Vitamin D and maternal and child health: Overview and implications for dietary requirements

The essentiality of vitamin D for normal growth and development has been recognized for over 80 years, and vitamin D fortification programs have been in place in the United States for more than 70 years. Despite the above, vitamin D deficiency continues to be a common finding in certain population groups. Vitamin D deficiency has been suggested as a potential risk factor for the development of preeclampsia, and vitamin D deficiency during infancy and early childhood is associated with an increased risk for numerous skeletal disorders, as well as immunological and vascular abnormalities. Vitamin D deficiency can occur through multiple mechanisms including the consumption of diets low in this vitamin and inadequate exposure to environmental ultraviolet B rays. The potential value of vitamin D supplementation in high‐risk pregnancies and during infancy and early childhood is discussed. Currently, there is vigorous debate concerning what constitutes appropriate vitamin D intakes during early development as exemplified by differing recommendations from the Institute of Medicine Dietary Reference Intake report and recent recommendations by the Endocrine Society. As is discussed, a major issue that needs to be resolved is what key biological endpoint should be used when making vitamin D recommendations for the pregnant woman and her offspring. Birth Defects Research (Part C) 99:24–44, 2013. © 2013 Wiley Periodicals, Inc.     

Mitochondrial haplotypes may modulate the phenotypic manifestation of the LHON-associated m.14484T>C (MT-ND6) mutation in Chinese families

Mitochondrial m.14484T>C (MT-ND6) mutation has been associated with Leber's hereditary optic neuropathy. Previous investigations revealed that the m.14484T>C mutation is a primary factor underlying the development of optic neuropathy but is not sufficient to produce a clinical phenotype. However, mitochondrial haplogroups have been proposed to modulate the phenotypic manifestation of the m.14484T>C mutation. Here, we performed the clinical, genetic evaluation and complete mitochondrial genome sequence analysis of 41 Han Chinese pedigrees carrying the m.14484T>C mutation. These families exhibited a wide range of penetrances and expressivities of optic neuropathy. The average ratio between affected male/female matrilineal relatives from 41 families was 2:1. The penetrance of optic neuropathy in these Chinese pedigrees ranged from 5.6% to 100%, with the average of 23.8%. Furthermore, the age-of-onset for optic neuropathy varied from 4 to 44 years, with the average of 19.3 years. Sequence analysis of their mitochondrial genomes identified distinct sets of polymorphisms belonging to ten Eastern Asian haplogroups, indicating that the m.14484T>C mutation occurred through recurrent origins and founder events. We showed that mitochondrial haplogroups M9, M10 and N9 increased the penetrance of optic neuropathy in these Chinese families. In particular, these mitochondrial haplogroup specific variants: m.3394T>C (MT-ND1), m.14502T>C (MT-ND4) and m.14693A>G (MT-TE) enhanced the penetrance of visual loss in these Chinese families. These data provided the direct evidence that mitochondrial modifiers modulate the variable penetrance and expressivity of optic neuropathy among Chinese pedigrees carrying the m.14484T>C mutation.     

Formation of the death domain complex between FADD and RIP1 proteins in vitro

Fas-associated death domain (FADD) protein is an adapter molecule that bridges the interactions between membrane death receptors and initiator caspases. The death receptors contain an intracellular death domain (DD) which is essential to the transduction of the apoptotic signal. The kinase receptor-interacting protein 1 (RIP1) is crucial to programmed necrosis. The cell type interplay between FADD and RIP1, which mediates both necrosis and NF-κB activation, has been evaluated in other studies, but the mechanism of the interaction of the FADD and RIP1 proteins remain poorly understood. Here, we provided evidence indicating that the DD of human FADD binds to the DD of RIP1 in vitro. We developed a molecular docking model using homology modeling based on the structures of FADD and RIP1. In addition, we found that two structure-based mutants (G109A and R114A) of the FADD DD were able to bind to the RIP1 DD, and two mutations (Q169A and N171A) of FADD DD and four mutations (G595, K596, E620, and D622) of RIP1 DD disrupted the FADD–RIP1 interaction. Six mutations (Q169A, N171A, G595, K596, E620, and D622) lowered the stability of the FADD–RIP1 complex and induced aggregation that structurally destabilized the complex, thus disrupting the interaction.     

Biochemical characterization of cultivated Cordyceps bassiana mycelia and fruiting bodies by 1H nuclear magnetic resonance spectroscopy

In this study, nuclear magnetic resonance techniques coupled with multivariate data analysis were used for the metabolic profiling of mycelia and fruiting bodies of the entomopathogenic fungi, Cordyceps bassiana according to developmental stages. A direct extraction method using two deuterated solvents of D₂O and CDCl₃ was used to investigate the relative levels of identified metabolites in each extraction condition in the mycelium and fruiting body formation stages. There was a clear separation among mycelia and fruiting bodies with various developmental stages in partial least-squares discriminant analysis (PLS-DA) derived score plots. During the transition from mycelia to fruiting bodies, the major metabolic change observed was the conversion of glucose to mannitol, and beauvericin to phenylalanine and 1-hydroxyisovaleric acid. In the developmental stages of fruiting bodies studied, there was a clear separation between stage 3 and the other stages in PLS-DA derived score plots. Nineteen compounds including 13 amino acids, 2 nucleosides, 3 organic acids, and glucose showed the highest levels in stage 3 fruiting bodies. The flavonoid content in the fruiting bodies showed similar levels during stages 1, 2, and 3, whereas the level at stage 4 was significantly decreased compared to the other stages. Results suggest that the fruiting body of C. bassiana is richer in natural resources at stage 3 compared to the other fruiting body stages due to its high abundance of compounds including total flavonoids. The metabolome information acquired in this study can be useful criteria for the quality control of commercial use of C. bassiana.     

