Fate of salmonellas and competing flora in meat sample enrichments in buffered peptone water and in Muller-Kauffmann's tetrathionate medium

Studies have been carried out in which growth patterns of a Salmonella sp. and competing micro-organisms, especially other Enterobacteriaceae, were followed during pre-enrichment in buffered peptone water (BPw) and subsequent selective enrichment in tetrathionate broth (TBB). Pre-enrichment cultures were inoculated with minced meat and three reference samples containing nalidixic acid-resistant salmonellas. Irrespective of their initial numbers in BPw, Enterobacteriaceae increased to 10(8)/ml or more. During incubation in TBB at 43 degrees C, numbers of lactose-positive Enterobacteriaceae decreased in most enrichments which resulted in a positive salmonella isolation, but remained constant in the majority of those that did not. Levels of lactose-negative Enterobacteriaceae did not decrease in most salmonella-positive tests, but did so in half of the salmonella-negative ones. In the salmonella-positive tests the numbers of salmonellas had increased to 10(3)-10(7)/ml in BPw and after transfer to TBB slowly reached 10(4)/ml or more. In all cases the numbers of salmonellas exceeded those of the competing flora on brilliant green agar (BGA). In the salmonella-negative tests the numbers of salmonellas had increased less in BPw and decreased in most of the TBB enrichments. In none of these negative tests did the numbers of salmonellas exceed those of the competing flora on BGA. Escherichia coli dominated in most of the salmonella-negative tests. The results suggest more influence of lactose-positive than lactose-negative Enterobacteriaceae on the detection of salmonellas. The effect of competing microorganisms seems to depend not only upon their initial numbers, but also upon the types that can interact with salmonellas during selective enrichment.     

Neutron RBE for primate spinal cord treated with clinical regimens.

The RBEs of high-energy neutrons given in 9 or 12 fractions for cervical spinal cord injury in rhesus monkeys was determined using photons at 2.2 Gy per fraction as the reference radiation. Because the dose-response functions were not parallel, the RBE was not constant but rather increased with dose or, equivalently, with the probability of myelopathy. This required the development of a novel method of determining the RBE versus level of response. The RBE is presented as a function of probability of myelopathy from 0.1 to 99%. At a 50% incidence of myelopathy, the RBE (+/- 1 SE) was 5.22 +/- 0.15. A difference in the histopathology of lesions induced by photon and neutron treatments was observed.     

A Cross-Sectional Randomised Study of Fracture Risk in People with HIV Infection in the Probono 1 Study

Objective

To determine comparative fracture risk in HIV patients compared with uninfected controls.

Design

A randomised cross-sectional study assessing bone mineral density (BMD), fracture history and risk factors in the 2 groups.

Setting

Hospital Outpatients.

Subbbjects

222 HIV infected patients and an equal number of age-matched controls. Assessments: Fracture risk factors were assessed and biochemical, endocrine and bone markers measured. BMD was assessed at hip and spine. 10-year fracture probability (FRAX) and remaining lifetime fracture probability (RFLP) were calculated.

Main Outcome Measures

BMD, and history of fractures.

Results

Reported fractures occurred more frequently in HIV than controls, (45 vs. 16; 20.3 vs. 7%; OR=3.27; p=0.0001), and unsurprisingly in this age range, non-fragility fractures in men substantially contributed to this increase. Osteoporosis was more prevalent in patients with HIV (17.6% vs. 3.6%, p<0.0001). BMD was most reduced, and predicted fracture rates most increased, at the spine. Low BMD was associated with antiretroviral therapy (ART), low body mass index and PTH. 10-year FRAX risk was <5% for all groups. RLFP was greater in patients with HIV (OR=1.22; p=0.003) and increased with ART (2.4 vs. 1.50; OR= 1.50; p=0.03).

Conclusions

The increased fracture rate in HIV patients in our relatively youthful population is partly driven by fractures, including non-fragility fractures, in men. Nonetheless, these findings may herald a rise in osteoporotic fractures in HIV patients. An appropriate screening and management response is required to assess these risks and identify associated lifestyle factors that are also associated with other conditions such as cardiovascular disease and diabetes.     

Quantification of human hepatic glutathione S-transferases.

Human hepatic glutathione S-transferase (GST) subunits were characterized and quantified with the aid of a recently developed h.p.l.c. method. In 20 hepatic tissue specimens the absolute amounts of the basic Class Alpha subunits B1 and B2, the near-neutral Class Mu subunits mu and psi and the acidic subunit pi were determined. The average total amount of GST was 37 micrograms/mg of cytosolic protein, with the Class Alpha GST being the predominant class (84% of total GSTs), and pi as the sole representative of the Class Pi GSTs present in the lowest concentration (4% of total GSTs). Large interindividual differences were observed for all subunits, with variations up to 27-fold, depending on the subunit. For the Class Alpha GST-subunits B1 and B2, a biphasic ratio was observed. The genetic polymorphism of the subunits mu and psi was confirmed by h.p.l.c. analysis, and correlated with the enzymic glutathione conjugation of trans-stilbene oxide and with Western blotting of cytosols, using a monoclonal anti-(Class Mu GST) antibody. Of the 20 livers examined, ten contained only mu, whereas the occurrence of psi alone, and the combination of mu and psi, were found in only one liver each.     

