Pharmacological comparison of rat and human melanocortin 3 and 4 receptors in vitro

The melanocortin 3 and 4 receptors are G-protein-coupled receptors found in the hypothalamus with important role in regulation of the energy balance. In this study, we performed pharmacological comparison of the rat and human melancortin (MC) 3 and MC4 receptors. We transiently expressed the genes for these receptors individually in a mammalian cell line and determined the binding affinities to several MSH peptides. The results showed no major difference between the rat and human MC3 receptors while the rat MC4 receptor had higher affinity to several peptides compared with the human MC4 receptor. NDP-, alpha-, beta-, gamma-MSH, ACTH(1-24), HS014 and MTII had from 5- to 34-fold higher affinity for the rat MC4 receptor, while SHU9119, HS024 and HS028 had similar affinity for both the MC4 receptors. Pharmacological species difference have earlier been reported for the MC1 and MC5 receptors but this is the first report showing important differences between the rat and human MC4 receptors.     

Oligosaccharide and sucrose complexes of amylosucrase. Structural implications for the polymerase activity

The glucosyltransferase amylosucrase is structurally quite similar to the hydrolase alpha-amylase. How this switch in functionality is achieved is an important and fundamental question. The inactive E328Q amylosucrase variant has been co-crystallized with maltoheptaose, and the structure was determined by x-ray crystallography to 2.2 A resolution, revealing a maltoheptaose binding site in the B'-domain somewhat distant from the active site. Additional soaking of these crystals with maltoheptaose resulted in replacement of Tris in the active site with maltoheptaose, allowing the mapping of the -1 to +5 binding subsites. Crystals of amylosucrase were soaked with sucrose at different concentrations. The structures at approximately 2.1 A resolution revealed three new binding sites of different affinity. The highest affinity binding site is close to the active site but is not in the previously identified substrate access channel. Allosteric regulation seems necessary to facilitate access from this binding site. The structures show the pivotal role of the B'-domain in the transferase reaction. Based on these observations, an extension of the hydrolase reaction mechanism valid for this enzyme can be proposed. In this mechanism, the glycogen-like polymer is bound in the widest access channel to the active site. The polymer binding introduces structural changes that allow sucrose to migrate from its binding site into the active site and displace the polymer.     

Lengthening the nose with a tongue-and-groove technique

Lengthening the short nose is often a major task. The ability to maintain proper alignment between the nasal base and dorsum may prove difficult without sacrificing the suppleness of the former. In this article, the authors introduce a technique of nose lengthening that ensures alignment of the tip with the rest of the nose yet avoids tip rigidity, unless a significant increase in tip projection is also planned. Two spreader grafts are placed, one on either side of the septum, and are extended beyond the caudal septal angle proportional to the planned nasal lengthening. A columella strut, with the cephalocaudal dimension equaling the combination of the width of the existing medial crura plus the amount of planned nasal lengthening, is placed between the medial crura in continuity with the caudal septum and is fixed to the medial crura using 5-0 clear nylon or polydioxanone suture. If additional projection beyond what is achievable by mere placement of a columella strut is required, the strut is fixed to the spreader grafts in a more projected position. Otherwise, the columella strut is simply positioned between the extensions of the spreader grafts. It is necessary to mobilize the lower lateral cartilages to prevent excessive columella show. This procedure has been performed on 23 patients over the past 12.5 years, with 20 patients enjoying good-to-excellent results. The advantages of this technique include its predictability and reproducibility, and the ability to elongate the nose with a mobile nasal base that is in line with the rest of the nose. If suture fixation is used to gain more projection, the technique proves dependable but the nose will become more rigid than is optimal. The requirement of three pieces of properly shaped septal cartilage, which might not be available when a secondary rhinoplasty is performed, is the major disadvantage of this operation. Furthermore, the procedure is, to some degree, labor-intensive.     

Inhibition of LDL oxidation by flavonoids in relation to their structure and calculated enthalpy

Twenty flavonoid compounds of five different subclasses were selected, and the relationship of their structure to the inhibition of low-density lipoprotein (LDL) oxidation in vitro was investigated. The most effective inhibitors, by either copper ion or 2,2'-azobis (2-amidino-propane) dihydrochloride (AAPH) induction, were flavonols and/or flavonoids with two adjacent hydroxyl groups at ring B. In the presence of the later catechol group, the contribution of the double bond and the carbonyl group at ring C was negligible. Isoflavonoids were more effective inhibitors than other flavonoid subclasses with similar structure. Substituting ring B with hydroxyl group(s) at 2' position resulted in a significantly higher inhibitory effect than by substituting ring A or ring B at other positions. The type of LDL inducer had no effect in flavonoids with catechol structure. Calculated heat of formation data (deltadeltaH(f)) revealed that the donation of a hydrogen atom from position 3 was the most likely result, followed by that of a hydroxyl from ring B. Position 3 was favored only in the presence of conjugated double bonds between ring A to ring B. This study makes it possible to assign the contribution of different functional groups among the flavonoid subclasses to in vitro inhibition of LDL oxidation.     

