Technical Aspects of the Mouse Aortocaval Fistula

Technical aspects of creating an arteriovenous fistula in the mouse are discussed. Under general anesthesia, an abdominal incision is made, and the aorta and inferior vena cava (IVC) are exposed. The proximal infrarenal aorta and the distal aorta are dissected for clamp placement and needle puncture, respectively. Special attention is paid to avoid dissection between the aorta and the IVC. After clamping the aorta, a 25 G needle is used to puncture both walls of the aorta into the IVC. The surrounding connective tissue is used for hemostatic compression. Successful creation of the AVF will show pulsatile arterial blood flow in the IVC. Further confirmation of successful AVF can be achieved by post-operative Doppler ultrasound.     

Induced Pluripotency for Translational Research

The advent of induced pluripotent stem cells （iPSCs） has revolutionized the concept of cellular reprogramming and potentially will solve the immunological compatibility issues that have so far hindered the application of human pluripotent stem cells in regenerative medicine. Recent findings showed that pluripotency is defined by a state of balanced lineage potency, which can be artificially instated through various procedures, including the conventional Yamanaka strategy. As a type of pluripotent stem cell, iPSCs are subject to the usual concerns over purity of differen- tiated derivatives and risks of tumor formation when used for cell-based therapy, though they pro- vide certain advantages in translational research, especially in the areas of personalized medicine, disease modeling and drug screening, iPSC-based technology, human embryonic stem cells （hESCs） and direct lineage conversion each will play distinct roles in specific aspects of translational medi- cine, and continue yielding surprises for scientists and the public.     

One‐Step Fabrication of Ultrathin Porous Nickel Hydroxide‐Manganese Dioxide Hybrid Nanosheets for Supercapacitor Electrodes with Excellent Capacitive Performance

A facile one‐step hydrothermal co‐deposition method for growth of ultrathin Ni(OH)₂‐MnO₂ hybrid nanosheet arrays on three dimensional (3D) macroporous nickel foam is presented. Due to the highly hydrophilic and ultrathin nature of hybrid nanosheets, as well as the synergetic effects of Ni(OH)₂ and MnO₂, the as‐fabricated Ni(OH)₂‐MnO₂ hybrid electrode exhibits an ultrahigh specific capacitance of 2628 F g^?1. Moreover, the asymmetric supercapacitor with the as‐obtained Ni(OH)₂‐MnO₂ hybrid film as the positive electrode and the reduced graphene oxide as the negative electrode has a high energy density (186 Wh kg^?1 at 778 W kg^?1), based on the total mass of active materials.     

Low Electron Scattering Potentials in High Performance Mg2Si0.45Sn0.55 Based Thermoelectric Solid Solutions with Band Convergence

Understanding the electron and phonon transport characteristics is crucial for designing and developing high performance thermoelectric materials. Weak scattering effects on charge carriers, characterized by deformation potential and alloy scattering potential, are favorable for thermoelectric solid solutions to enable high carrier mobility and thereby promising thermoelectric performance. Mg₂(Si,Sn) solid solutions have attracted much attention due to their low cost and environmental compatibility. Usually, their high thermoelectric performance with ZT ～ 1 is ascribed to the band convergence and reduced lattice thermal conductivity caused by alloying. In this work, both a low deformation potential Ξ = 13 eV and a low alloy scattering potential U = 0.7 eV are found for the thermoelectric alloys by characterizing and modeling of thermoelectric transport properties. The band convergence is also verified by the increased density‐of‐states effective mass. It is proposed that, in addition to band convergence and reduced lattice thermal conductivity, the low deformation potential and alloy scattering potential are additional intrinsic features that contribute to the high thermoelectric performance of the solid solutions.     

Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room‐Temperature Sodium‐Ion Batteries

Layered sodium titanium oxide, Na₂Ti₃O₇, is synthesized by a solid‐state reaction method as a potential anode for sodium‐ion batteries. Through optimization of the electrolyte and binder, the microsized Na₂Ti₃O₇ electrode delivers a reversible capacity of 188 mA h g^?1 in 1 M NaFSI/PC electrolyte at a current rate of 0.1C in a voltage range of 0.0–3.0 V, with sodium alginate as binder. The average Na storage voltage plateau is found at ca. 0.3 V vs. Na⁺/Na, in good agreement with a first‐principles prediction of 0.35 V. The Na storage properties in Na₂Ti₃O₇ are investigated from thermodynamic and kinetic aspects. By reducing particle size, the nanosized Na₂Ti₃O₇ exhibits much higher capacity, but still with unsatisfied cyclic properties. The solid‐state interphase layer on Na₂Ti₃O₇ electrode is analyzed. A zero‐current overpotential related to thermodynamic factors is observed for both nano‐ and microsized Na₂Ti₃O₇. The electronic structure, Na⁺ ion transport and conductivity are investigated by the combination of first‐principles calculation and electrochemical characterizations. On the basis of the vacancy‐hopping mechanism, a quasi‐3D energy favorable trajectory is proposed for Na₂Ti₃O₇. The Na⁺ ions diffuse between the TiO₆ octahedron layers with pretty low activation energy of 0.186 eV.     