Mechanobiological dysregulation of the epidermis and dermis in skin disorders and in degeneration

During growth and development, the skin expands to cover the growing skeleton and soft tissues by constantly responding to the intrinsic forces of underlying skeletal growth as well as to the extrinsic mechanical forces from body movements and external supports. Mechanical forces can be perceived by two types of skin receptors: (1) cellular mechanoreceptors/mechanosensors, such as the cytoskeleton, cell adhesion molecules and mechanosensitive (MS) ion channels, and (2) sensory nerve fibres that produce the somatic sensation of mechanical force. Skin disorders in which there is an abnormality of collagen [e.g. Ehlers–Danlos syndrome (EDS)] or elastic (e.g. cutis laxa) fibres or a malfunction of cutaneous nerve fibres (e.g. neurofibroma, leprosy and diabetes mellitus) are also characterized to some extent by deficiencies in mechanobiological processes. Recent studies have shown that mechanotransduction is crucial for skin development, especially hemidesmosome maturation, which implies that the pathogenesis of skin disorders such as bullous pemphigoid is related to skin mechanobiology. Similarly, autoimmune diseases, including scleroderma and mixed connective tissue disease, and pathological scarring in the form of keloids and hypertrophic scars would seem to be clearly associated with the mechanobiological dysfunction of the skin. Finally, skin ageing can also be considered as a degenerative process associated with mechanobiological dysfunction. Clinically, a therapeutic strategy involving mechanoreceptors or MS nociceptor inhibition or acceleration together with a reduction or augmentation in the relevant mechanical forces is likely to be successful. The development of novel approaches such as these will allow the treatment of a broad range of cutaneous diseases.     

Telocytes express PDGFRα in the human gastrointestinal tract

Telocytes (TC), a cell population located in the connective tissue of many organs of humans and laboratory mammals, are characterized by a small cell body and extremely long and thin processes. Different TC subpopulations share unique ultrastructural features, but express different markers. In the gastrointestinal (GI) tract, cells with features of TC were seen to be CD34‐positive/c‐kit‐negative and several roles have been proposed for them. Other interstitial cell types with regulatory roles described in the gut are the c‐kit‐positive/CD34‐negative/platelet‐derived growth factor receptor α (PDGFRα)‐negative interstitial cells of Cajal (ICC) and the PDGFRα‐positive/c‐kit‐negative fibroblast‐like cells (FLC). As TC display the same features and locations of the PDGFRα‐positive cells, we investigated whether TC and PDGFRα‐positive cells could be the same cell type. PDGFRα/CD34, PDGFRα/c‐kit and CD34/c‐kit double immunolabelling was performed in full‐thickness specimens from human oesophagus, stomach and small and large intestines. All TC in the mucosa, submucosa and muscle coat were PDGFRα/CD34‐positive. TC formed a three‐dimensional network in the submucosa and in the interstitium between muscle layers, and an almost continuous layer at the submucosal borders of muscularis mucosae and circular muscle layer. Moreover, TC encircled muscle bundles, nerve structures, blood vessels, funds of gastric glands and intestinal crypts. Some TC were located within the muscle bundles, displaying the same location of ICC and running intermingled with them. ICC were c‐kit‐positive and CD34/PDGFRα‐negative. In conclusion, in the human GI tract the TC are PDGFRα‐positive and, therefore, might correspond to the FLC. We also hypothesize that in human gut, there are different TC subpopulations probably playing region‐specific roles.     

Tunable Nanoporous Network Polymer Nanocomposites having Size‐Selective Ion Transfer for Dye‐Sensitized Solar Cells

Nanoporous network polymer nanocomposites with tunable pore size for size‐dependent selective ion transport are successfully prepared via the surface‐induced cross‐linking polymerization of methyl methacrylate (MMA) and 1,6‐hexanediol diacrylate (HDDA) on the surfaces of nanocrystalline TiO₂ particles. The morphologies of the porous network polymer layer and nanopores were investigated by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE‐SEM), and Brunauer–Emmett–Teller (BET) experiments. The porous layer size‐selectively screened the ions that contacted the nanocrystalline TiO₂ particles, as demonstrated by ion conductivity measurements, electrochemical impedance spectroscopy (EIS), and transient absorption spectroscopy (TAS).     

Efficient,Cyanine Dye Based Bilayer Solar Cells

Simple bilayer solar cells, using commercially available cationic cyanine dyes as donors and evaporated C₆₀ layer as an acceptor are prepared. Cyanine dyes with absorption maxima of 578, 615 and 697 nm having either perchlorate or hexafluorophosphate counter‐ions are evaluated. The perchlorate dye leads to cells with S‐shape current‐voltage curves; only the dyes with the hexafluorophosphate counter‐ions lead to efficient solar cells. When the wide bandgap dyes are employed, S‐shape current‐voltage curves are obtained when the conductive polymer PEDOT:PSS is used as hole transport layer. Substitution of PEDOT:PSS with MoO₃ leads to cells with more rectangular current–voltage curves and high fill factors. Additionally, the cells using the MoO₃ layer for hole extraction lead to high open circuit voltages of 0.9 V. In the case that a low bandgap hexafluorophosphate dye is used with the HOMO above that of the PEDOT:PSS the cell performance is independent on the type of hole transport layer employed. Using this approach, bilayer solar cells are obtained with power efficiencies ranging from 1.8 to 2.9% depending on the particular dye employed. These are impressive numbers for bilayer solar cell that are partially solution processed in ambient conditions.