Syntheses and physical characterization of new aliphatic triblock poly(L-lactide-b-butylene succinate-b-L-lactide)s bearing soft and hard biodegradable building blocks

This study presents chemical syntheses and physical characterization of a new aliphatic poly(L-lactide-b-butylene succinate-b-L-lactide) triblock copolyester with soft and hard biodegradable building blocks. First, poly(butylene succinate) (PBS) prepolymers terminated with hydroxyl functional groups were synthesized through melt polycondensation from succinic acid and 1,4-butanediol. Further, a series of new PLLA-b-PBS-b-PLLA triblock copolyesters bearing various average PLLA block lengths were prepared via ring opening polymerization of L-lactide with the synthesized hydroxyl capped PBS prepolymer (Mn = 4.9 KDa) and stannous octanoate as the macroinitiator and catalyst, respectively. By means of GPC, NMR, FTIR, DSC, TGA, and wide-angle X-ray diffractometer (WAXD), the macromolecular structures and physical properties were intensively studied for these synthesized PBS prepolymer and PLLA-b-PBS-b-PLLA triblock copolyesters. 13C NMR and GPC experimental results confirmed the formation of sequential block structures without any detectable transesterification under the present experimental conditions, and the molecular weights of triblock copolyesters could be readily regulated by adjusting the feeding molar ratio of L-lactide monomer to the PBS macroinitiator. DSC measurements showed all single glass transitions, and their glass transition temperatures were found to be between those of PLLA and PBS, depending on the lengths of PLLA blocks. It was noteworthy that the segmental flexibilities of the hard PLLA blocks were found to be remarkably enhanced by the more flexible PBS block partner, and the PBS and PLLA building blocks were well mixed in the amorphous regions. Results of TGA analyses indicated that thermal degradation and stabilities of the PLLA blocks strongly depended on the average PLLA block lengths of triblock copolyesters. In addition, FTIR and WAXD results showed the coexistence of the assembled PLLA and PBS crystal structures when the average PLLA block length became larger than 7.8. These results may be beneficial for this new biodegradable aliphatic triblock copolyester to be applied as a potential biomaterial.     

Adhesion of high and low virulence Flavobacterium psychrophilum strains to isolated gill arches of rainbow trout Oncorhynchus mykiss

The ability of Flavobacterium psychrophilum to adhere to the gill tissue of rainbow trout Oncorhynchus mykiss was evaluated. A gill perfusion model was adopted, offering a number of advantages compared to other in vitro as well as in vivo models. A comparison between the adhesion capacity of a high and low virulence F. psychrophilum strain was made. Experiments were additionally carried out to assess the influence of water quality (organic material, nitrite) and temperature on the adhesion process of the bacterial cells. The high virulence strain attached more readily to the gill tissue than did the low virulence strain. Moreover, the adherence of the high virulence strain of F. psychrophilum was influenced by a number of factors. These were immersion of the gill arches in water to which organic material or nitrite were added, and elevated temperature. The former 2 increased the adhesion ability, while the latter had a negative influence on the adherence process.     

Molecular analysis of 16 Turkish families with DHPR deficiency using denaturing gradient gel electrophoresis (DGGE)

Dihydropteridine reductase (DHPR) catalyses the conversion of quinonoid dihydrobiopterin (qBH2) to tetrahydrobiopterin (BH4), which serves as the obligatory cofactor for the aromatic amino acid hydroxylases. DHPR deficiency, caused by mutations in the QDPR gene, results in hyperphenylalaninemia and deficiency of various neurotransmitters in the central nervous system, with severe neurological symptoms as a consequence. We have studied, at the clinical and molecular levels, 17 patients belonging to 16 Turkish families with DHPR deficiency. The patients were detected at neonatal screening for hyperphenylalaninemia or upon the development of neurological symptoms. To identify the disease causing molecular defects, we developed a sensitive screening method that rapidly scans the entire open reading frame and all splice sites of the QDPR gene. This method combines PCR amplification and "GC-clamping" of each of the seven exonic regions of QDPR, resolution of mutations by denaturing gradient gel electrophoresis (DGGE), and identification of mutations by direct sequence analysis. A total of ten different mutations were identified, of which three are known (G23D, Y150C, R221X) and the remaining are novel (G17R, G18D, W35fs, Q66R, W90X, S97fs and G149R). Six of these mutations are missense variants, two are nonsense mutations, and two are frameshift mutations. All patients had homoallelic genotypes, which allowed the establishment of genotype-phenotype associations. Our findings suggest that DGGE is a fast and efficient method for detection of mutations in the QDPR gene, which may be useful for confirmatory DNA-based diagnosis, genetic counselling and prenatal diagnosis in DHPR deficiency.