A linkage map of diploid Avena based on RFLP loci and a locus conferring resistance to nine isolates of Puccinia coronata var. ‘avenae’

An F₂ oat population was produced by crossing the diploid (n=7) species Avena strigosa (CI 3815) with A. wiestii (CI 1994), resistant and susceptible, respectively, to 40 isolates of Puccinia coronata, the causal agent of crown rust. Eighty-eight F₂ individuals were used to construct an RFLP linkage map representing the A genome of cultivated hexaploid oat. Two hundred and eight RFLP loci have been placed into 10 linkage groups. This map covers 2416 cM, with an average of 12 cM between RFLP loci. Eighty-eight F₃ lines, derived from F₂ individuals used to construct the map, were screened for resistance to 9 isolates of P. coronata. One locus, Pca, was found to confer a dominant resistance phenotype to isolates 203, 258, 263, 264B, 290, 298, 325A, and 345. Pca also conferred resistance to isolate 276; however, an unlinked second gene may also be involved.Journal Paper No. 15143 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project No. 3134 and 2447     

Inhibition of Immune Complex-Induced Inflammation by A small Molecular Weight Selectin Antagonist

The anti-inflammatory effect of a small molecular weight antagonist of P- and E-selectin-dependent cell adhesion was examined. The glycolipid sulphatide was shown to block the adherence of thrombin-activated rat platelets to HL-60 cells. This interaction is known to be dependent on P-selectin. The rat dermal reverse passive Arthus reaction was used to assess the effect of sulphatide on a neutrophil dependent inflammatory response. Sulphatide dosedependently blocked both the vascular permeability increase and cell infiltration after intraperitoneal administration. These results show that a small molecular weight compound which blocks P- and E-selectin dependent adhesion in vitro can effectively block the inflammation due to immune complex deposition. A compound with this type of profile may have therapeutic potential in the treatment of immune complex mediated diseases.     

Cell-substrate adhesion and metastatic potential of cultured mesothelioma cells induced by asbestos

Cell-substrate adhesion was quantified for two cultured mesothelioma cell lines (epitheliomatus and sarcomatous) on glass, fibronectin and laminin substrates. Interference reflection microscopy (IRM) was used to image the adhesion patterns of cells and a grey level analysis was employed to quantify adhesion. Sarcomatous cells demonstrated marked adhesion to glass and fibronectin-coated substrates but not to laminin-coated substrate, with the greatest adhesion occurring on the fibronectin-coated surface. This adhesion was accompanied by cytoplasmic spreading. By contrast, epitheliomatous cells showed little tendency to adhere to any of the substrates and only showed significant spreading when in contact with the laminin substrate (P < 0.01). A bioassay was used to determine the metastatic potential of each of the cell lines. Via the intravenous route, the sarcomatous cells killed the host rats in 24.7 ± 1.5 (S.D.) days compared to 27.3 ± 0.9 (S.D.) days for the epitheliomatous cells (P < 0.01). After subcutaneous inoculation of tumour cells, the sarcomatous cells killed the host rats in 54.7 ± 0.7 (S.D.) days compared to 48.5 ± 0.5 (S.D.) days for the epitheliomatous cells (P < 0.01). We conclude that the results of the metastasis bioassays were consistent with the predicted behavior of these cell lines based on their ability to adhere to substrates in the in vitro adhesion assays.     

Development and validation of a high-performance liquid chromatographic method for the determination of methocarbamol in human plasma

An isocratic HPLC method was developed and validated for the quantitation of methocarbamol in human plasma. Methocarbamol and internal standard in 200 μl of human plasma were extracted with ethyl acetate, evaporated to dryness and reconstituted in water. Separation was achieved on a reversed-phase C₁₈ column with a mobile phase of methanol—0.1 M potassium phosphate monobasic—water (35:10:55, v/v/v). The detection was by ultraviolet at 272 nm. Linearity was established at 1–100 μg/ml (r > 0.999). The limit of quantitation was designed as 1 μg/ml to suit pharmacokinetic studies. Inter-day precision and accuracy of the calibration standards were 1.0 to 3.6% coefficients of variance (C.V.) and −2.0 to +1.6% relative error (R.E.). Quality controls of 3, 20 and 70 μg/ml showed inter-day precision and accuracy of 2.5 to 3.6% C.V. and −0.9 to −0.4% R.E. Recovery of methocarbamol was 91.4–100.3% in five different lots of plasma. The method was shown to be applicable on different brands of C₁₈ columns.     

