1,3-Dipolar cycloaddition to the FeSC fragment 20. Preparation and properties of carbonyliron complexes of di-thiooxamide. Reactivity of the mononuclear (di-thiooxamide)Fe(CO)3 towards dimethyl acetylenedicarboxylate

Reaction of Fe₂(CO)₉ at room temperature in THF with the di-thiooxamides (L), SC{N(R,R′)}C{(R,R′)N}S [R=Me, R′-R′=(CH₂)₂ (a); R=H, R′=ⁱPr (b); R=H, R′=iPr (c), R=H, R′=benzyl (d); R=H, R′=H (e)], results for ligands a-d initially in the formation of the mononuclear σ-S, σ-S′ chelate complexes Fe(CO)₃(L) (7a-d), which could be isolated in case of 7a and 7d. Under the reaction conditions, complexes 7a-d react further with [Fe(CO)₄] fragments to give three types of Fe₂(CO)₆(L) complexes (8a-d) in high yields, depending on the di-thiooxamide ligand used together with traces of the known complex S₂Fe₃(CO)₉ (14). The molecular structures of these complexes have been established by the single crystal X-ray diffraction determinations of 8a, 8b and 8d. In the reaction with ligand e the corresponding complex 7e was not detected and the well-known complexes 14 and S₂Fe₃(CO)₉ (15) were isolated in low yield. In situ prepared 7a reacts in a slow reaction with 1 equiv. of dimethyl acetylene dicarboxylate in a 1,3-dipolar cycloaddition reaction to give the stable initial ferra [2.2.1] bicyclic complex 10a in 60% yield. In complex 10a an additional Fe(CO)₄ fragment is coordinated to the sulfido sulfur atom of the cycloadded FeSC fragment. When a toluene solution of 10a is heated to 50 °C it loses two terminal CO ligands to give the binuclear FeFe bonded complex 11a in almost quantitative yield. The molecular structures of 10a and 11a have been confirmed by single crystal X-ray diffraction. Reaction of 7d at room temperature with 2 equiv. of dimethyl acetylene dicarboxylate results in the mononuclear complex 12d in 5% yield. The molecular structure of 12b has been established by single crystal X-ray diffraction and comprises a tetra dentate ligand with two ferra-sulpha cyclobutene, and a ferra-disulpha cyclopentene moiety. When the reaction is performed at 60 °C a low yield of 2,3,4,5-thiophene tetramethyl tertracarboxylate is obtained besides complex 12d.     

Multiple duplications of yeast hexose transport genes in response to selection in a glucose-limited environment

When microbes evolve in a continuous, nutrient-limited environment, natural selection can be predicted to favor genetic changes that give cells greater access to limiting substrate. We analyzed a population of baker's yeast that underwent 450 generations of glucose-limited growth. Relative to the strain used as the inoculum, the predominant cell type at the end of this experiment sustains growth at significantly lower steady-state glucose concentrations and demonstrates markedly enhanced cell yield per mole glucose, significantly enhanced high-affinity glucose transport, and greater relative fitness in pairwise competition. These changes are correlated with increased levels of mRNA hybridizing to probe generated from the hexose transport locus HXT6. Further analysis of the evolved strain reveals the existence of multiple tandem duplications involving two highly similar, high- affinity hexose transport loci, HXT6 and HXT7. Selection appears to have favored changes that result in the formation of more than three chimeric genes derived from the upstream promoter of the HXT7 gene and the coding sequence of HXT6. We propose a genetic mechanism to account for these changes and speculate as to their adaptive significance in the context of gene duplication as a common response of microorganisms to nutrient limitation.      

Acceptor specificity of the human leukocyte alpha3 fucosyltransferase: role of FucT-VII in the generation of selectin ligands

The alpha3 fucosyltransferase, FucT-VII, is one of the key glycosyltransferases involved in the biosynthesis of the sialyl Lewis X (sLex) antigen on human leukocytes. The sialyl Lewis X antigen (NeuAcalpha(2-3)Galbeta(1-4)[Fucalpha(1-3)]GlcNAc-R) is an essential component of the recruitment of leukocytes to sites of inflammation, mediating the primary interaction between circulating leukocytes and activated endothelium. In order to characterize the enzymatic properties of the leukocyte alpha3 fucosyltransferase FucT-VII, the enzyme has been expressed in Trichoplusia ni insect cells. The enzyme is capable of synthesizing both sLexand sialyl-dimeric-Lexstructures in vitro , from 3'-sialyl-lacNAc and VIM-2 structures, respectively, with only low levels of fucose transfer observed to neutral or 3'-sulfated acceptors. Studies using fucosylated NeuAcalpha(2-3)-(Galbeta(1- 4)GlcNAc)3-Me acceptors demonstrate that FucT-VII is able to synthesize both di-fucosylated and tri-fucosylated structures from mono- fucosylated precursors, but preferentially fucosylates the distal GlcNAc within a polylactosamine chain. Furthermore, the rate of fucosylation of the internal GlcNAc residues is reduced once fucose has been added to the distal GlcNAc. These results indicate that FucT-VII is capable of generating complex selectin ligands, in vitro , however the order of fucose addition to the lactosamine chain affects the rate of selectin ligand synthesis.      

Distinct cytoplasmic regions of the human granulocyte colony-stimulating factor receptor involved in induction of proliferation and maturation.

