On the use of oxygenic photosynthesis for the sustainable production of commodity chemicals

A sustainable society will have to largely refrain from the use of fossil carbon deposits. In such a regime, renewable electricity can be harvested as a primary source of energy. However, as for the synthesis of carbon‐based materials from bulk chemicals, an alternative is required. A sustainable approach towards this is the synthesis of commodity chemicals from CO₂, water and sunlight. Multiple paths to achieve this have been designed and tested in the domains of chemistry and biology. In the latter, the use of both chemotrophic and phototrophic organisms has been advocated. ‘Direct conversion’ of CO₂ and H₂O, catalyzed by an oxyphototroph, has excellent prospects to become the most economically competitive of these transformations, because of the relative ease of scale‐up of this process. Significantly, for a wide range of energy and commodity products, a proof of principle via engineering of the corresponding production organism has been provided. In the optimization of a cyanobacterial production organism, a wide range of aspects has to be addressed. Of these, here we will put our focus on: (1) optimizing the (carbon) flux to the desired product; (2) increasing the genetic stability of the producing organism and (3) maximizing its energy conversion efficiency. Significant advances have been made on all these three aspects during the past 2 years and these will be discussed: (1) increasing the carbon partitioning to >50%; (2) aligning product formation with the growth of the cells and (3) expanding the photosynthetically active radiation region for oxygenic photosynthesis.     

Extensive Heterogeneity and Intrinsic Variation in Spatial Genome Organization

1. Download high-res image (220KB)
2. Download full-size image

     

Vacuolar membrane structures and their roles in plant–pathogen interactions

Plant Molecular Biology - Short review focussing on the role and targeting of vacuolar substructure in plant immunity and pathogenesis. Plants lack specialized immune cells, therefore each plant...     

Towards a more accurate future for chlorophyll a and b determinations: the inaccuracies of Daniel Arnon’s assay

Photosynthesis Research - A recent publication (Esteban in New Phytol 217:341–342, 2018) describes how the use and citation of the assay of chlorophylls a and b extracted in aqueous 80%...     

Coupling physiological analysis with proteomic profile to understand the photosynthetic responses of young Euterpe oleracea palms to drought

Photosynthesis Research - This study examined whether drought sensitivity in açaí (Euterpe oleracea Mart.) is associated with reductions in photosynthesis and increasing oxidative stress...     

Absolute configuration of phomactatriene diterpenoids obtained by Wagner‐Meerwein rearrangement of epimeric verticillols

The epimeric diterpenes (+)‐(1S,3E,7E,11S,12S)‐verticilla‐3,7‐dien‐12‐ol ( 1 ), isolated from Bursera suntui, and (+)‐(1S,3E,7E,11S,12R)‐verticilla‐3,7‐dien‐12‐ol ( 2 ), isolated from Bursera kerberi, gave the same Wagner‐Meerwein rearrangement product (?)‐(1E,4Z,8Z,11S,12R)‐phomacta‐1,(15)4,8‐triene ( 3 ). The Et₂O:BF₃‐induced transformations evidence that verticillenes and phomactanes, both containing the bicyclo[9.3.1]pentadecane skeleton, are biogenetically related through the verticillen‐12‐yl cation ( A ⁺ ), which also is a key intermediate in the biosynthetic pathways to generate antitumor taxanes. Molecular modeling using the Monte Carlo protocol, followed by density functional theory (DFT) geometry optimization employing the hybrid functionals B3LYP and B3PW91, both with the DGDZVP basis set, secured the configuration of 3 as followed from the good agreement between the calculated and experimental vibrational circular dichroism spectra. Similar DFT calculations allowed determining the absolute configuration of (+)‐(1R,4R,5R,8S,9S,11S,12R,15R)‐1,15:4,5:8,9‐triepoxyphomactane ( 9 ), which surprisingly derives from epoxidation of the second minimum energy conformer of 3 .     

