Cytoplasmic p21(Cip1/WAF1) regulates neurite remodeling by inhibiting Rho-kinase activity

p21(Cip1/WAF1) has cell cycle inhibitory activity by binding to and inhibiting both cyclin/Cdk kinases and proliferating cell nuclear antigen. Here we show that p21(Cip1/WAF1) is induced in the cytoplasm during the course of differentiation of chick retinal precursor cells and N1E-115 cells. Ectopic expression of p21(Cip1/WAF1) lacking the nuclear localization signal in N1E-115 cells and NIH3T3 cells affects the formation of actin structures, characteristic of inactivation of Rho. p21(Cip1/WAF1) forms a complex with Rho-kinase and inhibits its activity in vitro and in vivo. Neurite outgrowth and branching from the hippocampal neurons are promoted if p21(Cip1/WAF1) is expressed abundantly in the cytoplasm. These results suggest that cytoplasmic p21(Cip1/WAF1) may contribute to the developmental process of the newborn neurons that extend axons and dendrites into target regions.     

Irreversible damage to photosystem I by chilling in the light: cause of the degradation of chlorophyll after returning to normal growth temperature

The recovery process after chilling-induced photoinhibition of photosystem I (PSI) was studied in leaves of a chilling-sensitive plant, cucumber (Cucumis sativus L. cv. Nanshin). Determination of chlorophyll content, photosystem (PS) activities in vivo and in vitro, and the amount of reaction-center subunits of PSI revealed that: (i) The content of chlorophyll decreased to 70% of the original level gradually from 1 to 3 days after exposure to a low temperature. (ii) The amount of functional PSI per unit leaf area was reduced to 30% of the initial level by the chilling treatment. The amount of functional PSI gradually increased during the next 6 days but only to 50% of the original level. (iii) When expressed on a chlorophyll basis, however, the amount of functional PSI recovered to 90% of the original level 6 days after the treatment. (iv) The residual amount of chlorophyll on the third day after the treatment closely correlated with the amount of functional PSI at that point. These results indicate that the decrease in chlorophyll content at a normal growth temperature after chilling treatment is a consequence of the degradation of irreversibly damaged PSI complexes. Immunoblot analysis confirmed that PsaAB protein, the reaction-center subunits of PSI, was degraded during the 3 days after chilling treatment. Some characteristics of the chilling injury frequently reported, i.e. irreversibility of the injury and development of visible symptoms at room temperature, can be explained as a consequence of the chilling-induced photoinhibition of PSI.     

Leaf senescence and starvation-induced chlorosis are accelerated by the disruption of an Arabidopsis autophagy gene

Autophagy is an intracellular process for vacuolar bulk degradation of cytoplasmic components. The molecular machinery responsible for yeast and mammalian autophagy has recently begun to be elucidated at the cellular level, but the role that autophagy plays at the organismal level has yet to be determined. In this study, a genome-wide search revealed significant conservation between yeast and plant autophagy genes. Twenty-five plant genes that are homologous to 12 yeast genes essential for autophagy were discovered. We identified an Arabidopsis mutant carrying a T-DNA insertion within AtAPG9, which is the only ortholog of yeast Apg9 in Arabidopsis (atapg9-1). AtAPG9 is transcribed in every wild-type organ tested but not in the atapg9-1 mutant. Under nitrogen or carbon-starvation conditions, chlorosis was observed earlier in atapg9-1 cotyledons and rosette leaves compared with wild-type plants. Furthermore, atapg9-1 exhibited a reduction in seed set when nitrogen starved. Even under nutrient growth conditions, bolting and natural leaf senescence were accelerated in atapg9-1 plants. Senescence-associated genes SEN1 and YSL4 were up-regulated in atapg9-1 before induction of senescence, unlike in wild type. All of these phenotypes were complemented by the expression of wild-type AtAPG9 in atapg9-1 plants. These results imply that autophagy is required for maintenance of the cellular viability under nutrient-limited conditions and for efficient nutrient use as a whole plant.     

