Structural characterization and physiological function of component B from Methanosarcina thermophila

The electron donor (component B) to the methyl coenzyme M methylreductase system from Methanosarcina thermophila was isolated as the 7-methyl derivative and characterized. Gas chromatography-mass spectrometry and ¹H NMR analyses identified this derivative as 7-methylthioheptanoylthreonine phosphate (CH₃-S-HTP), indicating that the original component B had the same structure (HS-HTP) as previously determined for component B from Methanobacterium thermoautotrophicum. The heterodisulfide of HS-HTP and coenzyme M (HS-CoM, 2-mercaptoethanesulfonate) was enzymatically reduced in cell extracts using electrons supplied by either H₂ or CO, confirming that HS-HTP was a functional molecule in M. thermophila.     

Energetics and regulations of formate and hydrogen metabolism by Methanobacterium formicicum

Accumulation of formate to millimolar levels was observed during the growth of Methanobacterium formicicum species on H₂–CO₂. Hydrogen was also produced during formate metabolism by M. formicicum. The amount of formate accumulated in the medium or the amount H₂ released in gas phase was influenced by the bicarbonate concentration. The formate hydrogenlyase system was constitutive but regulated by formate. When methanogenesis was inhibited by addition of 2-bromoethane sulfonate, M. formicicum synthesized formate from H₂ plus HCO _inf3 ^sup- or produced H₂ from formate to a steady-state level at which point the Gibbs free energy (G) available for formate synthesis or H₂ production was approximately -2 to -3 kJ/reaction. Formate conversion to methane was inhibited in the presence of high H₂ pressure. The relative rates of conversion of formate and H₂ were apparently controlled by the G available for formate synthesis, hydrogen production, methane production from formate and methane production from H₂. Results from ¹⁴C-tracer tests indicated that a rapid isotopic exchange between HCOO^- and HCO _inf3 ^sup- occurred during the growth of M. formicicum on H₂–CO₂. Data from metabolism of ¹⁴C-labelled formate to methane suggested that formate was initially split to H₂ and HCO _inf3 ^sup- and then subsequently converted to methane. When molybdate was replaced with tungstate in the growth media, the growth of M. formicicum strain MF on H₂–CO₂ was inhibited although production of methane was not Formate synthesis from H₂ was also inhibited.     

Localization of the gene for human heart fatty acid binding protein to chromosome 1p32-1p33

Among 639 spontaneous abortions between the 8th and 14th week of gestation 342 (53.5%) revealed an abnormal karyotype. While the rate of trisomies distinctly increased with advancing maternal age, a decrease in the rate of 45,X conceptuses and polyploidies was observed among abortions from older women. The overall relation of XXXXXXYY among the tetraploidies was 1411 and that of XXXXXYXYY among the triploidies was 26 361. However, when the latter was related to maternal age, a reversal of the XXXXXY ratio of 12 in the younger to 21 in the older age groups became evident. Furthermore a decrease in the rate of paternally derived partial hydatidiform moles was found among the triploid abortion specimens from older women. From these observations we conclude that digyny plays a major role in the origin of triploidy in the increased maternal age groups, while diandry related to immaturity of oocytes and impairment of oocyte cortical function is more frequent in triploid abortions from younger women.     

Summer drought exposure,stand structure,and soil properties jointly control the growth of European beech along a steep precipitation gradient in northern Germany

Increasing exposure to climate warming-related drought and heat threatens forest vitality in many regions on earth, with the trees' vulnerability likely depending on local climatic aridity, recent climate trends, edaphic conditions, and the drought acclimatization and adaptation of populations. Studies exploring tree species' vulnerability to climate change often have a local focus or model the species' entire distribution range, which hampers the separation of climatic and edaphic drivers of drought and heat vulnerability. We compared recent radial growth trends and the sensitivity of growth to drought and heat in central populations of a widespread and naturally dominant tree species in Europe, European beech (Fagus sylvatica), at 30 forest sites across a steep precipitation gradient (500–850 mm year⁻¹) of short length to assess the species' adaptive potential. Size-standardized basal area increment remained more constant during the period of accelerated warming since the early 1980s in populations with >360 mm growing season precipitation (April–September), while growth trends were negative at sites with <360 mm. Climatic drought in June appeared as the most influential climatic factor affecting radial growth, with a stronger effect at drier sites. A decadal decrease in the climatic water balance of the summer was identified as the most important factor leading to growth decline, which is amplified by higher stem densities. Inter-annual growth variability has increased since the early 1980s, and variability is generally higher at drier and sandier sites. Similarly, within-population growth synchrony is higher at sandier sites and has increased with a decrease in the June climatic water balance. Our results caution against predicting the drought vulnerability of trees solely from climate projections, as soil properties emerged as an important modulating factor. We conclude that beech is facing recent growth decline at drier sites in the centre of its distribution range, driven by climate change-related climate aridification.     