Daily rhythms of leukocytes populations,biochemical and enzymatic blood parameters in a carnivorous freshwater catfish (Lophiosilurus alexandri)

The aim of this study was to investigate the daily rhythms of hematological, biochemical and enzymatic parameters of the blood of a nocturnal model of fish (Lophiosilurus alexandri) bred in the laboratory (F1). Thirty-six juveniles were stocked in six tanks of a recirculation aquaculture system for 20 days. The fish were exposed to a light:dark cycle of 12:12 h and were fed 1% of biomass twice a day with commercial diet. The daily rhythms of hematological, biochemical and enzymatic parameters were then measured at six sampling times “zeitgeber time = ZT” at four-hour intervals under light:dark 12:12 h (lights on = ZT0, at 8.00 a.m). No differences were observed to alkaline phosphatase, glucose, cortisol, aspartate aminotransferase, superoxide dismutase, total protein and hematocrit (p > 0.05). However, white blood cell count, Lymphocytes (LYN), Neutrophils (NEU), Eosinophil and Neutrophils to Lymphocytes ratio were significant different between sample times (p < 0.05). Also, a significant difference in alanine transaminase was observed, with a peak of production at nighttime. In contrast, glutathione peroxidase peaked at 8:00. Uric acid, magnesium and Calcium (Ca⁺⁺) showed statistically significant differences (p < 0.05). A significant difference was observed (p < 0.05), with a peak of albumin at 08:00 and triglycerides at 12:00, while cholesterol was low (p < 0.05) at 08:00 and higher from 12:00 to 04:00. Cosinor analysis revealed also rhythmicity to SOD, UA, Mg and Ca⁺⁺, ALB and CHO (p < 0.05). In conclusion, the time of day must be considered a key factor when using blood parameters as biomarkers for disease, health and welfare in the L. alexandri aquaculture.     

Dynamic proton-dependent motors power type IX secretion and gliding motility in Flavobacterium

Motile bacteria usually rely on external apparatus like flagella for swimming or pili for twitching. By contrast, gliding bacteria do not rely on obvious surface appendages to move on solid surfaces. Flavobacterium johnsoniae and other bacteria in the Bacteroidetes phylum use adhesins whose movement on the cell surface supports motility. In F. johnsoniae, secretion and helicoidal motion of the main adhesin SprB are intimately linked and depend on the type IX secretion system (T9SS). Both processes necessitate the proton motive force (PMF), which is thought to fuel a molecular motor that comprises the GldL and GldM cytoplasmic membrane proteins. Here, we show that F. johnsoniae gliding motility is powered by the pH gradient component of the PMF. We further delineate the interaction network between the GldLM transmembrane helices (TMHs) and show that conserved glutamate residues in GldL TMH2 are essential for gliding motility, although having distinct roles in SprB secretion and motion. We then demonstrate that the PMF and GldL trigger conformational changes in the GldM periplasmic domain. We finally show that multiple GldLM complexes are distributed in the membrane, suggesting that a network of motors may be present to move SprB along a helical path on the cell surface. Altogether, our results provide evidence that GldL and GldM assemble dynamic membrane channels that use the proton gradient to power both T9SS-dependent secretion of SprB and its motion at the cell surface.

Motile bacteria usually rely on external apparatus like flagella or pili, but gliding bacteria do not rely on obvious surface appendages for their movement. This study shows that bacteria in the phylum Bacteroidetes use proton-dependent motors to power protein secretion and gliding motility.     

Efficient and error-free fluorescent gene tagging in human organoids without double-strand DNA cleavage

CRISPR-associated nucleases are powerful tools for precise genome editing of model systems, including human organoids. Current methods describing fluorescent gene tagging in organoids rely on the generation of DNA double-strand breaks (DSBs) to stimulate homology-directed repair (HDR) or non-homologous end joining (NHEJ)-mediated integration of the desired knock-in. A major downside associated with DSB-mediated genome editing is the required clonal selection and expansion of candidate organoids to verify the genomic integrity of the targeted locus and to confirm the absence of off-target indels. By contrast, concurrent nicking of the genomic locus and targeting vector, known as in-trans paired nicking (ITPN), stimulates efficient HDR-mediated genome editing to generate large knock-ins without introducing DSBs. Here, we show that ITPN allows for fast, highly efficient, and indel-free fluorescent gene tagging in human normal and cancer organoids. Highlighting the ease and efficiency of ITPN, we generate triple fluorescent knock-in organoids where 3 genomic loci were simultaneously modified in a single round of targeting. In addition, we generated model systems with allele-specific readouts by differentially modifying maternal and paternal alleles in one step. ITPN using our palette of targeting vectors, publicly available from Addgene, is ideally suited for generating error-free heterozygous knock-ins in human organoids.

A major downside of double-strand break-mediated genome editing is the need to verify the genomic integrity of the targeted locus and confirm the absence of off-target indels. This study shows that in-trans paired nicking is a mutation-free CRISPR strategy to introduce precise knock-ins into human organoids; its genomic fidelity allows all knock-in cells to be pooled, accelerating the establishment of new organoid models.