Novel 2,2'-[1,2-ethanediylbis(nitriloethylidyne)]-bis-hydroquinone double-wall carbon nanotube paste electrode for simultaneous determination of epinephrine, uric acid and folic acid

The electro-oxidation of epinephrine (EP), uric acid (UA), folic acid (FA), and their mixture has been studied by modified carbon nanotube paste electrode of 2,2'-[1,2-ethanediylbis(nitriloethylidyne)]-bis-hydroquinone using cyclic voltammetry, chronoamperometry and differential pulse voltammetry. This modified electrode exhibited potent and persistent electron mediating behavior followed by well-separated oxidation peaks towards EP, UA and FA with activation overpotential. For the ternary mixture containing EP, UA and FA the three compounds can be well separated from each other at the scan rate of 20mVs(-1). The obtained catalytic peak current, was linearly dependent on the EP, UA and FA concentrations in the range of 0.7-1200muM, 25-750muM and 15-800muM and the detection limits for EP, UA and FA were 0.216+/-0.004, 8.8+/-0.2 and 11.0+/-0.3muM, respectively. The diffusion coefficient (D), and the kinetic parameters such as electron transfer coefficient, (alpha) and heterogeneous rate constant, (k') for EP were also determined using electrochemical approaches. The modified electrode showed good sensitivity, selectivity and stability, and was employed for the determination of EP, UA and FA in the real samples.     

Comparison of Beta-value and M-value methods for quantifying methylation levels by microarray analysis

Background  

High-throughput profiling of DNA methylation status of CpG islands is crucial to understand the epigenetic regulation of genes. The microarray-based Infinium methylation assay by Illumina is one platform for low-cost high-throughput methylation profiling. Both Beta-value and M-value statistics have been used as metrics to measure methylation levels. However, there are no detailed studies of their relations and their strengths and limitations.     

Detection of methicillin-resistance (mec-A) gene inStaphylococcus aureus strains by PCR and determination of antibiotic susceptibility

Methicillin-ResistantStaphylococcus aureus (MSRA) has become a frequent cause of serious infections. Extended hospitalization and antibiotic therapy have been identified as additional risk factors for MRSA carrier and infection. The aim of this study was to determine the incidence of MRSA infections in the hospitals affiliated to Hamedan University of Medical Sciences. SeventyS. aureus clinical strains were isolated from patients from June 2005 to June 2006 and examined by PCR and conventional microbiological tests. Then, the antibiotic susceptibility to methicillin/oxacillin and other antibiotics were performed by Disc Diffusion Agar (DDA). The results of this study showed that methicillin resistance gene was detected in 35 (50%) and 22 (31.4%) cases by PCR and DDA, respectively. The results of antibiotic susceptibility assays also showed there were high resistance MRSA strains to penicilin (100%), cloxacillin (91.4%), tetracycline (74.2%), cotrimoxazole (68.5%), erythromycin (68.5%) and less resistance to rifampin (11.4). Two MRSA also had decreased susceptibility to vancomycin. But the strains of Methicillin-SensitiveS. aureus (MSSA) showed high sensitivity to all antibiotics profiles except to penicillin (complete resistance). As a conclusion, the resistance to methicillin/oxacillin ofS. aureus in Hamedan hospitals has reached to 50% and they show multidrug resistance.     

Development of an optimal formulation for oxidative stability of walnut-beverage emulsions based on gum arabic and xanthan gum using response surface methodology

The susceptibility of lipids to oxidation is one of the most fundamental problems in oil-in-water emulsions. A response surface methodology 5-level-3-factor central-composite rotatable design was applied to study the effects of key formula ingredients including walnut oil (WO, 3-6%, w/w), gum arabic (GA, 5-10%, w/w) and xanthan gum (XG, 0.05-0.15%, w/w) on lipid oxidation in walnut-beverage emulsions. During 30 days’ storage, the oxidation process was monitored by evaluating the peroxide value, anisidine value and total oxidation (Totox) value in different emulsion formulations. Use of XG as a stabilizer at high concentrations considerably inhibited the oxidation of WO in the prepared emulsions. The experimental data were satisfactorily fitted to quadratic models using multiple regression analysis. The optimum conditions to obtain the minimum peroxide (0.923 mequiv. O₂/kg oil), anisidine (0.500) and Totox (2.347) values are met when a walnut-beverage emulsion is formulated with 3% WO, 10% GA and 0.12% XG.     

Mechanistic studies on N-acetylmuramic acid 6-phosphate hydrolase (MurQ): an etherase involved in peptidoglycan recycling

