Initiation, long-term cryopreservation, and recovery of Abies alba Mill. embryogenic cell lines

Somatic embryogenesis of Abies alba (Mill.) has significant potential to become an effective method for vegetative propagation of this species. To induce somatic embryogenesis in A. alba, the influence of the mother tree, sampling dates, and cold treatment storage of cones were examined. The initiation frequencies ranged from 1.7% to 16.6%. The sampling date and cone storage, but not the mother tree, had a significant effect on the initiation of embryogenic cultures. Storage of embryogenic cell lines was tested through cryopreservation for 6 yr. Four out of 12 cryostored embryogenic cell lines recovered, and the regeneration of cotyledonary embryos was obtained with two cell lines. The ability of embryogenic cell masses to produce somatic embryos and the mean number of cotyledonary embryos were higher when the maturation protocol was based on embryogenic suspensions dispersed on filter paper. The properly developed germinants were obtained only from maturation media where 32 μM abscisic acid was used, being 16.2% when polyethylene glycol (PEG) was not present and 1.8% when supplemented with 10% (w/v) PEG, respectively. The present study provides evidence that it is possible to cryopreserve A. alba embryogenic cultures while maintaining their maturing ability for the lengthy period (6 yr) needed for progeny testing of field-grown trees. Therefore, our findings are important for further studies and advanced breeding work of the species; however, the conversion of germinants into ex vitro conditions still remains a significant challenge.     

The Fat Mass and Obesity-Associated (FTO) Gene is Associated with Intramuscular Fat Content and Growth Rate in the Pig

The association of the FTO gene with obesity has been implicated in various human populations. The FTO gene is also most likely involved in the regulation of energy balance and feed intake. Here, the FTO gene was studied as a candidate gene for fatness and growth rate traits in pigs. The amino acid sequence of the FTO gene showed high conservation among human, pig, and other important domestic animals. Twelve variants including ten SNPs and two indels were detected, and then five SNPs within different genomic regions were genotyped in the ISU Berkshire × Yorkshire pig resource family. The linkage disequilibrium analyses revealed that most of these FTO variants were not in strong LD with each other. The SNPs c.46–139A > T within intron 1 and a synonymous mutation c.594C > G (Ala198Ala) within exon 3 had significant (P < 0.01) associations with average daily gain on test and total lipid percentage in muscle, respectively. Five major haplotypes were identified and the subsequent association analyses suggested that haplotype 2 (-CTTGG-) was the most favorable for increased growth rate, while haplotype 1 (-CTACG-) was unfavorably associated with intramuscular fatness traits.     

Conversion of Soybean Oil to Biodiesel Fuel Using Lipozyme TL IM in a Solvent-free Medium

The conversion of soybean oil to biodiesel fuel was investigated in the presence of a lipase from Thermomyces lanuginosus (commercially called Lipozyme TL IM) in a solvent-free medium. The lipase was inactivated when more than 1.5 molar equivalent of methanol was added to the oil mixture. To fully convert the oil to its corresponding methyl esters, the reaction was performed successfully by a three-step addition of 1 molar equivalent of methanol and under the optimized conditions (40°C, 150 rpm, 10% enzyme quantity based on oil weight), the maximum methyl ester (ME) yield was 98% after 12 h reaction. By-product glycerol had a negative effect on enzymatic activity and iso-propanol was found to be effective for glycerol removal, in the presence of which lipase expressed relatively high activity and more than 94% of the ME yield was maintained after being used repeatedly for 15 batches.     

Chinese plasma-derived products supply under the lot release management system in 2007–2011

In 2007, the Chinese State Food and Drug Administration (SFDA) implemented a management system for lot release of all plasma-derived products. Since then, there have been only a few systematic studies of the blood supply, which is a concern when considering the small amount of plasma collected per capita (approximately 3 L/1000 people). As a result, there may be a threat to the safety of the available blood supply. In this study, we examined the characteristics of the supply of Chinese plasma-derived products. We investigated the reports of lot-released biological products derived from all 8 national or regional regulatory authorities in China from 2007 to 2011. The market supply characteristics of Chinese plasma-derived products were analyzed by reviewing the changes in supply varieties, the batches of lot-released plasma-derived products and the actual supply. As a result, the national regulatory authorities can more accurately develop a specific understanding of the production and quality management information provided by Chinese plasma product manufacturers. The implementation of the lot release system further ensures the clinical validity of the plasma-derived products in China and improves the safety of using plasma-derived products. This work provides an assessment of the future Chinese market supply of plasma-derived products and can function as a theoretical basis for the establishment of hemovigilance.     

