QTL mapping of domestication and diversifying selection related traits in round-fruited semi-wild Xishuangbanna cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L. var. <Emphasis Type="Italic">xishuangbannanesis</Emphasis>)

Key message

QTL analysis revealed 11 QTL underlying flowering time and fruit size variation in the semi-wild Xishuangbanna cucumber, of which, FT6.2 and FS5.2 played the most important roles in determining photoperiod-dependent flowering time and round-fruit shape, respectively.

Abstract

Flowering time and fruit size are two important traits in domestication and diversifying selection in cucumber, but their genetic basis is not well understood. Here we reported QTL mapping results on flowering time and fruit size with F₂ and F_2:3 segregating populations derived from the cross between WI7200, a small fruited, early flowering primitive cultivated cucumber and WI7167, a round-fruited, later flowering semi-wild Xishuangbanna (XIS) cucumber. A linkage map with 267 microsatellite marker loci was developed with 138 F₂ plants. Phenotypic data of male and female flowering time, fruit length and diameter and three other traits (mature fruit weight and number, and seedling hypocotyl length) were collected in multiple environments. Three flowering time QTL, FT1.1, FT5.1 and FT6.2 were identified, in which FT6.2 played the most important role in conferring less photoperiod sensitive early flowering during domestication whereas FT1.1 seemed more influential in regulating flowering time within the cultivated cucumber. Eight consensus fruit size QTL distributed in 7 chromosomes were detected, each of which contributed to both longitudinal and radial growth in cucumber fruit development. Among them, FS5.2 on chromosome 5 exhibited the largest effect on the determination of round fruit shape that was characteristic of the WI7167 XIS cucumber. Possible roles of these flowering time and fruit size QTL in domestication of cucumber and crop evolution of the semi-wild XIS cucumber, as well as the genetic basis of round fruit shape in cucumber are discussed.

     

PTP1B inhibitors: synthesis and evaluation of difluoro-methylenephosphonate bioisosteres on a sulfonamide scaffold

We have synthesized and evaluated a series of triaryl sulfonamide-based PTP1B inhibitors in which a difluoro-methylenephosphonate group of a potent lead has been replaced by potential bioisosteric replacements. Several mono- or di-charged compounds (8a, 8b, and 15a) were shown exhibit inhibitory activity in the low micromolar range, demonstrating the feasibility of using this approach in identifying non-phosphonate pTyr mimetics in a small molecular scaffold. These results also provide a useful indication of the relative effectiveness of these pTyr mimetics.     

All-trans retinoic acid prevents development of cardiac remodeling in aortic banded rats by inhibiting the renin-angiotensin system

This study was designed to determine the effect of all-trans retinoic acid (RA) on the development of cardiac remodeling in a pressure overload rat model. Male Sprague-Dawley rats were subjected to sham operation and the aortic constriction procedure. A subgroup of sham control and aortic constricted rats were treated with RA for 5 mo after surgery. Pressure-overloaded rats showed significantly increased interstitial and perivascular fibrosis, heart weight-to-body weight ratio, and gene expression of atrial natriuretic peptide and brain natriuretic peptide. Echocardiographic analysis showed that pressure overload induced systolic and diastolic dysfunction, as evidenced by decreased fractional shortening, ejection fraction, stroke volume, and increased E-to-E(a) ratio and isovolumic relaxation time. RA treatment prevented the above changes in cardiac structure and function and hypertrophic gene expression in pressure-overloaded rats. RA restored the ratio of Bcl-2 to Bax, inhibited cleavage of caspase-3 and -9, and prevented the decreases in the levels of SOD-1 and SOD-2. Pressure overload-induced phosphorylation of ERK1/2, JNK, and p38 was inhibited by RA, via upregulation of mitogen-activated protein kinase phosphatase (MKP)-1 and MKP-2. The pressure overload-induced production of angiotensin II was inhibited by RA via upregulation of expression of angiotensin-converting enzyme (ACE)2 and through inhibition of the expression of cardiac and renal renin, angiotensinogen, ACE, and angiotensin type 1 receptor. Similar results were observed in cultured neonatal cardiomyocytes in response to static stretch. These results demonstrate that RA has a significant inhibitory effect on pressure overload-induced cardiac remodeling, through inhibition of the expression of renin-angiotensin system components.     

小麦高分子量麦谷蛋白亚基的 SDS-PAGE方法

小麦高分子量麦谷蛋白亚基(HMW-GS)与小麦面粉的加工品质密切相关,SDS-PAGE是其常用分离方法。在前人工作的基础上摸索了一套适于分析HMW-GS的SDS-PAGE方法,具有简便、快速、微量、不影响种子萌发出苗、分辨率好、制成干板清晰、不皱缩、易保存等优点,以供有关工作者参考。     

CircKIF2A contributes to cell proliferation,migration, invasion and glycolysis in human neuroblastoma by regulating miR-129-5p/PLK4 axis

Molecular and Cellular Biochemistry - Multiple circular RNAs (circRNAs) have been identified to act as essential mediators in diverse human cancers. However, the roles of circRNAs in neuroblastoma...     

