Synthetic and novel biocatalytic resolution studies on (+/-)-5/6/7-acetoxy-4-aryl-3,4-dihydrocoumarins

Eleven (+/-)-5/6/7-acetoxy-4-aryl-3,4-dihydrocoumarins have been synthesised in two steps starting from the coupling of cinnamic acid/substituted cinnamic acid with appropriate phenols, followed by acetylation in 50-83% overall yields. All hydroxy- and acetoxycoumarins were unambiguously identified on the basis of their spectral data. Candida antarctica lipase-catalysed deacetylation of these racemic acetoxydihydrocoumarins in dioxane occurred with moderate enantioselectivity. This is one of the rare examples of resolution using phenolic ester moiety as a remote handle for chiral recognition by a lipase.     

Biomimetic synthesis of a water soluble conducting molecular complex of polyaniline and lignosulfonate

A new biomimetic route for the synthesis of a conducting molecular complex of polyaniline (Pani) and a natural polyelectrolyte, lignosulfonate (LGS) is presented. A poly(ethylene glycol) modified hematin (PEG-hematin) was used to catalyze the polymerization of aniline in the presence of LGS to form a Pani/LGS complex. UV-vis, FTIR, conductivity and TGA studies for the LGS-polyaniline complex indicate the presence of a thermally stable and electrically conductive form of polyaniline. Also the presence of LGS in this complex, an inexpensive byproduct from pulp processing, provides a unique combination of properties such as electronic conductivity, processability and biodegradability. The use of this conductive complex for corrosion protection is also proposed.     

Mechanism of formation of a productive molten globule form of barstar

Structural analysis of the initial steps in protein folding is difficult because of the swiftness with which these steps occur. Hence, the link between initial polypeptide chain collapse and formation of secondary and other specific structures remains poorly understood. Here, an equilibrium model has been developed for characterizing the initial steps of folding of the small protein barstar, which lead to the formation of a productive molten globule in the folding pathway. In this model, the high-pH-unfolded form (D form) of barstar, which is shown to be as unstructured as the urea-denatured form, is transformed progressively into a molten globule B form by incremental addition of the salt Na(2)SO(4) at pH 12. At very low concentrations of Na(2)SO(4), the D form collapses into a pre-molten globule (P) form, whose volume exceeds that of the native (N) state by only 20%, and which lacks any specific structure as determined by far- and near-UV circular dichroism. At higher concentrations of Na(2)SO(4), the P form transforms into the molten globule (B) form in a highly noncooperative transition populated by an ensemble of at least two intermediates. The B form is a dry molten globule in which water is excluded from the core, and in which secondary structure develops to 65% and tertiary contacts develop to 40%, relative to that of the native protein. Kinetic refolding experiments carried out at pH 7 and at high Na(2)SO(4) concentrations, in which the rate of folding of the D form to the N state is compared to that of the B form to the N state, indicate conclusively that the B form is a productive intermediate that forms on the direct pathway of folding from the D form to the N state.     

Backbone dynamics of free barnase and its complex with barstar determined by 15N NMR relaxation study

Backbone dynamics of uniformly ¹⁵N-labeled free barnase and its complex with unlabelled barstar have been studied at 40°C, pH 6.6, using ¹⁵N relaxation data obtained from proton-detected 2D {¹H}-¹⁵N NMR spectroscopy. ¹⁵N spin-lattice relaxation rate constants (R₁), spin-spin relaxation rate constants (R₂), and steady-state heteronuclear {¹H}-¹⁵N NOEs have been measured at a magnetic field strength of 14.1 Tesla for 91 residues of free barnase and for 90 residues out of a total of 106 in the complex (excluding three prolines and the N-terminal residue) backbone amide ¹⁵N sites of barnase. The primary relaxation data for both the cases have been analyzed in the framework of the model-free formalism using both isotropic and axially symmetric models of the rotational diffusion tensor. As per the latter, the overall rotational correlation times (_m) are 5.0 and 9.5 ns for the free and complexed barnase, respectively. The average order parameter is found to be 0.80 for free barnase and 0.86 for the complex. However, the changes are not uniform along the backbone and for about 5 residues near the binding interface there is actually a significant decrease in the order parameters on complex formation. These residues are not involved in the actual binding. For the residues where the order parameter increases, the magnitudes vary significantly. It is observed that the complex has much less internal mobility, compared to free barnase. From the changes in the order parameters, the entropic contribution of NH bond vector motion to the free energy of complex formation has been calculated. It is apparent that these motions cause significant unfavorable contributions and therefore must be compensated by many other favorable contributions to effect tight complex formation. The observed variations in the motion and their different locations with regard to the binding interface may have important implications for remote effects and regulation of the enzyme action.     

