Acoustic sensing and signal processing techniques for monitoring milk fouling cleaning operations

Large resource investments are necessary in order to minimize the limiting problems arising from food industrial intensive productivity. One of the most challenging concerns is the cleaning status uncertainty among heat transfer areas in dairy heat exchangers, since the effectiveness of this process cannot be easily validated. The present study aimed to develop a low‐power ultrasound sensing method for monitoring the removal of milk fouling deposits along cleaning processes inside an experimental plate heat exchanger structure, connected to a milk piping unit. For that purpose, signal processing, namely acoustic feature extraction, over different wave patterns combined with artificial neural network techniques was used. Measurements were taken in pulse‐echo mode with a handmade 4 MHz ultrasound transducer. While fouling deposits having initial average thickness values of 250 μm (34.5 ± 4.5 mg/cm²) were removed, the acoustic transmissivity increased. Results showed that the signal features follow the expected trends in both, clean and fouled cases, within right guess detection accuracies above 80%. Therefore, when calibrated well, this could be a very sensitive and noninvasive technique for material characterization, as well as a suitable validation method for industrial cleaning cycle operation optimization that could significantly reduce the associated costs.     

Effect of Antiadherents on the Physical and Drug Release Properties of Acrylic Polymeric Films

Antiadherents are used to decrease tackiness of a polymer coating during both processing and subsequent storage. Despite being a common excipient in coating formulae, antiadherents may affect mechanical properties of the coating film as well as drug release from film-coated tablets, but how could addition of antiadherents affect these properties and to what extent and is there a relation between the physical characteristics of the tablet coat and the drug release mechanisms? The aim of this study was to evaluate physical characteristics of films containing different amounts of the antiadherents talc, glyceryl monostearate, and PlasACRYL^TM T20. Eudragit RL30D and Eudragit RS30D as sustained release polymers and Eudragit FS30D as a delayed release material were used. Polymer films were characterized by tensile testing, differential scanning calorimetry (DSC), microscopic examination, and water content as calculated from loss on drying. The effect of antiadherents on in vitro drug release for the model acetylsalicylic acid tablets coated with Eudragit FS30D was also determined. Increasing talc concentration was found to decrease the ability of the polymer films to resist mechanical stress. In contrast, glyceryl monostearate (GMS) and PlasACRYL produced more elastic films. Talc at concentrations higher than 25% caused negative effects, which make 25% concentration recommended to be used with acrylic polymers. All antiadherents delayed the drug release at all coating levels; hence, different tailoring of drug release may be achieved by adjusting antiadherent concentration with coating level.     

Streamlined production of genetically modified T cells with activation,transduction and expansion in closed-system G-Rex bioreactors

BackgroundGas Permeable Rapid Expansion (G-Rex) bioreactors have been shown to efficiently expand immune cells intended for therapeutic use, but do not address the complexity of the viral transduction step required for many engineered T-cell products. Here we demonstrate a novel method for transduction of activated T cells with Vectofusin-1 reagent. Transduction is accomplished in suspension, in G-Rex bioreactors. The simplified transduction step is integrated into a streamlined process that uses a single bioreactor with limited operator intervention.MethodsPeripheral blood mononuclear cells (PBMCs) from healthy donors were thawed, washed and activated with soluble anti-CD3 and anti-CD28 antibodies either in cell culture bags or in G-Rex bioreactors. Cells were cultured in TexMACS GMP medium with interleukin (IL)-7 and IL-15 and transduced with RetroNectin in bags or Vectorfusin-1 in the G-Rex. Total viable cell number, fold expansion, viability, transduction efficiency, phenotype and function were compared between the two processes.ResultsThe simplified process uses a single vessel from activation through harvest and achieves 56% transduction with 29-fold expansion in 11 days. The cells generated in the simplified process do not differ from cells produced in the conventional bag-based process functionally or phenotypically.DiscussionThis study demonstrates that T cells can be transduced in suspension. Further, the conventional method of generating engineered T cells in bags for clinical use can be streamlined to a much simpler, less-expensive process without compromising the quality or function of the cell product.     

