ATO) is used as an alternative support material to replace carbon in the highly corrosive environment of a fuel cell cathode. Two ATO powders with different morphologies are decorated with Pt nanoparticles and afterwards used as the cathode catalyst. The commercial ATO powder exhibits crystallites in the nanometer range, while the home‐made ATO powder, which was synthesized by ultrasonic spray pyrolysis, consists of polycrystalline hollow spheres. The spheres have diameters in the micrometer range and are composed of individual nanocrystallites. The unusual morphology of the home‐made ATO offers nano‐ and microporosity at the same time and opens up new possibilities for the controlled design of electrode structures in low‐temperature polymer electrolyte fuel cells. Both materials are characterized by XRD, SEM, and TEM and tested in a single cell set‐up. While almost no current is gained from the membrane electrode assembly with the commercial ATO support, the cell with the home‐made ATO achieves a mediocre performance. This higher activity, however, is obtained with approximately half the Pt content compared to the catalyst with the commercial support. The different behaviours of both ATO powders can therefore mainly be attributed to differences in the specific support morphology.     

Cyclohexane-1,2-dione hydrolase from denitrifying Azoarcus sp. strain 22Lin, a novel member of the thiamine diphosphate enzyme family

Alicyclic compounds with hydroxyl groups represent common structures in numerous natural compounds, such as terpenes and steroids. Their degradation by microorganisms in the absence of dioxygen may involve a C-C bond ring cleavage to form an aliphatic intermediate that can be further oxidized. The cyclohexane-1,2-dione hydrolase (CDH) (EC 3.7.1.11) from denitrifying Azoarcus sp. strain 22Lin, grown on cyclohexane-1,2-diol as a sole electron donor and carbon source, is the first thiamine diphosphate (ThDP)-dependent enzyme characterized to date that cleaves a cyclic aliphatic compound. The degradation of cyclohexane-1,2-dione (CDO) to 6-oxohexanoate comprises the cleavage of a C-C bond adjacent to a carbonyl group, a typical feature of reactions catalyzed by ThDP-dependent enzymes. In the subsequent NAD(+)-dependent reaction, 6-oxohexanoate is oxidized to adipate. CDH has been purified to homogeneity by the criteria of gel electrophoresis (a single band at ～59 kDa; calculated molecular mass, 64.5 kDa); in solution, the enzyme is a homodimer (～105 kDa; gel filtration). As isolated, CDH contains 0.8 ± 0.05 ThDP, 1.0 ± 0.02 Mg(2+), and 1.0 ± 0.015 flavin adenine dinucleotide (FAD) per monomer as a second organic cofactor, the role of which remains unclear. Strong reductants, Ti(III)-citrate, Na(+)-dithionite, and the photochemical 5-deazaflavin/oxalate system, led to a partial reduction of the FAD chromophore. The cleavage product of CDO, 6-oxohexanoate, was also a substrate; the corresponding cyclic 1,3- and 1,4-diones did not react with CDH, nor did the cis- and trans-cyclohexane diols. The enzymes acetohydroxyacid synthase (AHAS) from Saccharomyces cerevisiae, pyruvate oxidase (POX) from Lactobacillus plantarum, benzoylformate decarboxylase from Pseudomonas putida, and pyruvate decarboxylase from Zymomonas mobilis were identified as the closest relatives of CDH by comparative amino acid sequence analysis, and a ThDP binding motif and a 2-fold Rossmann fold for FAD binding could be localized at the C-terminal end and central region of CDH, respectively. A first mechanism for the ring cleavage of CDO is presented, and it is suggested that the FAD cofactor in CDH is an evolutionary relict.     