Characterization of the aryl hydrocarbon receptor repressor gene and association of its Pro185Ala polymorphism with micropenis

BACKGROUND: Genetic background of a fetus contributes to the abnormal development after teratogen exposure. In rodents, in utero exposure to dioxins affects male external genital development. The effects of dioxins are mediated via the aryl hydrocarbon receptor (AHR) and its binding protein, aryl hydrocarbon receptor nuclear translocator (ARNT). In mice, aryl hydrocarbon receptor repressor (AHRR), which binds to ARNT in competition with AHR, plays a critical negative regulatory role in AHR signaling. We attempt to characterize the human AHRR gene and investigate the relationship between AHRR polymorphisms and the incidence of micropenis, a phenotype of undermasculinization. METHODS: We identified and characterized the human homolog of mouse AHRR, taking advantage of the publicly available draft version of the human genome sequence. After detecting an AHRR protein polymorphism by the direct sequencing of pooled human genomic DNA, we evaluated the association between the polymorphism and the presence or absence of micropenis (< -2.5 SD) in patients with micropenis and control subjects. RESULTS: The deduced sequence for human AHRR (715 residues) and the mouse AHRR protein exhibited 81% sequence homology to each other. The Pro185Ala polymorphism was identified between the PAS-A region and the highly conserved arginine/cysteine-rich RCFRCRL/VRC region. Forty-six percent (27/59) of patients with micropenis and 27% (22/80) of the controls were homozygous for 185Pro; this difference in frequencies was significant (P = 0.03). CONCLUSIONS: Homozygosity for the 185Pro allele of AHRR may increase the susceptibility of a fetus to the undermasculinizing effects of dioxin exposure in utero, presumably through the diminished inhibition of AHR-mediated signaling.     

The human MYOD1 transgene is suppressed by 5-bromodeoxyuridine in mouse myoblasts

5-Bromodeoxyuridine (BrdU) immediately and clearly suppresses expression of the mouse Myod1 and human MYOD1 genes in myoblastic cells. Despite various studies, its molecular mechanism remains unknown. We failed to identify a BrdU-responsive element of the genes in experiments in which reporter constructs containing known regulatory sequences were transferred to mouse C2C12 myoblasts. Therefore, we transferred human chromosome 11 containing the MYOD1 gene to the cells by microcell-mediated chromosome transfer. In the resulting microcell hybrids, BrdU suppressed expression of the transgene, as determined by quantitative real-time RT-PCR analysis. We then transfected human PAC clones containing the MYOD1 gene to the cells. In the resulting transfectants, BrdU suppressed the transgene similarly. Deletion analysis suggested that a BrdU-responsive element or chromatin structure exists between 24 and 47 kb upstream of the gene. These results are the first demonstrating BrdU-responsiveness of a transgene for the known BrdU-responsive genes and facilitating determination of its precise responsible structure.     

Chromosome-induced microtubule assembly mediated by TPX2 is required for spindle formation in HeLa cells

In Xenopus laevis egg extracts, TPX2 is required for the Ran-GTP-dependent assembly of microtubules around chromosomes. Here we show that interfering with the function of the human homologue of TPX2 in HeLa cells causes defects in microtubule organization during mitosis. Suppressing the expression of human TPX2 by RNA interference leads to the formation of two microtubule asters that do not interact and do not form a spindle. Our results suggest that in vivo, even in the presence of duplicated centrosomes, spindle formation requires the function of TPX2 to generate a stable bipolar spindle with overlapping antiparallel microtubule arrays. This indicates that chromosome-induced microtubule production is a general requirement for the formation of functional spindles in animal cells.     

