Characterization of human alpha fetoprotein charge microheterogeneity during fetal development.

Aliquotes of human amniotic fluid (AF), fetal serum (FS), and cord blood (CB) were obtained as by-products of routine clinical diagnostic procedures at term or in the second trimester of pregnancy. When samples of CB were applied to a pH 5.5-4 chromatofocusing gradient, three isoforms of AFP could be resolved; a pl 4.57 form (isoform IA, 52% AFP), a pl 4.27 form (isoform IB, 43% AFP), and one species that was bound to the column but could be eluted with 1.0 M NaCl (isoform II, pl less than 4.00, 5% AFP). Term AF displayed a profile similar to that observed in term CB. When samples of 15-20-week gestation AF were chromatofocused, the immunoreactive AFP recovered was distributed between isoform IA and IB (60%) and isoform II (40%). FS and AF obtained from same pregnancy (23-26 weeks) displayed an identical chromatofocusing profile. Aliquotes of AF subjected to conA revealed 83% reactive variants compared with greater than 95% reactive variants for CB. FS displayed a conA profile identical to CB. When individual CB charge isoforms were isolated and subjected to conA analysis, greater than 97% of the AFP bound to conA. In contrast, when AFP isoform IA and IB were isolated from midgestation AF, approximately 22% of the AFP did not bind to the lectin while 100% of isolated AFP isoform II eluted as the reactive variant. These data suggest that human AFP exists as at least three charge and two lectin variants and that the charge profile may change during fetal development.     

Growth kinetics of Lactobacillus acidophilus under ohmic heating

Lactobacillus acidophilus OSU133 was inoculated into MRS broth in a fermenter vessel and incubated at 30, 35, or 45 degrees C with agitation. Incubation temperatures were attained by conventional or ohmic heating. An electrical current at low (15 V) or high (40 V) voltage was used to heat the culture directly during fermentations under ohmic heating. The growth parameters (lag period, minimum generation time, and maximum growth) and changes in pH were determined during fermentation. Metabolic activities (consumption of glucose and production of lactic acid and bacteriocin) were determined during fermentation at 35 degrees C under both heating methods. Lag period for L. acidophilus was affected appreciably by the method of heating, but the magnitude of these changes depended on the fermentation temperature. When fermentation was done at 30 degrees C, lag period decreased by 94% under low-voltage ohmic, compared with conventional, heating methods. Ohmic heating did not change the generation time significantly and caused slight, but significant (p < 0.01) decrease in maximum growth. Therefore, the electric current enhances the early stages, but it inhibits the late stages of growth. Ohmic, compared with conventional, heating resulted in higher final pH and lower bacteriocin activity in the fermented medium. However, ohmic heating at 35 degrees C had minimal effect on glucose utilization and lactic acid production by L. acidophilus. Results show that measurement of the electric current when ohmic heating is done at a constant voltage may be used in monitoring such fermentations. In conclusion, ohmic heating is potentially useful in certain applications related to fermented foods. (c) 1996 John Wiley & Sons, Inc.     

Fine-scale mapping of physicochemical and microbial landscapes of the coral skeleton

The coral skeleton harbours a diverse community of bacteria and microeukaryotes exposed to light, O₂ and pH gradients, but how such physicochemical gradients affect the coral skeleton microbiome remains unclear. In this study, we employed chemical imaging of O₂ and pH, hyperspectral reflectance imaging and spatially resolved taxonomic and inferred functional microbiome characterization to explore links between the skeleton microenvironment and microbiome in the reef-building corals Porites lutea and Paragoniastrea benhami. The physicochemical environment was more stable in the deep skeleton, and the diversity and evenness of the bacterial community increased with skeletal depth, suggesting that the microbiome was stratified along the physicochemical gradients. The bulk of the coral skeleton was in a low O₂ habitat, whereas pH varied from pH 6–9 with depth. Physicochemical gradients of O₂ and pH of the coral skeleton explained the β-diversity of the bacterial communities, and skeletal layers that showed O₂ peaks had a higher relative abundance of endolithic algae, reflecting a link between the abiotic environment and the microbiome composition. Our study links the physicochemical, microbial and functional landscapes of the coral skeleton and provides new insights into the involvement of skeletal microbes in the coral holobiont metabolism.     

Genetic recombination in Micromonospora rosaria by protoplast fusion

Auxotrophic strains of Micromonospora rosaria were isolated by N-methyl-N'-nitro-N'-nitrosoguanidine mutagenesis and used in intraspecific recombination by protoplast fusion. High-frequency fusion of protoplasts of M. rosaria strains was induced by polyethylene glycol (molecular weight, 1,000) (PEG 1,000). The optimum concentration of PEG 1,000 for fusion of M. rosaria was 50% (wt/vol). PEG 4,000 was slightly better than PEG 1,000 at concentrations lower than 50% (wt/vol). The recombinant frequency did not increase after treatment with PEG 1,000 (50% [wt/vol]) for longer than 20 min. Under these conditions, fusion with many auxotrophic strains of M. rosaria resulted in a high frequency of formation of true recombinants (sometimes more than 10%). Additionally, when ros (rosamicin nonproducing) strains were crossed by protoplast fusion; about 5% of the resultant prototrophic recombinants were shown to have the ros+ (rosamicin producing) characteristic restored. Rosamicin production by M. rosaria colonies was clearly distinguished by the broth overlay method. The results of fusion experiments between ros and ros+ strains indicated that either the chromosomal mutation or pleiotrophic effect of some auxotrophic markers is involved.     

Immunohistochemical localization of 36 and 29 kDa proteins in sparganum.