Identification of a Caldariomyces fumago Mutant Secreting an Inactive Form of Chloroperoxidase Lacking the Heme Group and N-Glycans

By mutant colony screening of Caldariomyces fumago a mutant was isolated which was slightly greenish on fructose minimal medium and grew slower in comparison to the wild type. The supernatant samples lacked the Soret band typical for the heme group of the CPO and nearly no CPO activity was detected. SDS-PAGE analysis of mutant culture supernatant samples showed production of a 38–40 kDa protein while wild type samples contain the 42 kDa CPO protein. Protein identification using nanoLC-ESI-MS/MS was performed and based on three peptides the protein in the mutant culture was identified as CPO. No differences in the CPO gene sequences of wild type and mutant were found indicating a post-translational defect in protein maturation. Deglycosylation experiments using CPO from wild type and mutant were carried out. After removing N-linked oligosaccharides from wild type CPO a protein band at 38–40 kDa was detected. Our results reveal that the mutant protein lacks the heme group as well as the N-glycans.     

BCL::Fold - De Novo Prediction of Complex and Large Protein Topologies by Assembly of Secondary Structure Elements

Computational de novo protein structure prediction is limited to small proteins of simple topology. The present work explores an approach to extend beyond the current limitations through assembling protein topologies from idealized α-helices and β-strands. The algorithm performs a Monte Carlo Metropolis simulated annealing folding simulation. It optimizes a knowledge-based potential that analyzes radius of gyration, β-strand pairing, secondary structure element (SSE) packing, amino acid pair distance, amino acid environment, contact order, secondary structure prediction agreement and loop closure. Discontinuation of the protein chain favors sampling of non-local contacts and thereby creation of complex protein topologies. The folding simulation is accelerated through exclusion of flexible loop regions further reducing the size of the conformational search space. The algorithm is benchmarked on 66 proteins with lengths between 83 and 293 amino acids. For 61 out of these proteins, the best SSE-only models obtained have an RMSD100 below 8.0 Å and recover more than 20% of the native contacts. The algorithm assembles protein topologies with up to 215 residues and a relative contact order of 0.46. The method is tailored to be used in conjunction with low-resolution or sparse experimental data sets which often provide restraints for regions of defined secondary structure.     

Systematic comparison of two novel,thiol-reactive prosthetic groups for <Superscript>18</Superscript>F labeling of peptides and proteins with the acylation agent succinimidyl-4-[<Superscript>18</Superscript>F]fluorobenzoate ([<Superscript>18</Superscript>F]SFB)

A systematic comparison of 4-[¹⁸F]fluorobenzaldehyde-O-(2-{2-[2-(pyrrol-2,5-dione-1-yl)ethoxy]-ethoxy}-ethyl)oxime ([¹⁸F]FBOM) and 4-[¹⁸F]fluorobenzaldehyde-O-[6-(2,5-dioxo-2,5-dihydro-pyrrol-1-yl)-hexyl]oxime ([¹⁸F]FBAM) as prosthetic groups for the mild and efficient ¹⁸F labeling of cysteine-containing peptides and proteins with the amine-group reactive acylation agent, succinimidyl-4-[¹⁸F]fluorobenzoate ([¹⁸F]SFB), is described. All three prosthetic groups were prepared in a remotely controlled synthesis module. Synthesis of [¹⁸F]FBOM and [¹⁸F]FBAM was accomplished via oxime formation through reaction of appropriate aminooxy-functionalized labeling precursors with 4-[¹⁸F]fluorobenzaldehyde. The obtained radiochemical yields were 19% ([¹⁸F]FBOM) and 29% ([¹⁸F]FBAM), respectively. Radiolabeling involving [¹⁸F]FBAM and [¹⁸F]FBOM was exemplified by the reaction with cysteine-containing tripeptide glutathione (GSH), a cysteine-containing dimeric neurotensin derivative, and human native low-density lipoprotein (nLDL) as model compounds. Radiolabeling with the acylation agent [¹⁸F]SFB was carried out using a dimeric neurotensin derivative and nLDL. Both thiol-group reactive prosthetic groups show significantly better labeling efficiencies for the peptides in comparison with the acylation agent [¹⁸F]SFB. The obtained results demonstrate that [¹⁸F]FBOM is especially suited for the labeling of hydrophilic cysteine-containing peptides, whereas [¹⁸F]FBAM shows superior labeling performance for higher molecular weight compounds as exemplified for nLDL apolipoprotein constituents. However, the acylation agent [¹⁸F]SFB is the preferred prosthetic group for labeling nLDL under physiological conditions.