Pcal_0768, a hyperactive 4-α-glucanotransferase from <Emphasis Type="Italic">Pyrobacculum calidifontis</Emphasis>

Genome sequence of hyperthermophilic archaeon Pyrobaculum calidifontis revealed the presence of an open reading frame, Pcal_0768, corresponding to a putative 4-α-glucanotranferase belonging to glycoside hydrolases (GH) family 77. We have produced, in Escherichia coli, and purified recombinant Pcal_0768 which exhibited high disproportionation (690 U mg^?1) activity. To the best of our knowledge, this is the highest ever reported activity for any member of family GH77. Maltooligosaccharides, when used as sole substrates, were disproportionated into linear maltooligohomologues. The analysis of the reaction end products revealed no evidence for the production of cycloamyloses. Catalytic activity of the enzyme remained unchanged in the presence or the absence of ionic and nonionic detergents. γ-cyclodextrin, an inhibitor of 4-α-glucanotransferases, did not show any inhibitory effect on Pcal_0768 activity. These properties make Pcal_0768 a potential candidate for starch processing industry.     

The use of a proteinaceous “cushion” with a polystyrene‐binding peptide tag to control the orientation and function of a target peptide adsorbed to a hydrophilic polystyrene surface

In immobilizing target biomolecules on a solid surface, it is essential (i) to orient the target moiety in a preferred direction and (ii) to avoid unwanted interactions of the target moiety including with the solid surface. The preferred orientation of the target moiety can be achieved by genetic conjugation of an affinity peptide tag specific to the immobilization surface. Herein, we report on a strategy for reducing the extent of direct interaction between the target moiety and surface in the immobilization of hexahistidine peptide (6His) and green fluorescent protein (GFP) on a hydrophilic polystyrene (PS) surface: Ribonuclease HII from Thermococcus kodakaraensis (cHII) was genetically inserted as a “cushion” between the PS‐affinity peptide tag and target moiety. The insertion of a cushion protein resulted in a considerably stronger immobilization of target biomolecules compared to conjugation with only a PS affinity peptide tag, resulting in a substantially enhanced accessibility of the detection antibody to the target 6His peptide. The fluorescent intensity of the GFP moiety was decreased by approximately 30% as the result of fusion with cHII and the PS‐affinity peptide tag but was fully retained in the immobilization on the PS surface irrespective of the increased binding force. Furthermore, the fusion of cHII did not impair the stability of the target GFP moiety. Accordingly, the use of a proteinaceous cushion appears to be promising for the immobilization of functional biomolecules on a solid surface. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:527–534, 2016     

Efficient association of in vitro translation products with purified stable Candida tropicalis peroxisomes.

Newly synthesized peroxisomal proteins enter preexisting peroxisomes posttranslationally in vivo, generally without proteolytic processing. An efficient reconstitution of this process in vitro together with cloned DNAs for peroxisomal proteins would make possible investigation of the molecular information that targets proteins to peroxisomes. We have previously reported the isolation of clones for Candida tropicalis peroxisomal proteins; here we describe the association (and possible import) of peroxisomal proteins with peroxisomes in vitro. C. tropicalis was grown in a medium containing Brij 35, resulting in the induction of a moderate number of medium-sized peroxisomes. These peroxisomes, isolated in a sucrose gradient, had a catalase latency of 54% and were sufficiently stable to be concentrated and used in an import assay. The reticulocyte lysate translation products of total RNA from oleate-grown cells were incubated with the peroxisomes at 26 degrees C in the presence of 50 mM KCl, protease inhibitors, 0.5 M sucrose, 2.5 mM MOPS (morpholinepropanesulfonic acid) (pH 7.2), and 0.5 mM EDTA. Ten major translation products (which could be immunoprecipitated with antiserum against peroxisomal protein) became progressively associated with the peroxisomes during the first 30 min of incubation (some up to approximately 70%). These include acyl coenzyme A oxidase and the trifunctional protein hydratase-dehydrogenase-epimerase. This association did not occur at 4 degrees C nor did it occur if the peroxisomes were replaced with mitochondria.     

Nucleotide sequence of the neopullulanase gene from Bacillus stearothermophilus

The gene (nplT) for a new type of pullulan-hydrolysing enzyme, neopullulanase, from Bacillus stearothermophilus TRS40 was sequenced. The DNA sequence revealed only one large open reading frame, composed of 1764 bases and 588 amino acid residues (Mr 69144). Although the thermostable neopullulanase contained eight cysteine residues, they did not provide conformational stability by disulphide bonds. A comparison was made of the amino acid sequences of alpha-amylase, neopullulanase, isoamylase, pullulanase and cyclodextrin glucanotransferase. All the enzymes examined contained four highly conserved regions which probably constitute the active centres of the enzymes. The amino acid residues required for the specificity of neopullulanase are compared with those of alpha-amylase and other amylolytic enzymes.     

