Effect of organics on sulfur-utilizing autotrophic denitrification under mixotrophic conditions

Thiol groups were introduced to dermal bovine collagen (DBC) by the reaction with gamma-thiobutyrolactone. Thiolated DBC reacted with 2-pyridyl disulfide group introduced to lysozyme to form DBC-lysozyme conjugate through disulfide bridge. The enzymatic activity of freshly prepared conjugate was almost unchanged during ten consecutive runs over one month. The DBC-lysozyme conjugate showed the maximum activity at pH 6.3, on the contrary, that of native lysozyme was pH 9.0. Thermal stability of lysozyme was enhanced by the conjugation with DBC. The present results showed that the conjugation using thiolated collagen could be one of the useful alternative approaches to modify collagen with bioactive molecules.     

A hydrophilic and hydrophobic organic solvent mixture enhances enzyme stability in organic media

Binary mixtures of hydrophilic and hydrophobic solvents were assessed for their ability to balance enzyme activity with the conservation of enzyme stability in organic media. Acetone, dioxane and dodecane were chosen as model organic solvents, and subtilisin Carlsberg and horseradish peroxidase (HRP) were chosen as model enzymes. Residual enzyme activities were measured to monitor enzyme stability, and the fluorescence intensity of HRP was monitored to investigate structural changes due to the presence of an organic solvent. Enzyme stability increased with the increasing hydrophobicity of the solvent mixture used, and a solvent mixture with a high log P value (~ >4) was capable of conserving enzyme stability. Enzyme stability in organic media can be conserved therefore with a mixture of hydrophilic and hydrophobic solvents: this approach might be used as a general and practical strategy for optimizing enzyme activity and stability for industrial applications.     

Suppression of ceramide-induced cell death by hepatitis C virus core protein

The hepatitis C virus (HCV) core protein is believed to be one of viral proteins that are capable of preventing virus-infected cell death upon various stimuli. But, the effect of the HCV core protein on apoptosis that is induced by various stimuli is contradictory. We examined the possibility that the HCV core protein affects the ceramide-induced cell death in cells expressing the HCV core protein through the sphingomyelin pathway. Cell death that is induced by C(2)-ceramide and bacterial sphingomyelinase was analyzed in 293 cells that constitutively expressed the HCV core protein and compared with 293 cells that were stably transfected only with the expression vector. The HCV core protein inhibited the cell death that was induced by these reagents. The protective effects of the HCV core protein on ceramide-induced cell death were reflected by the reduced expression of p21(WAF1/Cip1/Sid1) and the sustained expression of the Bcl-2 protein in the HCV core-expressing cells with respect to the vector-transfected cells. These results suggest that the HCV core protein in 293 cells plays a role in the modulation of the apoptotic response that is induced by ceramide. Also, the ability of the HCV core protein to suppress apoptosis might have important implications in understanding the pathogenesis of the HCV infection.     

Production of nattokinase by high cell density fed-batch culture of Bacillus subtilis

Bacillus subtilis was cultivated to high cell density for nattokinase production by pH-stat fed-batch culture. A concentrated mixture solution of glucose and peptone was automatically added by acid-supplying pump when culture pH rose above high limit. Effect of the ratio of glucose to peptone in feeding solution was investigated on cell growth and nattokinase production by changing the ratio from 0.2 to 5 g glucose/g peptone. The highest cell concentration was 77 g/L when the ratio was 0.2 g glucose/g peptone. Cell concentration decreased with increasing the ratio of glucose to peptone in feeding solution, while the optimum condition existed for nattokinase production. The highest nattokinase activity was 14,500 unit/mL at a ratio of 0.33 g glucose/g peptone, which was 4.3 times higher than that in batch culture.     

Constitutive production of human leptin by fed-batch culture of recombinant rpoS- Escherichia coli

High-level production of human leptin by fed-batch culture of recombinant Escherichia coli using constitutive promoter system was investigated. For the constitutive expression of the obese gene encoding human leptin, the strong constitutive HCE promoter cloned from the D-amino acid aminotransferase gene of Geobacillus toebii was used. To develop an optimal host-vector system, several different recombinant E. coli strains were compared for leptin production. In flask cultures, E. coli FMJ123, which is a rpoS mutant strain, showed the highest level of leptin production (41% of total proteins). By comparing the expression levels of leptin in several different rpoS- and rpoS+ strains, it could be concluded that rpoS mutation positively affected constitutive production of leptin. For the large-scale production of human leptin, fed-batch cultures of recombinant E. coli FMJ123 were carried out using three different feeding solutions--chemically defined, yeast extract-containing, and casamino acid-containing feeding solutions. Among these, the use of casamino acid-containing feeding solution allowed production of leptin up to 2.1 g/L, which was 2.1- and 1.8-fold higher than that obtained with chemically defined and yeast extract-contained feeding solutions, respectively. These results suggest that the HCE promoter can be used for the efficient production of leptin, and most likely other recombinant proteins, in a constitutive manner.     

Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy

Crystalline structures of cellulose (named as Cell 1), NaOH-treated cellulose (Cell 2), and subsequent CO2-treated cellulose (Cell 2-C) were analyzed by wide-angle X-ray diffraction and FTIR spectroscopy. Transformation from cellulose I to cellulose II was observed by X-ray diffraction for Cell 2 treated with 15-20 wt% NaOH. Subsequent treatment with CO2 also transformed the Cell 2-C treated with 5-10 wt% NaOH. Many of the FTIR bands including 2901, 1431, 1282, 1236, 1202, 1165, 1032, and 897 cm(-1) were shifted to higher wave number (by 2-13 cm(-1)). However, the bands at 3352, 1373, and 983 cm(-1) were shifted to lower wave number (by 3-95 cm(-1)). In contrast to the bands at 1337, 1114, and 1058 cm(-1), the absorbances measured at 1263, 993, 897, and 668 cm(-1) were increased. The FTIR spectra of hydrogen-bonded OH stretching vibrations at around 3352 cm(-1) were resolved into three bands for cellulose I and four bands for cellulose II, assuming that all the vibration modes follow Gaussian distribution. The bands of 1 (3518 cm(-1)), 2 (3349 cm(-1)), and 3 (3195 cm(-1)) were related to the sum of valence vibration of an H-bonded OH group and an intramolecular hydrogen bond of 2-OH ...O-6, intramolecular hydrogen bond of 3-OH...O-5 and the intermolecular hydrogen bond of 6-O...HO-3', respectively. Compared with the bands of cellulose I, a new band of 4 (3115 cm(-1)) related to intermolecular hydrogen bond of 2-OH...O-2' and/or intermolecular hydrogen bond of 6-OH...O-2' in cellulose II appeared. The crystallinity index (CI) was obtained by X-ray diffraction [CI(XD)] and FTIR spectroscopy [CI(IR)]. Including absorbance ratios such as A1431,1419/A897,894 and A1263/A1202,1200, the CI(IR) was evaluated by the absorbance ratios using all the characteristic absorbances of cellulose. The CI(XD) was calculated by the method of Jayme and Knolle. In addition, X-ray diffraction curves, with and without amorphous halo correction, were resolved into portions of cellulose I and cellulose II lattice. From the ratio of the peak area, that is, peak area of cellulose I (or cellulose II)/total peak area, CI(XD) were divided into CI(XD-CI) for cellulose I and CI(XD-CII) for cellulose II. The correlation between CI(XD-CI) (or CI(XD-CII)) and CI(IR) was evaluated, and the bands at 2901 (2802), 1373 (1376), 897 (894), 1263, 668 cm(-1) were good for the internal standard (or denominator) of CI(IR), which increased the correlation coefficient. Both fraction of the absorbances showing peak shift were assigned as the alternate components of CI(IR). The crystallite size was decreased to constant value for Cell 2 treated at >or= 15 wt% NaOH. The crystallite size of Cell 2-C (cellulose II) was smaller than that of Cell 2 (cellulose I) treated at 5-10 wt% NaOH. But the crystallite size of Cell 2-C (cellulose II) was larger than that of Cell 2 (cellulose II) treated at 15-20 wt% NaOH.     

Application of fuzzy reasoning to control of glucose and ethanol concentrations in baker's yeast culture

Fuzzy reasoning was applied to control both ethanol and glucose concentrations in fed-batch cultures of baker's yeast. This fuzzy controller consisted of three membership functions (concentrations of dissolved oxygen (DO), ethanol and glucose) and 18 production rules. Fuzzy inference was carried out by IF {A is a and B is b,...#x007D;, THEN {C is c} from the on-line measured concentrations of DO, ethanol and glucose. When medium concentrations of ethanol and glucose in fed-batch culture of baker's yeast were set at 2 g/l and 0.2 g/l, both ethanol and glucose concentrations were controlled at 2.67±0.35 g/l and 0.27±0.25 g/l, respectively, ethanol production was reduced from 26 g/l to 34 g/l, cell yield increased from 0.38 to 0.53 g dry cell/g consumed glucose and ethanol yield decreased from 0.50 to 0.14 g ethanol/g consumed glucose, respectively, as compared with those of the glucose only control at 0.2 g/l.     

An Imported Case of Cystic Echinococcosis in the Liver

A 25-year-old Uzbek male presented with right upper abdominal pain for 20 days. On radiologic studies, a huge cystic mass was noticed in the right liver which was suspected as parasitic. The patient received right hepatic segmentectomy (segment 7), and the surgically resected mass was confirmed as cystic echinococcosis (CE), measuring 10.5 cm in its diameter. The inner surface of the cyst was bile-stained. The patient was discharged on the 8th hospital day, and was rechecked 6 months after the surgical intervention without any evidence of recurrence. The present report describes findings of an imported case of CE which represented ultrasound images of the ''ball of wool''.     

Identification of a functionally relevant signal peptide of mouse ficolin A

Mouse ficolin A is a plasma protein with lectin activity, and plays a role in host defense by binding carbohydrates, especially GlcNAc, on microorganisms. The ficolin A subunit consists of an N-terminal signal peptide, a collagen-like domain, and a C-terminal fibrinogen-like domain. In this study, we show that ficolin A can be synthesized and oligomerized in a cell and secreted into culture medium. We also identify a functionally relevant signal peptide of ficolin A by using MS/MS analysis to determine the N-terminal sequence of secreted ficolin A. When the signal peptide of mouse ficolin A was fused with enhanced green fluorescent protein (EGFP), EGFP was released into HEK 293 cell medium, suggesting that the signal peptide can efficiently direct ficolin A secretion. Moreover, our results suggest that the signal peptide of ficolin A has potential application for the production of useful secretory proteins.