Causal inference and large-scale expert validation shed light on the drivers of SDM accuracy and variance

Aim

To develop a causal understanding of the drivers of Species distribution model (SDM) performance.

Location

United Kingdom (UK).

Methods

We measured the accuracy and variance of SDMs fitted for 518 species of invertebrate and plant in the UK. Our measure of variance reflects variation among replicate model fits, and taxon experts assessed model accuracy. Using directed acyclic graphs, we developed a causal model depicting plausible effects of explanatory variables (e.g. species' prevalence, sample size) on SDM accuracy and variance and quantified those effects using a multilevel piecewise path model.

Results

According to our model, sample size and niche completeness (proportion of a species' niche covered by sampling) directly affect SDM accuracy and variance. Prevalence and range completeness have indirect effects mediated by sample size. Challenging conventional wisdom, we found that the effect of prevalence on SDM accuracy is positive. This reflects the facts that sample size has a positive effect on accuracy and larger sample sizes are possible for widespread species. It is possible, however, that the omission of an unobserved confounder biased this effect. Previous studies, which reported negative correlations between prevalence and SDM accuracy, conditioned on sample size.

Main conclusions

Our model explicates the causal basis of previously reported correlations between SDM performance and species/data characteristics. It also suggests that niche completeness has similarly large effects on SDM accuracy and variance as sample size. Analysts should consider niche completeness, or proxies thereof, in addition to sample size when deciding whether modelling is worthwhile.     

Evaluation of DAPI as a Fluorescent Probe for DNA in Viable Petunia Protoplasts

4',6-Diamidino-2-phenyl-indole (DAPI), is a fluorescent probe that specifically and quantitatively stains DNA. Electroporation of viable Petunia protoplasts in the presence of DAPI revealed integral fluorescence that was similar for both the electroporated and fixed protoplasts. indicating quantitative staining of DNA. DAPI fluorescence was localized in the nuclei of viable protoplasts of Petunia. Protoplasts had a short term viability of 56-65% of the control (non-electroporated. unstained) protoplasts as determined by fluorescein diacetate staining 24 hr following electroporation in the presence of DAPI. The majority (84% of the number originally cultured) of these protoplasts subjected to electroporation were able to form a cell wall, but most did not form microcalli because they were blocked in cell division. The three week plating efficiency for protoplasts exposed to DAPI was 4% of the original number of protoplasts initially cultured compared to 30% for the control. DAPI should not be used as a fluorescent probe for plant protoplasts when the protoplasts are cultured for sustained growth because the levels of DAPI required to obtain quantitative staining of the DNA resulted in inhibition of the cell cycle. DAPI may, however, be used as a fluorescent DNA probe for short term (24 hr) studies.     

Enhancement of Antigenic Site Detection with Gold Labeled Secondary and Tertiary Antibodies Using the Immunogold-Silver Staining Method

We report a modification of the immunogold-silver staining method (IGSS) for localizing hepatic phosphoenolpyruvate carboxykinase (PEPCK) in tissue sections, and we compare the efficacy of localizing the primary antibody with either a 5 nm gold labeled secondary antibody or 5 nm gold labeled secondary and tertiary antibodies. Light microscope examination of 10 μm frozen sections demonstrated that the use of combined secondary and tertiary gold labeled antibodies was superior to using a secondary gold labeled antibody alone. The increased labeling density (number of colloidal gold particles/antigenic site/cell) achieved by combined gold labeled antibodies was confirmed by electron microscopy. The increased labeling density resulted in a two-thirds reduction in the time needed for the IGSS physical development of the silver shells and less background. We achieved intense specific staining of hepatocytes expressing PEPCK while minimizing background staining. The use of combined secondary and tertiary gold labeled antibodies enhances the signal-to-noise ratio, achieves high resolution and is a suitable method for use in both light and electron microscopy.     