Sensitivity of Prestaining RNA with Ethidium Bromide Before Electrophoresis and Performance of Subsequent Northern Blots Using Heterologous DNA Probes

Adding ethidium bromide (EtBr) at low concentrations to RNA samples before running formaldehyde–agarose gels affords the advantages of checking RNA integrity and evaluating the quality of size-separation at any time during electrophoresis or immediately after either electrophoresis or blotted the separated RNA onto the membrane without significantly compromising mobility, transfer, or hybridization. In this study, we systematically examined the factors that affect the sensitivity of RNA prestaining by heating RNA samples that include EtBr before electrophoresis under different denaturation conditions. We also examined the efficiency of the hybridization of EtBr-prestained RNA with heterologous DNA probes. The results showed that the fluorescent intensity of EtBr-prestained RNA was affected not only by the EtBr concentration as previously reported but also by the RNA amount, denaturation time, and denaturation temperature. Prior staining of RNA with 40 μg/mL EtBr significantly decreased the efficiency of Northern blot hybridization with heterologous DNA probes. We propose that to best combine staining sensitivity and the efficiency of Northern blot hybridization with heterologous DNA probes, the concentration of EtBr used to prestain RNA should not exceed 30 μg/mL. The efficiency of the hybridization of EtBr-prestained RNA was affected not only by factors that affect staining sensitivity but also by the type of probe used.     

Emission and Control Characteristics for Incineration of Sedum Plumbizincicola Biomass in a Laboratory-Scale Entrained Flow Tube Furnace

Experiments were conducted to investigate and control pollutant emission from incineration of Sedum plumbizincicola plants on a laboratory scale using an entrained flow tube furnace. Without control technologies, the flue gas contained 0.101 mg Nm^?3 of Cd, 46.4 mg Nm^?3 of Zn, 553 mg Nm^?3 of NOx, 131 pg Nm^?3 of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/Fs) and 35.4 mg Nm^?3 of polycyclic aromatic hydrocarbons (PAHs). In pollutants control experiments. Al₂O₃, CaO, and kaolin were compared as adsorbents and activated carbon was used as an end-of-pipe method for the capture of pollutants. Kaolin, the most effective of the three adsorbents, removed 91.2% of the Cd in flue gas. While 97.6% of the Cd and 99.6% of the PAHs were removed by activated carbon. Incineration may therefore be regarded as a viable option for the safe disposal of the biomass of the zinc and cadmium hyperaccumulator species S. plumbizincicola.     

Large enhancement of oscillating chemiluminescence with [Ru(bpy)3]2+‐catalyzed Belousov–Zhabotinsky reaction in the presence of tri‐n‐propylamine

Oscillating chemiluminescence enhanced by the addition of tri‐n‐propylamine (TPrA) to the typical Belousov–Zhabotinsky (BZ) reaction system catalyzed by ruthenium(II)tris(2.2'‐bipyridine)(Ru(bpy)₃²⁺) was investigated using a luminometry method. The [Ru(bpy)₃]²⁺/TPrA system was first used as the catalyst for a BZ oscillator in a closed system, which exhibited a shorter induction period, higher amplitude and much more stable chemiluminescence (CL) oscillation. The effects of various concentrations of TPrA, oxygen and nitrogen flow rate on the oscillating behavior of this system were examined. In addition, the CL intensity of the [Ru(bpy)₃]²⁺/TPrA–BZ system was found to be inhibited by phenol, thus providing a way for use of the BZ system in the determination of phenolic compounds. Moreover, the possible mechanism of the oscillating CL reaction catalyzed by [Ru(bpy)₃]²⁺/TPrA and the inhibition effects of oxygen and phenol on this oscillating CL system were considered. Copyright © 2012 John Wiley & Sons, Ltd.     

Genetic and physical fine mapping of a multilocular gene Bjln1 in Brassica juncea to a 208-kb region

Most of the germplasm resources in Brassica juncea produce silique with only two locules, whereas a few varieties can produce silique with three or four locules. The increase in locule number in B. juncea has been shown to cause an increase in the number of seeds per silique, resulting in an increase in the yield per plant. Thus, the development of high-locule-number varieties may be an effective way of improving the yield of B. juncea. Duoshi, a B. juncea landrace originating from the Qinghai–Tibetan plateau, produces silique with 3–4 locules. Genetic analysis has shown that the high-locule-number trait in Duoshi is determined by two recessive genes, tentatively designated as Bjln1 and Bjln2. For fine mapping of the Bjln1 gene, a BC3 population was developed from the cross between Duoshi (multilocular parent) and Xinjie (bilocular parent). Using a combination of amplified fragment length polymorphism (AFLP) and bulked segregant analysis, only two AFLP markers linked to Bjln1 were identified. Preliminary linkage analysis showed that the two AFLP markers were located on the same side of Bjln1. Blast analysis revealed that the sequences of the two AFLP markers had homologues on Scaffold000019 at the bottom of B. rapa A7. Using the results of linkage analysis and BlastN searches, simple sequence repeat (SSR) markers were subsequently developed based on the sequence information from B. rapa A7. Seven SSR markers were eventually identified, of which ln 8 was co-segregated with Bjln1. ln 7 and ln 9, the closest flanking markers, were mapped at 2.0 and 0.4 cM distant from the Bjln1 gene, respectively. The SSR markers were cloned, sequenced and mapped on A7 of B. rapa (corresponding to J7 in the A genome of B. juncea). The two closest flanking markers, ln 7 and ln 9, were mapped within a 208-kb genomic region on B. rapa A7, in which the Bjln1 gene might be included. The present study may facilitate cloning of the Bjln1 gene as well as the selection process for developing multilocular varieties in B. juncea by marker-assisted selection and genetic engineering.