Inheritance patterns of ITS1, chloroplasts and mitochondria in artificial hybrids of the seaweeds Fucus serratus and F. evanescens (Phaeophyceae)

Patterns of nuclear and organelle inheritance among artificial hybrids of the seaweeds Fucus serratus and F. evanescens were detected using single-strand conformation polymorphism (SSCP). Three alleles were identified in the 231?bp rDNA-ITS1 gene (nuclear): two in F. serratus and one in F. evanescens. Alleles differed by 1–2?bp and all hybrids possessed one allele from each parent. Two haplotypes were present in the 288?bp Rubisco spacer (chloroplast), differentiated by a 33?bp indel. Two haplotypes differing by a single nucleotide were found in a 135?bp region of nad11 gene (mitochondrion). Both organelles are maternally inherited, as all hybrids contained the haplotypes of the parent contributing the egg. Although laboratory hybrids among Fucus spp. have been produced previously, this is the first time that both nuclear and cytoplasmic genetic markers have been used to document inheritance patterns. SSCPs analysed on an automated sequencer offer a rapid and powerful approach for identifying suspected hybrids from field samples, as well as a screen for intraspecific and intra-individual variation in DNA regions prior to confirmation of variations by sequencing.     

Homo- and heterotypic fibrillin-1 and -2 interactions constitute the basis for the assembly of microfibrils

Fibrillin-1 and fibrillin-2 constitute the backbone of extracellular filaments, called microfibrils. Fibrillin assembly involves complex multistep mechanisms to result in a periodical head-to-tail alignment in microfibrils. Impaired assembly potentially plays a role in the molecular pathogenesis of genetic disorders caused by mutations in fibrillin-1 (Marfan syndrome) and fibrillin-2 (congenital contractural arachnodactyly). Presently, the basic molecular interactions involved in fibrillin assembly are obscure. Here, we have generated recombinant full-length human fibrillin-1, and two overlapping recombinant polypeptides spanning the entire human fibrillin-2 in a mammalian expression system. Characterization by gel electrophoresis, electron microscopy after rotary shadowing, and reactivity with antibodies demonstrated correct folding of these recombinant polypeptides. Analyses of homotypic and heterotypic interaction repertoires showed N- to C-terminal binding of fibrillin-1, and of fibrillin-1 with fibrillin-2. The interactions were of high affinity with dissociation constants in the low nanomolar range. However, the N- and C-terminal fibrillin-2 polypeptides did not interact with each other. These results demonstrate that fibrillins can directly interact in an N- to C-terminal fashion to form homotypic fibrillin-1 or heterotypic fibrillin-1/fibrillin-2 microfibrils. This conclusion was further strengthened by double immunofluorescence labeling of microfibrils. In addition, the binding epitopes as well as the entire fibrillin molecules displayed very stable properties.     

Calcification properties of saline-filled breast implants

Three patients requested explantation of their saline-filled breast implants. Bilateral calcification had occurred in all six implants. Four of the implants were manufactured by McGhan Corporation (Santa Barbara, Calif.), and two, by the Simaplast Company (Toulon, France). All implants had been inserted in the subglandular plane and had been in place for 7 to 23 years. At the time of explantation, patients were 32, 34, and 44 years old. Calcification on the surface of the implants and capsules was analyzed. Implant surface calcification was clinically evident on all six implants, appearing as ivory-colored, tenaciously adherent deposits, only on the anterior surface of the implant. Capsular calcification, which was observed only microscopically, was characterized by poorly organized, irregularly shaped, calcified agglomerates; this calcification also occurred only on the anterior surface of the capsule, adjacent to the area of calcification on the implant. Ultrastructural analysis of scrapings from the implant surface showed large, electron-dense aggregates of crystals, with individual crystals measuring approximately 40 x 10 x 10 nm. In contrast, capsular calcification was characterized by two patterns of deposition, spherulitic aggregates of needle-shaped crystals and areas of metaplastic bone. The individual crystals were approximately 40 x 10 x 10 nm. Energy-dispersive x-ray spectroscopy of specimens from the areas of calcification on the implant and capsule surfaces demonstrated calcium and phosphorus. Electron diffraction of crystals from the implant and capsule surfaces demonstrated the D-spacings characteristic of calcium apatite. There were many differences between the calcification properties of these six saline implants and those of silicone gel implants. For example, mineralization has not been observed on the surface of gel implants, but in these saline implants it occurred primarily on the implant surface. Also, capsular calcification has been observed clinically in gel implants across the surface of the capsule (except at the site of attachment of a Dacron patch), but in this study it was observed only microscopically and was located on the anterior surface of the capsule, adjacent to the area of calcification on the implant. In addition, crystals 100 times larger than those observed on the six saline implant capsules have been observed on the surface of gel implant capsules. A model is presented to explain the mechanism of calcification associated with breast implants and to explain the observed differences between saline-filled and gel-filled implants.     

Life-Cycle Assessment of Biosolids Processing Options

Biosolids, also known as sewage sludge, are reusable organic materials separated from sewage during treatment. They can be managed in a variety of ways. Different options for biosolids handling in Sydney, Australia, are compared in this study using life-cycle assessment. Two key comparisons are made: of system scenarios (scenario 1 is local dewatering and lime amendment; scenario 2 is a centralized drying system) and of technologies (thermal drying versus lime amendment). The environmental issues addressed are energy consumption, global warming potential (GWP), and human toxicity potential (HTP).
Scenario 2 would consume 24% more energy than scenario 1. This is due to the additional electricity for pumping and particularly the petrochemical methane that supplements biogas in the drier. A centralized system using the same technologies as scenario 1 has approximately the same impacts. The GWP and HTP of the different scenarios do not differ significantly.
The assessment of technology choices shows significant differences. The ample supply of endogenous biogas at North Head sewage treatment plant for the drying option allows reductions, relative to the lime-amendment option, of 68% in energy consumption, 45% in GWP, and 23% in HTP.
Technology choices have more significant influence on the environmental profile of biosolids processing than does the choice of system configurations. Controlling variables for environmental improvement are the selection of biogas fuel, avoidance of coalsourced electrical energy, minimization of trucking distances, and raising the solids content of biosolids products.