The granulocyte colony-stimulating factor receptor (G-CSF-R) transduces signals important for the proliferation and maturation of myeloid progenitor cells. To identify functionally important regions in the cytoplasmic domain of the G-CSF-R, we compared the actions of the wild-type receptor, two mutants, and a natural splice variant in transfectants of the mouse pro-B cell line BAF3 and two myeloid cell lines, 32D and L-GM. A region of 55 amino acids adjacent to the transmembrane domain was found to be sufficient for generating a growth signal. The immediate downstream sequence of 30 amino acids substantially enhanced the growth signaling in the three cell lines. In contrast, the carboxy-terminal part of 98 amino acids strongly inhibited growth signaling in the two myeloid cell lines but not in BAF3 cells. Truncation of this region lead to an inability of the G-CSF-R to transduce maturation signals in L-GM cells. An alternative carboxy tail present in a splice variant of the G-CSF-R also inhibited growth signaling, notably in both the myeloid cells and BAF3 cells, but appeared not to be involved in maturation.     

Isolation of a dimethylsulfide-utilizingHyphomicrobium species and its application in biofiltration of polluted air

The methylotrophic bacteriumHyphomicrobium VS was enriched and isolated, using activated sewage sludge as inoculum in mineral medium containing dimethylsulfide (DMS) at a low concentration to prevent toxicity. DMS concentrations above 1 mM proved to be growth inhibiting.Hyphomicrobium VS could use DMS, dimethylsulfoxide (DMSO), methanol, formaldehyde, formate, and methylated amines as carbon and energy source. Carbon was assimilated via the serine pathway. DMS-grown cells respired sulfide, thiosulfate, methanethiol, dimethyldisulfide and dimethyltrisulfide.To testHyphomicrobium VS for application in biofiltration of air polluted with volatile sulfur compounds two laboratory scale trickling biofilters with polyurethane and lava stone as carrier material were started up by inoculation with this bacterium. Both methanol- and DMS-grown cells could be used. Only a short adaptation period was needed. Short term experiments showed that high concentrations of DMS (1–2 µmol 1^–1) were removed very efficiently by the biofilters at space velocities up to 100 h^–1.Abbreviations VSC volatile sulfur compounds - DMS dimethylsulfide - DMDS dimethyldisulfide - DMTS dimethyltrisulfide - MT methanethiol - DMSO dimethylsulfoxide     

Biomass and Biological Activity during the Production of Compost Used as a Substrate in Mushroom Cultivation

The production of a suitable substrate for the cultivation of the common white button mushroom, Agaricus bisporus, is referred to as composting. High microbiological activity causes temperatures of the composting material to rise as high as 80°C. At stacking, an optimal oxygen consumption rate of 140 μmol of O₂ h⁻¹ g (dry weight)⁻¹ was found in the compost at 50°C, whereas the oxygen consumption rate of the end product was lower at all temperatures tested. No significant differences were observed between biomass content and mineralization rate of ¹⁴C-labeled glutamate of the two composts. Biomass content was shown to be a major function of both temperature and the sampling site position in the stack. On the basis of the results reported here, a minimal composting time of 3.3 days for the phase I process was calculated. Further suggestions are made to reduce the time necessary for the production of a substrate for A. bisporus considerably.     

ERRATUM: New Body Mass Estimates for Omomys carteri,a Middle Eocene Primate From North America. Am J Phys Anthropol 109:41–52.

Payseur BA, Covert HA, Vinyard CJ, Dagosto M. 1999. New Body Mass Estimates for Omomys carteri, a Middle Eocene Primate From North America. Am J Phys Anthropol 109:41–52. This article included an incomplete Table 2. The final two columns, showing “Intercept” and “SEE” data were omitted. The complete Table 2, with these two columns included, is provided below.     

The wall ofPinus sylvestris L. pollen tubes

Summary The wall ofPinus sylvestris pollen and pollen tubes was studied by electron microscopy after both rapid-freeze fixation and freeze-substitution (RF-FS) and chemical fixation. Fluorescent probes and antibodies (JIM7 and JIM5) were used to study the distribution of esterified pectin, acidic pectin and callose. The wall texture was studied on shadow-casted whole mounts of pollen tubes after extraction of the wall matrix. The results were compared to current data of angiosperms. TheP. sylvestris pollen wall consists of a sculptured and a nonsculptured exine. The intine consists of a striated outer layer, that stretches partly over the pollen tube wall at the germination side, and a striated inner layer, which is continuous with the pollen tube wall and is likely to be partly deposited after germination. Variable amounts of callose are present in the entire intine. No esterified pectin is detected in the intine and acidic pectin is present in the outer intine layer only. The wall of the antheridial cell contains callose, but no pectin is detectable. The wall between antheridial and tube cell contains numerous plasmodesmata and is bordered by coated pits, indicating intensive communication with the tube cell. Callose and esterified pectin are present in the tip and the younger parts of the pollen tubes, but both ultimately disappear from the tube. Sometimes traces in the form of bands remain present. No acidic pectin is detected in either tip or tube. The wall of the pollen tube tip has a homogenous appearance, but gradually attains a fibrillar character at aging, perhaps because of the disappearance of callose and pectin. No secondary wall formation or callose lining can be seen wilh the electron microscope. The densily of the cellulose microfibrils (CMF) is much lower in the tip than in the tube. Both show CMF in all but axial and nontransverse orientations. In conclusion,P. sylvestris and angiosperm pollen tubes share the presence of esterified pectin in the tip, the oblique orientations of the CMF, and the gradual differentiation of the pollen tube wall, indicating a possible relation to tip growth. The presence of acidic pectin and the deposition of a secondary-wall or callose layer in angiosperms but not inP. sylvestris indicales that these characteristics are not related to tip growth, but probably represent adaptations to the fast and intrastylar growth of angiosperms.Abbreviations CMF cellulose microfibrils - II inner intine - NE nonsculptured exine - OI outer intine - RF-FS rapid-freeze fixation freeze-substitution - SE sculptured exine - SER smooth endoplasmic reliculum - SV secretory vesicles