Engineering of Ralstonia eutropha for production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from fructose and solid-state properties of the copolymer

Recombinant Ralstonia eutropha capable of producing poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) copolymer [P(3HB-co-3HHx)] from fructose was engineered by introduction of genes for crotonyl-CoA reductase (CCR) from Streptomyces cinnamonensis (ccrSc) and for PHA synthase and (R)-specific enoyl-CoA hydratase from Aeromonas caviae (phaC-JAc). In this recombinant strain, C6-acyl-CoA intermediates were provided via beta-ketothiolase-mediated elongation of butyryl-CoA, which was generated from crotonyl-CoA by the function of CCR. The recombinant strain could accumulate the copolyester up to 48 wt % of dry cell weight with 1.5 mol % of 3HHx fraction from fructose, when the expression of ccrSc under the control of the PBAD promoter was induced with 0.01% L-arabinose. The absence of L-arabinose or the deletion of ccrSc from the plasmid resulted in accumulation of poly(3-hydroxybutyrate) homopolymer, indicating the critical role of CCR in the formation of the 3-hydroxyhexanoate unit. Higher CCR activity obtained by the addition of a larger amount of L-arabinose did not affect the composition but reduced the intracellular content of the copolyester. The P(3HB-co-1.5 mol % 3HHx) copolyester produced from fructose by the recombinant R. eutropha showed relatively lower melting temperatures (150 degrees C and 161 degrees C) and lower crystallinity (48 +/- 5%) compared to those (175 degrees C and 60 +/- 5%) of P(3HB) homopolymer. It has been found that the incorporation of a small amount (1.5 mol %) of 3HHx units into P(3HB) sequences leads to a remarkable change in the solid-state properties of P(3HB) crystals. The present study demonstrates the potential of the engineered pathway for the production of copolyesters having favorable characteristics from inexpensive carbon resources.     

Molecular mobility and phase structure of biodegradable poly(butylene succinate) and poly(butylene succinate-co-butylene adipate)

Molecular mobility and phase structure of biodegradable poly(butylene succinate) (PBS) and poly(butylene succinate-co-20 mol % butylene adipate) [P(BS-co-20 mol % BA)] have been investigated by high-resolution solid-state (13)C NMR. For both samples, two components with different (13)C spin-lattice relaxation time (T(1C)) values have been observed in the crystalline region. The crystalline component with shorter T(1C) value is assignable to the interface near amorphous phase. The crystalline component with longer T(1C) value is ascribed to the inside of the crystalline region. On the basis of T(1C), it has been concluded that the BA units are not included in the crystalline region of P(BS-co-20 mol % BA). Molecular mobility and higher-ordered structure of amorphous phase have been also compared between the melt and solid state. Variable-temperature high-resolution (13)C NMR measurements for the amorphous phase have revealed the remarkable difference in dynamics and structure between the melt and solid state.     

Crystalline/amorphous phase structure and molecular mobility of biodegradable poly(butylene adipate-co-butylene terephthalate) and related polyesters

Differential scanning calorimetry (DSC), atomic force microscopy (AFM), wide-angle X-ray scattering (WAXD), and solid-state (13)C NMR have been used to investigate the crystalline/amorphous structure and molecular mobility of biodegradable poly(butylene adipate-co-44 mol % butylene terephthalate) [P(BA-co-44 mol % BT)] copolyester sample crystallized from the melt. The DSC endothermic peak, which is ascribed to the melting of the crystalline region, was broad relative to those reported for conventional partially crystalline polyesters. In AFM observation, spherulitic morphology was not observed while small particles with a size of about 100 nm were detected. The WAXD pattern of the sample was very broad. These results have indicated that a melt-crystallized P(BA-co-44 mol % BT) sample contains small crystals with a wide distribution in size. A solid-state (13)C NMR technique was also used to perform molecular-level and selective analyses for both butylene terephthalate and butylene adipate units. For the butylene terephthalate units, the existence of two components with different microstructure and molecular mobility was detected: one component was assigned to the alpha-form crystal of poly(butylene terephthalate) homopolymer (PBT) and the other was in amorphous regions. In contrast, all of butylene adipate units were located in amorphous regions. Solid-state NMR data have suggested that sizes of crystalline regions are less than 3 nm.