Hydrogen exchange mass spectrometry reveals protein interfaces and distant dynamic coupling effects during the reversible self-association of an IgG1 monoclonal antibody

There is a need for new analytical approaches to better characterize the nature of the concentration-dependent, reversible self-association (RSA) of monoclonal antibodies (mAbs) directly, and with high resolution, when these proteins are formulated as highly concentrated solutions. In the work reported here, hydrogen exchange mass spectrometry (HX-MS) was used to define the concentration-dependent RSA interface, and to characterize the effects of association on the backbone dynamics of an IgG1 mAb (mAb-C). Dynamic light scattering, chemical cross-linking, and solution viscosity measurements were used to determine conditions that caused the RSA of mAb-C. A novel HX-MS experimental approach was then applied to directly monitor differences in local flexibility of mAb-C due to RSA at different protein concentrations in deuterated buffers. First, a stable formulation containing lyoprotectants that permitted freeze-drying of mAb-C at both 5 and 60 mg/mL was identified. Upon reconstitution with RSA-promoting deuterated solutions, the low vs. high protein concentration samples displayed different levels of solution viscosity (i.e., approx. 1 to 75 mPa.s). The reconstituted mAb-C samples were then analyzed by HX-MS. Two specific sequences covering complementarity-determining regions CDR2H and CDR2L (in the variable heavy and light chains, respectively) showed significant protection against deuterium uptake (i.e., decreased hydrogen exchange). These results define the major protein-protein interfaces associated with the concentration-dependent RSA of mAb-C. Surprisingly, certain peptide segments in the V_H domain, the constant domain (C_H2), and the hinge region (C_H1-C_H2 interface) concomitantly showed significant increases in local flexibility at high vs. low protein concentrations. These results indicate the presence of longer-range, distant dynamic coupling effects within mAb-C occurring upon RSA.     

Mechanism of formation of amyloid protofibrils of barstar from soluble oligomers: evidence for multiple steps and lateral association coupled to conformational conversion

Understanding the heterogeneity of the soluble oligomers and protofibrillar structures that form initially during the process of amyloid fibril formation is a critical aspect of elucidating the mechanism of amyloid fibril formation by proteins. The small protein barstar offers itself as a good model protein for understanding this aspect of amyloid fibril formation, because it forms a stable soluble oligomer, the A form, at low pH, which can transform into protofibrils. The mechanism of formation of protofibrils from soluble oligomer has been studied by multiple structural probes, including binding to the fluorescent dye thioflavin T, circular dichroism and dynamic light scattering, and at different temperatures and different protein concentrations. The kinetics of the increase in any probe signal are single exponential, and the rate measured depends on the structural probe used to monitor the reaction. Fastest is the rate of increase in the mean hydrodynamic radius, which grows from a value of 6 nm for the A form to 20 nm for the protofibril. Slower is the rate of increase in thioflavin T binding capacity, and slowest is the rate of increase in circular dichroism at 216 nm, which occurs at about the same rate as that of the increase in light scattering intensity. The dynamic light scattering measurements suggest that the A form transforms completely into larger size aggregates at an early stage during the aggregation process. It appears that structural changes within the aggregates occur at the late stages of assembly into protofibrils. For all probes, and at all temperatures, no initial lag phase in protofibril growth is observed for protein concentrations in the range of 1 microM to 50 microM. The absence of a lag phase in the increase of any probe signal suggests that aggregation of the A form to protofibrils is not nucleation dependent. In addition, the absence of a lag phase in the increase of light scattering intensity, which changes the slowest, suggests that protofibril formation occurs through more than one pathway. The rate of aggregation increases with increasing protein concentration, but saturates at high concentrations. An analysis of the dependence of the apparent rates of protofibril formation, determined by the four structural probes, indicates that the slowest step during protofibil formation is lateral association of linear aggregates. Conformational conversion occurs concurrently with lateral association, and does so in two steps leading to the creation of thioflavin T binding sites and then to an increase in beta-sheet structure. Overall, the study indicates that growth during protofibril formation occurs step-wise through progressively larger and larger aggregates, via multiple pathways, and finally through lateral association of critical aggregates.     

Effects of PKA phosphorylation of cardiac troponin I and strong crossbridge on conformational transitions of the N-domain of cardiac troponin C in regulated thin filaments

Regulation of cardiac muscle function is initiated by binding of Ca2+ to troponin C (cTnC) which induces a series of structural changes in cTnC and other thin filament proteins. These structural changes are further modulated by crossbridge formation and fine-tuned by phosphorylation of cTnI. The objective of the present study is to use a new F?rster resonance energy transfer-based structural marker to distinguish structural and kinetic effects of Ca2+ binding, crossbridge interaction, and protein kinase A phosphorylation of cTnI on the conformational changes of the cTnC N-domain. The FRET-based structural marker was generated by attaching AEDANS to one cysteine of a double-cysteine mutant cTnC(13C/51C) as a FRET donor and attaching DDPM to the other cysteine as the acceptor. The doubly labeled cTnC mutant was reconstituted into the thin filament by adding cTnI, cTnT, tropomyosin, and actin. Changes in the distance between Cys13 and Cys51 induced by Ca2+ binding/dissociation were determined by FRET-sensed Ca2+ titration and stopped-flow studies, and time-resolved fluorescence measurements. The results showed that the presence of both Ca2+ and strong binding of myosin head to actin was required to achieve a fully open structure of the cTnC N-domain in regulated thin filaments. Equilibrium and stopped-flow studies suggested that strongly bound myosin head significantly increased the Ca2+ sensitivity and changed the kinetics of the structural transition of the cTnC N-domain. PKA phosphorylation of cTnI impacted the Ca2+ sensitivity and kinetics of the structural transition of the cTnC N-domain but showed no global structural effect on cTnC opening. These results provide an insight into the modulation mechanism of strong crossbridge and cTnI phosphorylation in cardiac thin filament activation/relaxation processes.     