Protein secretion in Bacillus subtilis as influenced by the combination of signal sequence and the following mature portion

Abstract We have constructed secretion vector plasmids that have the signal sequence of the Bacillus licheniformis penicillinase gene ( penP ) or the Bacillus stearothermophilus α-amylase gene ( amyT ). We have also constructed penP, amyT and hsa (human salivary α-amylase gene) cartridges. Each of these cartridges was cloned on secretion vectors in Bacillus subtilis , and enzyme production was examined. When amyT vector was used, nearly the same efficiency of enzyme secretion was observed for amyT and penP cartridges. When penP vector was used, enzyme secretion for amyT decreased to about 3% of that for penP cartridges. The eukaryotic gene hsa was hardly expressed in any secretion vectors in B. subtilis .     

Nucleotide sequence of the Bacillus stearothermophilus alpha-amylase gene.

The nucleotide sequence of the Bacillus stearothermophilus alpha-amylase gene and its flanking regions was determined. An open reading frame was found, comprising a total of 1,647 base pairs (549 amino acids) and starting from a GUG codon as methionine. It was shown by NH2-terminal amino acid sequence analysis that the extracellular amylase consisted of 515 amino acid residues, which corresponded to a molecular weight of 58,779. Thus the NH2-terminal portion of the gene encodes 34 amino acid residues as a signal peptide. The amino acid sequence deduced from the alpha-amylase gene was fairly homologous (61%) with that of another thermostable amylase from Bacillus amyloliquefaciens.     

Development of an arming yeast strain for efficient utilization of starch by co-display of sequential amylolytic enzymes on the cell surface

The construction of a whole-cell biocatalyst with its sequential reaction has been performed by the genetic immobilization of two amylolytic enzymes on the yeast cell surface. A recombinant strain of Saccharomyces cerevisiae that displays glucoamylase and α-amylase on its cell surface was constructed and its starch-utilizing ability was evaluated. The gene encoding Rhizopus oryzae glucoamylase, with its own secretion signal peptide, and a truncated fragment of the α-amylase gene from Bacillus stearothermophilus with the prepro secretion signal sequence of the yeast α factor, respectively, were fused with the gene encoding the C-terminal half of the yeast α-agglutinin. The constructed fusion genes were introduced into the different loci of chromosomes of S. cerevisiae and expressed under the control of the glyceraldehyde-3-phosphate dehydrogenase promoter. The glucoamylase and α-amylase activities were not detected in the culture medium, but in the cell pellet fraction. The transformant strain co-displaying glucoamylase and α-amylase could grow faster on starch as the sole carbon source than the transformant strain displaying only glucoamylase. Received: 16 June 1998 / Received last revision: 21 August 1998 / Accepted: 3 September 1998     

mRNA secondary structure in an open reading frame reduces translation efficiency in Bacillus subtilis.

The structural gene for thermostable neutral protease, nprM, has only one stacking region, whose energy is -16.3 kcal/mol (-68.2 kJ/mol). Mutations for increasing (-30.8 kcal/mol [128.9 kJ/mol] and decreasing (-5.0 kcal/mol [-20.9 kJ/mol]) the energy of the stacking region were introduced in nprM on the recombinant plasmid pMK1 by using site-directed mutagenesis without any amino acid substitutions. The resultant plasmids were designated pMK2 and pMK3, respectively. The enzyme productivity of the pMK2 carrier was about 40% lower than that of pMK1, whereas the productivity of the pMK3 carrier was about 5% higher. The higher the stability of the stacking regions, the lower the enzyme productivity that was observed. mRNA concentrations were almost the same in the cells harboring these three plasmids. These results indicate that the secondary structure of mRNA reduces the translation efficiency.     

Biophysical effect of amino acids on the prevention of protein aggregation

Each protein folds into a unique and native structure spontaneously. However, during the unfolding or refolding process, a protein often tends to form aggregates. To establish a method to prevent undesirable protein aggregation and to increase the stability of native protein structures under deterioration conditions, two types of aggregation conditions, thermal unfolding-induced aggregation and dilution-induced aggregation from denatured state, were studied in the presence of additional amino acids and ions using lysozyme as a model protein. Among 15 amino acids tested, arginine exhibited the best results in preventing the formation of aggregates in both cases. Further biophysical studies revealed that arginine did not change the thermal denaturation temperature (T(m)) of the lysozyme. The preventive effect of arginine on aggregation was not dependent on the size or isoelectric point of eight kinds of proteins tested.     

New type of pullulanase from Bacillus stearothermophilus and molecular cloning and expression of the gene in Bacillus subtilis.

A new type of pullulanase which mainly produced panose from pullulan was found in Bacillus stearothermophilus and purified. The enzyme can hydrolyze pullulan efficiently and only hydrolyzes a small amount of starch. When pullulan was used as a substrate, the main product was panose and small amounts of glucose and maltose were simultaneously produced. By using pTB522 as a vector plasmid, the enzyme gene was cloned and expressed in Bacillus subtilis. Since the enzyme from the recombinant plasmid carrier could convert pullulan into not only panose but also glucose and maltose, we concluded that these reactions were due to the single enzyme. The new pullulanase, with a molecular weight of 62,000, was fairly thermostable. The optimum temperature was 60 to 65 degrees C, and about 90% of the enzyme activity was retained even after treatment at 60 degrees C for 60 min. The optimum pH for the enzyme was 6.0.