Antigenic proteins of 36 and 29 kDa were localized in Spirometra mansoni plerocercoid (sparganum) immunohistochemically by avidin biotin complex (ABC) staining. When polyclonal antibodies such as BALB/c mouse serum immunized with crude saline extract of sparganum or confirmed sparganosis sera were reacted as primary antibodies, the positive chromogen (3-amino, 9-ethylcarbazole) reactions were recognized at syncytial tegument, tegumental cells, muscle and parenchymal cells and lining cells of excretory canals. A monoclonal antibody (MAb) which was reacting to 36 and 29 kDa proteins in the extract of the worm was localized at the syncytial tegument and tegumental cells. The present results suggested that the potent antigenic proteins of 36 and 29 kDa in sparganum were produced at the tegumental cells and transported to the syncytial tegument.     

Purification of monomeric agmatine iminohydrolase from soybean

Agmatine iminohydrolase (EC 3.5.3.12) was purified to homogeneity from the cytosol of soybean (Glycine max) axes by chromatographic separations on Sephadex G-25, Bio-rex 70, and agmatine-affinity columns. The enzyme was homogeneous by the criteria of analytical gel electrophoresis. Molecular weights estimated by Sephadex G-100 gel and sodium dodecyl sulfate polyacrylamide gel electrophoresis were 70,000, indicating that the soybean axes enzyme is a monomer, in contrast to the dimeric enzymes from corn and rice. The isoelectric point determined by gel electrofocusing was 7.5, higher than that of the corn enzyme (4.7). The optimal pH and temperature for activity were 6.5 and 50 degrees C, respectively. The enzyme has high specificity for agmatine, and the Km for agmatine was 2.5 x 10(-3) molar. The enzyme was sensitive to Cu2+ and also was inhibited by p-hydroxymercuribenzoate.     

Immobilization of enzymes on activated carbon: selection and preparation of the carbon support.

Based upon its superior catalytic activity for H2O2 decomposition, a bituminous coal-based activated carbon was selected for investigations of pretreatment and enzyme immobilization methods. Pretreatments considered include acid washing, exposure to strong oxidizing agents, contact with concentrated peroxide solutions, nitration and amination, isothiocyanate derivatization, silanization, and stearic acid coating. Effects of these pretreatments on morphology and trace-metal content of the carbon pellets have been studied using scanning electron microscopy and dispersive analysis of x rays. Immobilization of glucoamylase by adsorption, glutaraldehyde crosslinking, and covalent attachment to carbon activated by water-soluble diimide or diazotization have been examined. These different enzyme-carbon catalysts have been characterized by their enzyme loading, enzyme activity, catalytic activity for H2O2 decomposition, or combinations of these measures of performance.     

Biochemical and strain properties of CJD prions: complexity versus simplicity

Prions, the agents responsible for transmissible spongiform encephalopathies, are infectious proteins consisting primarily of scrapie prion protein (PrP(Sc)), a misfolded, β-sheet enriched and aggregated form of the host-encoded cellular prion protein (PrP(C)). Their propagation is based on an autocatalytic PrP conversion process. Despite the lack of a nucleic acid genome, different prion strains have been isolated from animal diseases. Increasing evidence supports the view that strain-specific properties may be enciphered within conformational variations of PrP(Sc). In humans, sporadic Creutzfeldt-Jakob disease (sCJD) is the most frequent form of prion diseases and has demonstrated a wide phenotypic and molecular spectrum. In contrast, variant Creutzfeldt-Jakob disease (vCJD), which results from oral exposure to the agent of bovine spongiform encephalopathy, is a highly stereotyped disease, that, until now, has only occurred in patients who are methionine homozygous at codon 129 of the PrP gene. Recent research has provided consistent evidence of strain diversity in sCJD and also, unexpectedly enough, in vCJD. Here, we discuss the puzzling biochemical/pathological diversity of human prion disorders and the relationship of that diversity to the biological properties of the agent as demonstrated by strain typing in experimental models.     

Molecular weight standards for calibration of gel filtration and sodium dodecyl sulfate-polyacrylamide gel electrophoresis: ferritin and apoferritin

Ferritin and apoferritin are widely used for the calibration of gel filtration columns and sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis and are commercially offered for these purposes as part of molecular weight calibration kits. Many of the reported applications are severely in error as presented in leading references and application manuals. The manufacturers have based their recommendations on incorrect physicochemical parameters in the literature and incorrect or inadmissible assumptions about the protein subunit composition and architecture and have not taken into account the unusual resistance of these proteins to denaturation in SDS. Here the relevant physicochemical parameters of horse spleen apoferritin as reported in the literature are critically reevaluated and the best current estimates are identified as the following: weight average molecular weight of apoferritin, Mw = 481,200; molecular weight of subunits, major subunit, ML = 19,889; minor subunit, MH = 22,200; apparent specific volumes in 0.02 M acetate buffer, pH 5.5, and 0.1 M NaCl, phi = 0.721 ml g-1 and phi' = 0.743 ml g-1; partial specific volume at 20 degrees C, v = 0.738 ml g-1; viscosimetric molar volume, M[n] = 1.78 X 10(6) ml mol-1; Stokes radius, RSt = 67.1 A; viscosimetric radius, Rvis = 65.6 A; sedimentation coefficient S degrees 20, w = 16.6 S; translational diffusion coefficient, D20, w = 3.24 X 10(-7) cm2 s-1. Recommendations are provided for proper application of ferritin and apoferritin for calibration purposes in gel filtration and SDS-polyacrylamide gel electrophoresis.