DNA/DNA hybridization studies of carnivorous marsupials. III. Relationships among species ofDidelphis (Didelphidae)

We report three sets of DNA hybridization experiments conducted to determine relationships among species ofDidelphis (D. albiventris, D. marsupialis, D. virginiana). The 1989 and 1991 sets had fewer replicates per cell than the 1990 series (3.4 and 5.4 vs 9), but in 1991 we distinguished two populations ofD. marsupialis and utilized several individuals for each heterologous comparison. BothPhilander opossum andLutreolina crassicaudata were used as outgroups in 1989, but onlyLutreolina was included in subsequent sets. For each set, we calculated all four standard indices of thermal stability (T _mode,T _m,T ₅₀ H, and NPH) and constructed trees by least-squares (FITCH) and neighbor-joining methods, both before and after correction for asymmetric reciprocal cell values. Subsets of the 1989 data lacking eitherPhilander orLutreolina were analyzed similarly. To explore measurement imprecision, the corrected and uncorrected matrices for each of the four indices were bootstrapped 100 times for the 1989 set and subsets and 1000 times for the 1990 and 1991 sets. Again, for the 1990 and 1991 data, an additional 100 bootstrapped distances were fitted to user trees representing the three possible pairings ofDidelphis spp. to determine the significance of the FITCH branch lengths. The successive experimental sets generated increasingly consistent evidence for pairingD. marsupialis withD. albiventris. The 1989 experiments involved just 85 comparisons, and only T _mode's pairedD. marsupialis withD. albiventris (at bootstrap percentages of 70% or above), but did so whetherPhilander orLutreolina or both were included as the outgroup(s). FITCH and neighbor-joining trees had identical topologies for T _mode's but sometimes differed for the other measures. In contrast, all but one of the corresponding FITCH and neighborjoining trees matched for the 1990 and 1991 data, and three of the four distance measures (T _mode, T _m, and T ₅₀ H) unitedD. marsupialis withD. albiventris at bootstrap percentages averaging 81%; NPH gave a different result for 1990, associatingD. marsupialis withD. virginiana. Further, all but 2 of the 16 matrices for 1990 and 1991 gave mean bootstrapped branch lengths for a consensus pairing that were positive and at least one standard deviation from zero, despite the very short internodes recovered. These results illustrate that the potential of DNA hybridization for resolving very close relationships depends on both the index and the experimental design employed. We conclude that of the three species,D. albiventris andD. marsupialis shared a more recent common ancestor and estimate thatDidelphis spp. have diverged at about 0.39% in nucleotide sequence per myr.Deceased.     

Analysis of the Intermolecular Contacts within Sickle Hemoglobin Fibers: Effect of Site-Specific Substitutions, Fiber Pitch, and Double-Strand Disorder

An atomic model of the sickle hemoglobin (HbS) fiber was synthesized by combining the molecular coordinates of the fiber (obtained from electron microscopy) with atomic coordinates of the sickle hemoglobin double strand (obtained from X-ray crystallography). The model is stereochemically acceptable. The majority of polymerization-sensitive HbS mutants are located at fiber contact sites and the majority of the mutants that do not affect polymerization are not located at contact sites. The residues at intermolecular contacts in the fiber model are reported. We have searched the coordinate space in the vicinity of the EM reconstructions to find models with alternative sets of coordinates that satisfy the mutant data, contain 5-Å contacts between double strands, and are stereochemically acceptable. This involved a systematic examination over 297 different models. The alternative fiber models were generated with a range of fiber pitch, double-strand positions, and double-strand polarity. Models which had unacceptably close contacts between atoms, failed to satisfy the mutant data, or did not have 5-Å contacts between double strands were considered unacceptable. None of the acceptable alternative fiber models improved the agreement between the polymerization behavior of HbS mutants and their contact site location. However, several models could account for the polymerization data equally well. Residue locations for single-site HbS mutations that could discriminate between alternative fiber models are proposed. The twist of HbS fibers varies in an apparent random manner with an average rotation of 7.8 ± 2.5° per molecule and a maximum rotation of 16° per molecule. The number of interdouble-strand contacts as a function of fiber twist shows a broad maximum around 9° and may account for the observed range of fiber pitch. This study shows that the upper limit on the fiber twist could result from a loss of axial contacts and repulsive van der Waals interactions between residues involved in interstrand contacts. The loss of axial contacts limits the radial growth of the fiber. In the appendix we analyze the methodology used by I. Cretegny and S. J. Edelstein [(1993) J. Mol. Biol. 230, 733-738] to build a model of the fiber. Our examination reveals shortcomings in the methodology of Cretegny and Edelstein. One result of these shortcomings is that the model synthesized by Cretegny and Edelstein is not stereochemically acceptable because it gives rise to a large number of excessively close (less than 1.4 Å) atom-atom contacts, suggesting interpenetration of the molecular envelopes.