巴中地区上消化道出血反复发作相关性因素分析

目的：了解巴中地区上消化道出血反复发作的原因,为治疗提供临床循证医学证据。方法：通过对2011年4月~2012年11月巴中地区1134例上消化道出血中132例反复发作的患者进行调查统计,分析这上消化道出血反复发作的132例患者的年龄、生理特征、生活饮食习惯、精神状态、生活压力等多种相关因素。结果：发现饮食不当、精神紧张、腹腔感染、腹腔内压增高、输液输血过速、过量等是造成病情反复发作的主要诱因。结论：通过消除疾病的诱发因素,认真做好健康教育指导,积极治疗原发病是预防反复发作的有效措施。     

Resonant Mode Analysis of the Nanoscale Surface Plasmon Polariton Waveguide Filter with Rectangle Cavity

The resonant mode characteristics of the nanoscale surface plasmon polaritons (SPP) waveguide filter with rectangle cavity are studied theoretically. By using the finite difference time domain method, both the band-stop- and band-pass-type rectangle SPP filters are analyzed. The results show that the whispering gallery mode (WGM) and the Fabry–Perot (FP) mode can be supported by the rectangle SPP resonator. Furthermore, both traveling-wave mode and standing-wave mode can be realized by the WGM, while only standing-wave mode can be introduced by the FP mode. The traveling-wave mode can only be realized by the square-shaped SPP resonator, and the traveling-wave mode is splitted into two standing-wave modes by transforming the cavity shape from square to rectangle. Also, the effects of the cavity shape, cavity size, and coupling gap size on the transmission spectra of the SPP resonators are analyzed in detail. This simple SPP waveguide filter is very promising for the high-density SPP waveguide integrations.     

Young Children's Probability of Dying Before and After Their Mother's Death: A Rural South African Population-Based Surveillance Study

Background

There is evidence that a young child''s risk of dying increases following the mother''s death, but little is known about the risk when the mother becomes very ill prior to her death. We hypothesized that children would be more likely to die during the period several months before their mother''s death, as well as for several months after her death. Therefore we investigated the relationship between young children''s likelihood of dying and the timing of their mother''s death and, in particular, the existence of a critical period of increased risk.

Methods and Findings

Data from a health and socio-demographic surveillance system in rural South Africa were collected on children 0–5 y of age from 1 January 1994 to 31 December 2008. Discrete time survival analysis was used to estimate children''s probability of dying before and after their mother''s death, accounting for moderators. 1,244 children (3% of sample) died from 1994 to 2008. The probability of child death began to rise 6–11 mo prior to the mother''s death and increased markedly during the 2 mo immediately before the month of her death (odds ratio [OR] 7.1 [95% CI 3.9–12.7]), in the month of her death (OR 12.6 [6.2–25.3]), and during the 2 mo following her death (OR 7.0 [3.2–15.6]). This increase in the probability of dying was more pronounced for children whose mothers died of AIDS or tuberculosis compared to other causes of death, but the pattern remained for causes unrelated to AIDS/tuberculosis. Infants aged 0–6 mo at the time of their mother''s death were nine times more likely to die than children aged 2–5 y. The limitations of the study included the lack of knowledge about precisely when a very ill mother will die, a lack of information about child nutrition and care, and the diagnosis of AIDS deaths by verbal autopsy rather than serostatus.

Conclusions

Young children in lower income settings are more likely to die not only after their mother''s death but also in the months before, when she is seriously ill. Interventions are urgently needed to support families both when the mother becomes very ill and after her death. Please see later in the article for the Editors'' Summary     

Unsupervised Clustering of Subcellular Protein Expression Patterns in High-Throughput Microscopy Images Reveals Protein Complexes and Functional Relationships between Proteins

Protein subcellular localization has been systematically characterized in budding yeast using fluorescently tagged proteins. Based on the fluorescence microscopy images, subcellular localization of many proteins can be classified automatically using supervised machine learning approaches that have been trained to recognize predefined image classes based on statistical features. Here, we present an unsupervised analysis of protein expression patterns in a set of high-resolution, high-throughput microscope images. Our analysis is based on 7 biologically interpretable features which are evaluated on automatically identified cells, and whose cell-stage dependency is captured by a continuous model for cell growth. We show that it is possible to identify most previously identified localization patterns in a cluster analysis based on these features and that similarities between the inferred expression patterns contain more information about protein function than can be explained by a previous manual categorization of subcellular localization. Furthermore, the inferred cell-stage associated to each fluorescence measurement allows us to visualize large groups of proteins entering the bud at specific stages of bud growth. These correspond to proteins localized to organelles, revealing that the organelles must be entering the bud in a stereotypical order. We also identify and organize a smaller group of proteins that show subtle differences in the way they move around the bud during growth. Our results suggest that biologically interpretable features based on explicit models of cell morphology will yield unprecedented power for pattern discovery in high-resolution, high-throughput microscopy images.     

Detecting Genetic Association of Common Human Facial Morphological Variation Using High Density 3D Image Registration

Human facial morphology is a combination of many complex traits. Little is known about the genetic basis of common facial morphological variation. Existing association studies have largely used simple landmark-distances as surrogates for the complex morphological phenotypes of the face. However, this can result in decreased statistical power and unclear inference of shape changes. In this study, we applied a new image registration approach that automatically identified the salient landmarks and aligned the sample faces using high density pixel points. Based on this high density registration, three different phenotype data schemes were used to test the association between the common facial morphological variation and 10 candidate SNPs, and their performances were compared. The first scheme used traditional landmark-distances; the second relied on the geometric analysis of 15 landmarks and the third used geometric analysis of a dense registration of ∼30,000 3D points. We found that the two geometric approaches were highly consistent in their detection of morphological changes. The geometric method using dense registration further demonstrated superiority in the fine inference of shape changes and 3D face modeling. Several candidate SNPs showed potential associations with different facial features. In particular, one SNP, a known risk factor of non-syndromic cleft lips/palates, rs642961 in the IRF6 gene, was validated to strongly predict normal lip shape variation in female Han Chinese. This study further demonstrated that dense face registration may substantially improve the detection and characterization of genetic association in common facial variation.