Peptidoglycan recycling is a process in which bacteria import cell wall degradation products and incorporate them back into either peptidoglycan biosynthesis or basic metabolic pathways. The enzyme MurQ is an N-acetylmuramic acid 6-phosphate (MurNAc 6-phosphate) hydrolase (or etherase) that hydrolyzes the lactyl side chain from MurNAc 6-phosphate and generates GlcNAc 6-phosphate. This study supports a mechanism involving the syn elimination of lactate to give an alpha,beta-unsaturated aldehyde with (E)-stereochemistry, followed by the syn addition of water to give product. The observation of both a kinetic isotope effect slowing the reaction of [2-(2)H]MurNAc 6-phosphate and the incorporation of solvent-derived deuterium into C2 of the product indicates that the C2-H bond is cleaved during catalysis. The observation that the solvent-derived (18)O isotope is incorporated into the C3 position of the product, but not the C1 position, provides evidence of the cleavage of the C3-O bond and argues against imine formation. The finding that 3-chloro-3-deoxy-GlcNAc 6-phosphate serves as an alternate substrate is also consistent with an elimination-addition mechanism. Upon extended incubations of MurQ with GlcNAc 6-phosphate, the alpha,beta-unsaturated aldehydic intermediate accumulates in solution, and (1)H NMR analysis indicates it exists as the ring-closed form of the (E)-alkene. A structural model is developed for the Escherichia coli MurQ and is compared to that of the structural homologue glucosamine-6-phosphate synthase. Putative active site acid/base residues are probed by mutagenesis, and Glu83 and Glu114 are found to be crucial for catalysis. The Glu83Ala mutant is essentially inactive as an etherase yet is capable of exchanging the C2 proton of substrate with solvent-derived deuterium. This suggests that Glu83 may function as the acidic residue that protonates the departing lactate.     

Prospects of implant with locking plate in fixation of subtrochanteric fracture: experimental demonstration of its potential benefits on synthetic femur model with supportive hierarchical nonlinear hyperelastic finite element analysis

Background

Effective fixation of fracture requires careful selection of a suitable implant to provide stability and durability. Implant with a feature of locking plate (LP) has been used widely for treating distal fractures in femur because of its favourable clinical outcome, but its potential in fixing proximal fractures in the subtrochancteric region has yet to be explored. Therefore, this comparative study was undertaken to demonstrate the merits of the LP implant in treating the subtrochancteric fracture by comparing its performance limits against those obtained with the more traditional implants; angle blade plate (ABP) and dynamic condylar screw plate (DCSP).

Materials and Methods

Nine standard composite femurs were acquired, divided into three groups and fixed with LP (n?=?3), ABP (n?=?3) and DCSP (n?=?3). The fracture was modeled by a 20?mm gap created at the subtrochanteric region to experimentally study the biomechanical response of each implant under both static and dynamic axial loading paradigms. To confirm the experimental findings and to understand the critical interactions at the boundaries, the synthetic femur/implant systems were numerically analyzed by constructing hierarchical finite element models with nonlinear hyperelastic properties. The predictions from the analyses were then compared against the experimental measurements to demonstrate the validity of each numeric model, and to characterize the internal load distribution in the femur and load bearing properties of each implant.

Results

The average measurements indicated that the constructs with ABP, DCPS and LP respectively had overall stiffness values of 70.9, 110.2 and 131.4?N/mm, and exhibited reversible deformations of 12.4, 4.9 and 4.1?mm when the applied dynamic load was 400?N and plastic deformations of 11.3, 2.4 and 1.4?mm when the load was 1000?N. The corresponding peak cyclic loads to failure were 1100, 1167 and 1600?N. The errors between the displacements measured experimentally or predicted by the nonlinear hierarchical hyperelastic model were less than 18?%. In the implanted femur heads, the principal stresses were spatially heterogeneous for ABP and DCSP but more homogenous for LP, meaning LP had lower stress concentrations.

Conclusion

When fixed with the LP implant, the synthetic femur model of the subtrochancteric fracture consistently exceeds in the key biomechanical measures of stability and durability. These capabilities suggest increased resistance to fatigue and failure, which are highly desirable features expected of functional implants and hence make the LP implant potentially a viable alternative to the conventional ABP or DCSP in the treatment of subtrochancteric femur fractures for the betterment of clinical outcome.     

Synthesis of Iron-Amino Acid Chelates and Evaluation of Their Efficacy as Iron Source and Growth Stimulator for Tomato in Nutrient Solution Culture

Supplying a sufficient amount of available iron (Fe) for plant growth in hydroponic nutrient solutions is a great challenge. The chelators commonly used to supply Fe in nutrient solutions have several disadvantages and may negatively affect plant growth. In this research study we have synthesized certain Fe-amino acid chelates, including Fe-arginine [Fe(Arg)₂], Fe-glycine [Fe(Gly)₂], and Fe-histidine [Fe(His)₂], and evaluated their efficacy as an Fe source for two tomato cultivars (Lycopersicon esculentum Mill. cvs. ‘Rani’ and ‘Sarika’) grown in nutrient solution. Application of Fe-amino acid chelates significantly increased root and shoot dry matter yield of both tomato cultivars compared with Fe-EDTA. Tomato plants supplied with Fe-amino acid chelates also accumulated significantly higher levels of Fe, Zn, and N in their roots and shoots compared with those supplied with Fe-EDTA. In ‘Sarika’, the effect of Fe-amino acid chelates on shoot Fe content was in the order Fe(His)₂?>?Fe(Gly)₂?>?Fe(Arg)₂. In ‘Rani’, the addition of all synthesized Fe-amino acid chelates significantly increased activity of ascorbate peroxidase (APX) in comparison with Fe-EDTA, whereas in ‘Sarika’, only Fe(His)₂ increased shoot APX activity. The results obtained indicated that using Fe-amino acid chelates in the nutrient solution could supply a sufficient amount of Fe for plant uptake and also improve root and shoot growth of tomato plants, although this increase was cultivar-dependent. According to the results, Fe-amino acid chelates can be used as an alternative for Fe-EDTA to supply Fe in nutrient solutions.