Production and partial characterization of two types of phytase from Aspergillus niger NCIM 563 under submerged fermentation conditions

Novel extracellular phytase was produced by Aspergillus niger NCIM 563 under submerged fermentation conditions at 30 °C in medium containing dextrin and glucose as carbon sources along with sodium nitrate as nitrogen source. Maximum phytase activity (41.47 IU/mL at pH 2.5 and 10.71 IU/mL at pH 4.0) was obtained when dextrin was used as carbon source along with glucose and sodium nitrate as nitrogen source. Nearly 13 times increase in phytase activity was observed when phosphate in the form of KH₂PO₄ (0.004 g/100 mL) was added in the fermentation medium. Physic-chemical properties of partially purified enzyme indicate the possibility of two distinct forms of phytases, Phy I and Phy II. Optimum pH and temperature for Phy I was 2.5 and 60 °C while Phy II was 4.0 and 60 °C, respectively. Phy I was stable in the pH range 1.5–3.5 while Phy II was stable in the wider pH range, 2.0–7.0. Molecular weight of Phy I and Phy II on Sephacryl S-200 was approximately 304 kDa and 183 kDa, respectively. Phy I activity was moderately stimulated in the presence of 1 mM Mg²⁺, Mn²⁺, Ca²⁺ and Fe³⁺ ions and inhibited by Zn²⁺ and Cd²⁺ ions while Phy II activity was moderately stimulated by Fe³⁺ ions and was inhibited by Hg²⁺, Mn²⁺ and Zn²⁺ ions at 1 mM concentration in reaction mixture. The Km for Phy I and II was 3.18 and 0.514 mM while Vmax was 331.16 and 59.47 μmols/min/mg protein, respectively.     

Heterologous expression, purification and characterization of heterodimeric monellin

Monellin is an intensely sweet-tasting protein present in the berry of Dioscoreophyllum cumminsii. Naturally occurring monellin (double chain monellin) is a heterodimer of two subunits commonly referred to as chain A and chain B. Monellin is a good model system for structural and dynamic studies of proteins. Single chain monellin has been generated by covalently linking the two subunits of naturally occurring double chain monellin, and has been used extensively for folding and unfolding studies, as well as for protein aggregation studies. There are, however, relatively few reports on such studies with double chain monellin. The primary difficulty associated with studies using double chain monellin appears to be the lack of a standard purification method. Here, a simple method for the purification of double chain monellin is presented. The genes encoding the two chains of monellin were cloned into a modified pETDUET vector under separate T7 promoters. The expression vector containing the genes of the two chains was expressed in E. coli BL21 Star (DE3). The expressed protein was purified using two steps of chromatography, ion exchange chromatography and gel filtration chromatography. This expression system consistently produced 40 mg of pure double chain monellin per litre of E. coli culture, in the correctly folded native state. The purity of the protein was confirmed by mass spectrometry and SDS-PAGE analysis. The purified protein was characterized using different spectroscopic methods, and the spectra obtained were in good agreement with the published spectra of naturally occurring double chain monellin.     

Protein dynamics control proton transfer from bulk solvent to protein interior: a case study with a green fluorescent protein

The kinetics of proton transfer in Green Fluorescent Protein (GFP) have been studied as a model system for characterizing the correlation between dynamics and function of proteins in general. The kinetics in EGFP (a variant of GFP) were monitored by using a laser-induced pH jump method. The pH was jumped from 8 to 5 by nanosecond flash photolysis of the "caged proton," o-nitrobenzaldehyde, and subsequent proton transfer was monitored by following the decrease in fluorescence intensity. The modulation of proton transfer kinetics by external perturbants such as viscosity, pH, and subdenaturing concentrations of GdnHCl as well as of salts was studied. The rate of proton transfer was inversely proportional to solvent viscosity, suggesting that the rate-limiting step is the transfer of protons through the protein matrix. The rate is accelerated at lower pH values, and measurements of the fluorescence properties of tryptophan 57 suggest that the enhancement in rate is associated with an enhancement in protein dynamics. The rate of proton transfer is nearly independent of temperature, unlike the rate of the reverse process. When the stability of the protein was either decreased or increased by the addition of co-solutes, including the salts KCl, KNO(3), and K(2)SO(4), a significant decrease in the rate of proton transfer was observed in all cases. The lack of correlation between the rate of proton transfer and the stability of the protein suggests that the structure is tuned to ensure maximum efficiency of the dynamics that control the proton transfer function of the protein.