The human polycomb group EED protein interacts with the integrase of human immunodeficiency virus type 1

Human EED, a member of the superfamily of WD-40 repeat proteins and of the Polycomb group proteins, has been identified as a cellular partner of the human immunodeficiency virus type 1 (HIV-1) matrix (MA) protein (R. Peytavi et al., J. Biol. Chem. 274:1635-1645, 1999). In the present study, EED was found to interact with HIV-1 integrase (IN) both in vitro and in vivo in yeast. In vitro, data from mutagenesis studies, pull-down assays, and phage biopanning suggested that EED-binding site(s) are located in the C-terminal domain of IN, between residues 212 and 264. In EED, two putative discrete IN-binding sites were mapped to its N-terminal moiety, at a distance from the MA-binding site, but EED-IN interaction also required the integrity of the EED last two WD repeats. EED showed an apparent positive effect on IN-mediated DNA integration reaction in vitro, in a dose-dependent manner. In situ analysis by immunoelectron microscopy (IEM) of cellular distribution of IN and EED in HIV-1-infected cells (HeLa CD4(+) cells or MT4 lymphoid cells) showed that IN and EED colocalized in the nucleus and near nuclear pores, with maximum colocalization events occurring at 6 h postinfection (p.i.). Triple colocalizations of IN, EED, and MA were also observed in the nucleoplasm of infected cells at 6 h p.i., suggesting the ocurrence of multiprotein complexes involving these three proteins at early steps of the HIV-1 virus life cycle. Such IEM patterns were not observed with a noninfectious, envelope deletion mutant of HIV-1.     

Stimulation of antimycobacterial activity in mouse peritoneal macrophages by priming with trehalose dimycolate (TDM).

We examined the potential of two bacterial immunomodulators, trehalose dimycolate (TDM) and lipopolysaccharide (LPS), to stimulate the capacity of mouse peritoneal macrophages to control the growth of the intracellular bacterium, Mycobacterium tuberculosis BCG. Macrophages were obtained from mice innately susceptible (Bcgs) or resistant (Bcgr) to BCG infection. In all mouse strains tested (Bcgr and Bcgs), with the exception of BALB/c (Bcgs), TDM was sufficient to elicit macrophages with strong antimycobacterial activity in vitro. In BALB/c mice, the induction of anti-BCG activity required two signals, TDM and LPS, given in sequence. Our data suggest that additional gene(s), besides the Bcg locus, control macrophage resistance to BCG.     

Reduced sperm counts in guppies (Poecilia reticulata) following exposure to low levels of tributyltin and bisphenol A.

There is increasing evidence that normal male reproductive function can be disrupted by exposure to pollutants in the environment that can exogenously mimic, antagonize or block sex-hormone function. One possible consequence of exposure to these xenobiotics is disruption to spermatogenesis, but results thus far provide only indirect and inconsistent evidence. In this study we exposed adult male guppies (Poeciliidae: Teleostei) to environmentally relevant levels of the common xenobiotics tributyltin (11.2-22.3 ngl-1) and bisphenol A (274-549 micrograms l-1) in experimental aquaria. After 21 days of exposure, we found significant declines (by 40-75%) in total sperm counts for male fishes exposed to tributyltin and bisphenol A compared with controls. This short-term decline in sperm count is unlikely to be the result of endocrine-mediated alteration of the germ line, and we found no change in testis size or sperm lengths between treatments. However, Sertoli cells, which facilitate the transport of maturing sperm into the testicular deferent duct (where they are stored prior to ejaculation), are directly sensitive to xenobiotic action and it is therefore possible that spermatogenesis was inhibited through in vivo interference with normal Sertoli-cell function.     

Biomechanical modeling of posterior instrumentation of the scoliotic spine

Scoliosis is a three-dimensional deformation of the spine that can be treated by vertebral fusion using surgical instrumentation. However, the optimal configuration of instrumentation remains controversial. Simulating the surgical maneuvers with personalized biomechanical models may provide an analytical tool to determine instrumentation configuration during the pre-operative planning. Finite element models used in surgical simulations display convergence difficulties as a result of discontinuities and stiffness differences between elements. A kinetic model using flexible mechanisms has been developed to address this problem, and this study presents its use in the simulation of Cotrel-Dubousset Horizon surgical maneuvers. The model of the spine is composed of rigid bodies corresponding to the thoracic and lumbar vertebrae, and flexible elements representing the intervertebral structures. The model was personalized to the geometry of three scoliotic patients (with a thoracic Cobb angle of 45 degrees, 49 degrees and 39 degrees ). Binary joints and kinematic constraints were used to represent the rod-implant-vertebra joints. The correction procedure was simulated using three steps: (1) Translation of hooks and screws on the first rod; (2) 90 degrees rod rotation; (3) Hooks and screws look-up on the rod. After the simulation, slight differences of 0-6 degrees were found for the thoracic spine scoliosis and the kyphosis, and of 1-8 degrees for the axial rotation of the apical vertebra and for the orientation of the plane of maximum deformity, compared to the real post-operative shape of the patient. Reaction loads at the vertebra-implant link were mostly below 1000 N, while reaction loads at the boundary conditions (representing the overall action of the surgeon) were in the range 7-470 N and maximum torque applied to the rod was 1.8 Nm. This kinetic modeling approach using flexible mechanisms provided a realistic representation of the surgical maneuvers. It may offer a tool to predict spinal geometry correction and assist in the pre-operative planning of surgical instrumentation of the scoliotic spine.     