A simple model of human foveal ganglion cell responses to hyperacuity stimuli

We developed a physiologically plausible model of the first steps of spatial visual information processing in the fovea of the human retina. With the predictions of this model we could support the hypothesis that, for moderate contrasts ( 40%), hyperacuity is mediated by the magnocellular (MC-) pathway. Despite the lower sampling density in the MC pathway, as compared to the parvocellular (PC-) pathway, the information that is transferred by the MC ganglion cells is sufficient to achieve thresholds comparable to those of human subjects in psychophysical tasks. This is a result of the much higher signal-to-noise ratio of the MC pathway cell signals. The PC pathway cells do not transfer enough information for hyperacuity thresholds.     

Production of cyclodextrins using moderately heat-treated cornstarch

Cyclodextrins are very useful compounds for the food, cosmetic, pharmaceutic, and plastic industries. We developed a process for the production of cyclodextrins from moderately heat-treated cornstarch. This method had many merits. First, the cyclodextrins were not degraded by cyclodextrin glucanotransferase, because low molecular weight maltodextrins were hardly produced. Second, it was possible to remove the residual cornstarch by a simple method such as filtration or centrifugation. Third, the amount of cyclodextrin glucanotransferase used for cyclodextrin production was less than that using the traditional method. Fourth, the pretreating method was simple. And fifth, the residual starch could be used as substrate for the production of other compounds. Cyclodextrins were produced at optimum conditions: heating temperature was 65°C; heating time was 1 h; concentration of substrate was 7.5%; amount of enzyme loaded was 48 U g⁻¹ of substrate. Using these conditions, the results were as follows: the content of cyclodextrins, 50%; the conversion yield of substrate, 25%; the productivity per enzyme unit, 5.22 mg of cyclodextrins.     

Cloning,characterization and overproduction of nuclease S1 gene (nucS) from Aspergillus oryzae

The nuclease S1 gene (nucS) from Aspergillus oryzae was isolated using a polymerase-chain-reaction-amplified DNA fragment as a probe, and a 2.6-kb SalI-EcoRI fragment containing the nucS gene was sequenced. It was deduced that the nucS gene had two short introns, 49 and 50 nucleotides in lenght. The nucS gene had an open-reading frame of 963 base pairs and coded for a protein of 287 amino acid residues, comprising the signal peptide of 20 amino acids and a mature protein of 267 amino acids. The deduced amino acid sequence agreed well with the published amino acid sequence except for one substitution. Southern hybridization analysis showed that the nucS gene existed as a single copy in the A. oryzae chromosome. When the structural gene of nucS was fused with the promoter of the glaA gene and introduced into A. oryzae, the yield od secreted nuclease S1 increased about 100-fold compared with the recipient strain.     

Methodology in the study of seabass (Lates calcarifer Bloch): nutritional requirements in Singapore

This paper describes the effort of the Marine Aquaculture Section of the Primary Production Department in Singapore and the Institut Francais de Recherche pour l'Exploitation de la Mer in developing adequate facilities for fish nutritional requirement studies in Singapore, and in introducing appropriate nutritional methodology so that results are reliable and accurate. One of the first achievements was the demonstration of homogeneous fish (tropical seabass, Lates calcarifer Bloch) growth response in a newly established tank system before any nutritional experiments were initiated. The application of statistical procedures that take into consideration the power of a test and number of replications required has allowed for more accurate interpretation of results. This can be seen in the results of the first nutritional requirement experiment on the optimal dietary protein level of the seabass at constant energy.     

Antitumor agents-CLXXV. Anti-tubulin action of (+)-thiocolchicine prepared by partial synthesis

(+)-Thiocolchicine (2b) was prepared from (±)-colchicine (1) in a five-step reaction sequence that included chromatographic separation of appropriate camphanylated diastereomers. Acid hydrolysis of the (+)-diastereomer, followed by acetylation, yielded the desired product 2b. (+)-Thiocolchicine has 15-fold lower inhibitory activity against tubulin polymerization than (−)-thiocolchicine, and is 29-fold less potent for inhibiting growth of human Burkitt lymphoma cells. The enantiomer 2a, prepared from the (−)-camphanylated diastereomer, had potent activity in all assays comparable to that of (−)-thiocolchicine prepared by other methods. These results support the hypothesis that the proper configuration of colchicine-related compounds is an important requirement for their anti-tubulin action.