A Novel Golgi Retention Signal RPWS for Tumor Suppressor UBIAD1

UBIAD1 plays critical roles in physiology including vitamin K and CoQ10 biosynthesis as well as pathophysiology including dyslipimedia-induced SCD (Schnyder’s corneal dystrophy), Parkinson’s disease, cardiovascular disease and bladder carcinoma. Since the subcellular localization of UBIAD1 varies in different cell types, characterization of the exact subcellular localization of UBIAD1 in specific human disease is vital for understanding its molecular mechanism. As UBIAD1 suppresses bladder carcinoma, we studied its subcellular localization in human bladder carcinoma cell line T24. Since fluorescent images of UBIAD1-EGFP in T24, human prostate cancer cell line PC-3, human embryonic kidney cell line HEK293 and human hepatocyte cell line L02 are similar, these four cell lines were used for present study. Using a combination of fluorescent microscopy and immunohistochemistry, it was found that UBIAD1 localized on the Golgi and endoplasmic reticulum (ER), but not on the plasma membrane, of T24 and HEK293 cells. Using scanning electron microscopy and western blot analysis, we found that UBIAD1 is enriched in the Golgi fraction extracted from the L02 cells, verifying the Golgi localization of UBAID1. Site-directed mutagenesis showed that the RPWS motif, which forms an Arginine finger on the UBIAD1 N terminus, serves as the Golgi retention signal. With both cycloheximide and brefeldin A inhibition assays, it was shown that UBIAD1 may be transported from the endoplasmic reticulum (ER) to the Golgi by a COPII-mediated mechanism. Based upon flow cytometry analysis, it is shown that mutation of the RPWS motif reduced the UBIAD1-induced apoptosis of T24 cells, indicating that the proper Golgi localization of UBIAD1 influences its tumor suppressant activity. This study paves the way for further understanding the molecular mechanism of UBIAD1 in human diseases.     

CD4 binding partially locks the bridging sheet in gp120 but leaves the beta2/3 strands flexible

The structure of the free form HIV gp120, critical for therapeutic agent development, is unavailable due to its high flexibility. Previous thermodynamic data, structural analysis and simulation results have suggested a large conformational change in the core domain upon CD4 binding. The bridging sheet, which consists of four beta-strands with beta20/21 nestling against the inner/outer domains and beta2/3 facing outward, more exposed to the solvent, was proposed to be unfolded in the native state. In order to test this proposition and to characterize the native conformations, we performed potential mean force (PMF) molecular dynamics (MD) simulations on the CD4-bound crystal structure. We pushed the bridging sheet away from the inner and outer domain to explore the accessible conformational space for the bridging sheet. In addition, we performed conventional MD simulations on structures with the bridging sheet partially unfolded to investigate the stability of the association between the inner and outer domains. Based on the free energy profiles, we find that the whole bridging sheet is unlikely to unfold without other concurrent conformational changes. On the other hand, the partial bridging sheet, beta strands 2/3, can switch its conformation from the folded to the unfolded state. Furthermore, relaxation of conformation with partially unfolded bridging sheet through MD simulations leads to a conformation with beta strands 20/21 quickly re-anchoring against the inner and outer domains. Such a conformation, although lacking some of the hydrophobic interactions present in the CD4-bound structure, displayed high stability as further indicated by other restrained MD simulations. The relevance of this conformation to the free form structure and the pathway for conformational change from the free form to the CD4-bound structure is discussed in detail in light of the available unliganded SIV gp120 crystal structure.     

Use of pressurized liquid extraction (PLE)/gas chromatography-electron capture detection (GC-ECD) for the determination of biodegradation intermediates of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in soils

A rapid, sensitive, and reproducible method was developed for quantitative determination of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and its biodegradation intermediates, hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX), hexahydro-1,3-dinitroso-5-nitro-1,3,5-triazine (DNX), and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX) in soils. RDX, MNX, DNX, or TNX was extracted from soil by pressurized liquid extraction (PLE), followed by cleanup using florisil. Instrumental analysis was performed using gas chromatography with electron capture detection (GC-ECD), which was highly sensitive to the parent explosive and its metabolites. The method detection limits (MDLs) were 0.243, 0.095, 0.138, and 0.057 ng/g for RDX, MNX, DNX, and TNX, respectively. The method gave high recovery (98-102%), good precision (0.22-5.14%), and reproducibility, and proved to be suitable for real world sample analysis.     

Interface Welding via Thermal Pulse Sintering to Enable 4.6 V Solid-State Batteries

NASICON-type Li_1.3Al_0.3Ti_1.7(PO4)₃ (LATP) is one of the most promising solid-state electrolytes (SSEs) to achieve high-energy-density solid-state batteries (SSBs) due to its high ionic conductivity, high-voltage stability, and low cost. However, its practical application is constrained by inadequate interfacial compatibility with cathode materials and significant incompatibility with lithium metal. In this work, a cost-effective interface welding approach is reported, utilizing an innovative thermal pulse sintering (TPS) to fabricate LATP-based solid-state batteries. Initially, the rapid thermal pulses enhance the ionic conductivity of LATP SSE by inducing selective growth of LATP nanowires, effectively occupying interparticle voids. Additionally, this process results in the formation of a dense layer (GCM) comprising graphene oxide, carbon nanotubes, and MXene with a controlled Li⁺ transport pathway, facilitating lithium stripping and plating processes. Moreover, these thermal pulses facilitate the interfacial fusion between LATP and cathode materials, while avoiding undesired phase diffusion. As a result, SSBs with a LiCoO₂ cathode deliver favorable cycle stability at 4.6 V, marking significant progress. This facile interface welding strategy represents a substantial step toward high-energy-density SSB development.