Weed seed availability,carabid intraspecific interference and their interaction drive weed seed consumption by carabid beetles

1. Carabid beetles may play a role in the regulation of arable weeds, when seed predation is directly density‐dependent and consumption increases more than proportionally with seed density.
2. We quantified the effect of seed and carabid density on consumption by two carabid species (Poecilus cupreus and Harpalus affinis) of the weed species Taraxacum officinale and Viola arvensis. For each pairing of carabid and weed species, we quantified per capita seed mortality (PCSM) over 72 h under combinations of low and high densities of carabids and seeds, aiming to assess whether per capita consumption increased more or less than proportionally with seed density.
3. We tested three hypotheses: (i) PCSM is constant as seed availability increases; (ii) for a fixed seed density, PCSM decreases with increasing numbers of carabid conspecifics; and (iii) the response of PCSM changes with the interaction between seed and carabid density.
4. Without intraspecific competition, we detected a seed density‐independent predation effect, which became inverse density‐dependent over time. At similar seed densities, the presence of conspecific carabids did not affect PCSM, although it led to a faster shift towards inverse density dependence in T. officinale.
5. The findings of the present study suggest that a sufficiently large carabid numerical response might lead to direct predation density‐dependence.

     

New Antibiotic Molecules: Bypassing the Membrane Barrier of Gram Negative Bacteria Increases the Activity of Peptide Deformylase Inhibitors

Background

Multi-drug resistant (MDR) bacteria have become a major concern in hospitals worldwide and urgently require the development of new antibacterial molecules. Peptide deformylase is an intracellular target now well-recognized for the design of new antibiotics. The bacterial susceptibility to such a cytoplasmic target primarily depends on the capacity of the compound to reach and accumulate in the cytosol.

Methodology/Principal Findings

To determine the respective involvement of penetration (influx) and pumping out (efflux) mechanisms to peptide deformylase inhibitors (PDF-I) activity, the potency of various series was determined using various genetic contexts (efflux overproducers or efflux-deleted strains) and membrane permeabilizers. Depending on the structure of the tested molecules, two behaviors could be observed: (i) for actinonin the first PDF-I characterized, the AcrAB efflux system was the main parameter involved in the bacterial susceptibility, and (ii), for the lastest PDF-Is such as the derivatives of 2-(5-bromo-1H-indol-3-yl)-N-hydroxyacetamide, the penetration through the membrane was a important limiting step.

Conclusions/Significance

Our results clearly show that the bacterial membrane plays a key role in modulating the antibacterial activity of PDF-Is. The bacterial susceptibility for these new antibacterial molecules can be improved by two unrelated ways in MDR strains: by collapsing the Acr efflux activity or by increasing the uptake rate through the bacterial membrane. The efficiency of the second method is associated with the nature of the compound.     

Induction and growth properties of carrot roots with different complements of Agrobacterium rhizogenes T-DNA

Single and multiple infections of carrot discs were carried out with Agrobacterium strains harbouring different segments of pRi1855 TL-DNA cloned in the binary vector Bin 19 and with a strain carrying the TR-DNA from the same Ri plasmid. Roots induced by the various co-inoculations were cultured and their growth patterns were followed. Abundant roots could be induced by TL-DNA rol genes A, B and C as a single insert (rolA+B+C) and by rolB alone provided an extended segment beyond its 5 noncoding region was included in the construction. A depression of rooting capability was caused by the inclusion of rolC together with rolB (rolB+C). In all cases co-inoculation with the Agrobacterium carrying TR-DNA-borne auxin genes was necessary for root induction since none of the rol constructions was in itself capable of eliciting any response; an exceeding majority of these roots were however shown to contain rol genes but no TR-DNA. Rooting was also elicited if rol constructions were co-inoculated with a strain carrying TL-DNA genes 13 and 14 (ORF13+14) instead of the TR-DNA strain. These roots were shown to contain both rol genes and ORF13+14. Striking differences in growth properties were shown by roots containing different complements of TL-DNA genes. Typical hairy root traits, high growth rate, branching and, most noticeably, absence of geotropism, were shown by roots containing rolB alone, while roots with rolA+B+C were geotropic as normal carrot roots. Hairy root traits were conferred to rolA+B+C roots by the concomitant presence of ORF13+14 and by the addition of auxin to the culture medium. A model is presented which attempts to rationalize the growth patterns by assigning interplaying roles to the various TL-DNA genes involved.