Development of sensitive benzofurazan‐based spectrometric methods for analysis of spectinomycin in vials and human biological samples

Spectinomycin hydrochloride (SPEC) is an aminoglycoside antibiotic that has a broad spectrum against several bacterial strains of humans and veterinary infections. However, SPEC lacks a fluorophore or chromophore and this lack makes its analysis a challenge. Our study provides a simple, sensitive and low‐cost spectrofluorimetric/spectrophotometric method based on the reaction between secondary amine groups and a benzofurazan reagent using borate buffer (pH 9.2). The yielding compound was measured fluorimetrically at 530 nm (excitation at 460 nm) with colorimetry at 410 nm. The calibration curves ranged from 30 to 400 ng ml^?1 and from 0.2 to 6 μg ml^?1 for spectrofluorimetric and spectrophotometric analyses, respectively. The limits of detection were calculated to be 4.15 ng ml^?1 and 0.05 μg ml^?1 for spectrofluorimetric and spectrophotometric processes, respectively. The ultra‐affectability and high selectivity of the proposed method permitted analysis of SPEC in the dosage form and in human plasma samples, with good recoveries of about 101.19 and 97.11%, respectively, without any matrix interference. The proposed strategy was validated using International Conference on Harmonization standards and validated bioanalytically using USFDA recommendations.     

Cooling Induced Surface Reconstruction during Synthesis of High‐Ni Layered Oxides

Transition metal layered oxides have been the dominant cathodes in lithium‐ion batteries, and among them, high‐Ni ones (LiNi_xMn_yCo_zO₂; x ≥ 0.7) with greatly boosted capacity and reduced cost are of particular interest for large‐scale applications. The high Ni loading, on the other hand, raises the critical issues of surface instability and poor rate performance. The rational design of synthesis leading to layered LiNi_0.7Mn_0.15Co_0.15O₂ with greatly enhanced rate capability is demonstrated, by implementing a quenching process alternative to the general slow cooling. In situ synchrotron X‐ray diffraction, coupled with surface analysis, is applied to studies of the synthesis process, revealing cooling‐induced surface reconstruction involving Li₂CO₃ accumulation, formation of a Li‐deficient layer and Ni reduction at the particle surface. The reconstruction process occurs predominantly at high temperatures (above 350 °C) and is highly cooling‐rate dependent, implying that surface reconstruction can be suppressed through synthetic control, i.e., quenching to improve the surface stability and rate performance of the synthesized materials. These findings may provide guidance to rational synthesis of high‐Ni cathode materials.     

Melanoma central nervous system metastases: An update to approaches,challenges, and opportunities

In February 2018, the Melanoma Research Foundation and the Moffitt Cancer Center hosted the Second Summit on Melanoma Central Nervous System (CNS) Metastases in Tampa, Florida. In this white paper, we outline the current status of basic science, translational, and clinical research into melanoma brain metastasis development and therapeutic management. We further outline the important challenges that remain for the field and the critical barriers that need to be overcome for continued progress to be made in this clinically difficult area.     

Evaluation of nanoselenium and nanogold activities against murine intestinal schistosomiasis

Nanomedicine is one of the most important methods used to treat human diseases including parasitic diseases. Schistosomiasis is a major parasitic disease that affects human health in tropical regions. Whilst Praziquantel is the main classic antischistosomal drug, new drugs are required due to the poor effect of the drug on the parasite juveniles and immature worms, and the emergence of drug resistant strains of Schistosoma. The present study aimed to examine the curative roles of both gold and selenium nanoparticles on jejunal tissues of mice infected with Schistosoma mansoni. Transmission electron microscopy was used for characterization of nanoparticles. Gold nanoparticles of 1 mg/kg mice body weight and selenium nanoparticles 0.5 mg/kg body weight were inoculated separately into mice infected with S. mansoni. The parasite induced a significant decrease in glutathione levels; however, the levels of nitric oxide and malondialdehyde were significantly increased. Additionally, the parasite introduced deteriorations in histological architecture of the jejunal tissue. Treatment of mice with metal nanoparticles reduced the levels of body weight changes, oxidative stress and histological impairment in the jejunal tissue significantly. Therefore, our results revealed the protective role of both selenium and gold nanoparticles against jejunal injury in mice infected with S. mansoni.     

A meta-taxonomic investigation of the prokaryotic diversity of water bodies impacted by acid mine drainage from the São Domingos mine in southern Portugal

Extremophiles - The prokaryotic communities of water bodies contaminated by acid mine drainage from the São Domingos mining area in southern Portugal were analyzed using a meta-taxonomics...