Lethal mutagenesis and evolutionary epidemiology

The lethal mutagenesis hypothesis states that within-host populations of pathogens can be driven to extinction when the load of deleterious mutations is artificially increased with a mutagen, and becomes too high for the population to be maintained. Although chemical mutagens have been shown to lead to important reductions in viral titres for a wide variety of RNA viruses, the theoretical underpinnings of this process are still not clearly established. A few recent models sought to describe lethal mutagenesis but they often relied on restrictive assumptions. We extend this earlier work in two novel directions. First, we derive the dynamics of the genetic load in a multivariate Gaussian fitness landscape akin to classical quantitative genetics models. This fitness landscape yields a continuous distribution of mutation effects on fitness, ranging from deleterious to beneficial (i.e. compensatory) mutations. We also include an additional class of lethal mutations. Second, we couple this evolutionary model with an epidemiological model accounting for the within-host dynamics of the pathogen. We derive the epidemiological and evolutionary equilibrium of the system. At this equilibrium, the density of the pathogen is expected to decrease linearly with the genomic mutation rate U. We also provide a simple expression for the critical mutation rate leading to extinction. Stochastic simulations show that these predictions are accurate for a broad range of parameter values. As they depend on a small set of measurable epidemiological and evolutionary parameters, we used available information on several viruses to make quantitative and testable predictions on critical mutation rates. In the light of this model, we discuss the feasibility of lethal mutagenesis as an efficient therapeutic strategy.     

Using anticipatory life cycle assessment to enable future sustainable construction

The built environment is the largest single emitter of CO₂ and an important consumer of energy. Much research has gone into the improved efficiency of building operation and construction products. Life Cycle Assessment (LCA) is commonly used to assess existing buildings or building products. Classic LCA, however, is not suited for evaluating the environmental performance of developing technologies. A new approach, anticipatory LCA (a‐LCA), promises various advantages and can be used as a design constraint during the product development stage. It helps overcome four challenges: (i) data availability, (ii) stakeholder inclusion, (iii) risk assessment, and (iv) multi‐criteria problems. This article's contribution to the line of research is twofold: first, it adapts the a‐LCA approach for construction‐specific purposes in theoretical terms for the four challenges. Second, it applies the method to an innovative prefabricated modular envelope system, the CleanTechBlock (CTB), focusing on challenge (i). Thirty‐six CTB designs are tested and compared to conventional walls. Inclusion of technology foresight is achieved through structured scenario analysis. Moreover, challenge (iv) is tackled through the analysis of different environmental impact categories, transport‐related impacts, and thickness of the wall assemblies of the CTB. The case study results show that optimized material choice and product design is needed to reach the lowest environmental impact. Methodological findings highlight the importance of context‐specific solutions and the need for benchmarking new products.     

Lifting the veil on the correction of double counting incidents in hybrid life cycle assessment

Life cycle assessment (LCA) and environmentally extended input–output analyses (EEIOA) are two techniques commonly used to assess environmental impacts of an activity/product. Their strengths and weaknesses are complementary, and they are thus regularly combined to obtain hybrid LCAs. A number of approaches in hybrid LCA exist, which leads to different results. One of the differences is the method used to ensure that mixed LCA and EEIOA data do not overlap, which is referred to as correction for double counting. This aspect of hybrid LCA is often ignored in reports of hybrid assessments and no comprehensive study has been carried out on it. This article strives to list, compare, and analyze the different existing methods for the correction of double counting. We first harmonize the definitions of the existing correction methods and express them in a common notation, before introducing a streamlined variant. We then compare their respective assumptions and limitations. We discuss the loss of specific information regarding the studied activity/product and the loss of coherent financial representation caused by some of the correction methods. This analysis clarifies which techniques are most applicable to different tasks, from hybridizing individual LCA processes to integrating complete databases. We finally conclude by giving recommendations for future hybrid analyses.     

Sampling strategy optimization to increase statistical power in landscape genomics: A simulation‐based approach

An increasing number of studies are using landscape genomics to investigate local adaptation in wild and domestic populations. Implementation of this approach requires the sampling phase to consider the complexity of environmental settings and the burden of logistical constraints. These important aspects are often underestimated in the literature dedicated to sampling strategies. In this study, we computed simulated genomic data sets to run against actual environmental data in order to trial landscape genomics experiments under distinct sampling strategies. These strategies differed by design approach (to enhance environmental and/or geographical representativeness at study sites), number of sampling locations and sample sizes. We then evaluated how these elements affected statistical performances (power and false discoveries) under two antithetical demographic scenarios. Our results highlight the importance of selecting an appropriate sample size, which should be modified based on the demographic characteristics of the studied population. For species with limited dispersal, sample sizes above 200 units are generally sufficient to detect most adaptive signals, while in random mating populations this threshold should be increased to 400 units. Furthermore, we describe a design approach that maximizes both environmental and geographical representativeness of sampling sites and show how it systematically outperforms random or regular sampling schemes. Finally, we show that although having more sampling locations (between 40 and 50 sites) increase statistical power and reduce false discovery rate, similar results can be achieved with a moderate number of sites (20 sites). Overall, this study provides valuable guidelines for optimizing sampling strategies for landscape genomics experiments.     

Contrasted histories of organelle and nuclear genomes underlying physiological diversification in a grass species

C₄ photosynthesis evolved multiple times independently in angiosperms, but most origins are relatively old so that the early events linked to photosynthetic diversification are blurred. The grass Alloteropsis semialata is an exception, as this species encompasses C₄ and non-C₄ populations. Using phylogenomics and population genomics, we infer the history of dispersal and secondary gene flow before, during and after photosynthetic divergence in A. semialata. We further analyse the genome composition of individuals with varied ploidy levels to establish the origins of polyploids in this species. Detailed organelle phylogenies indicate limited seed dispersal within the mountainous region of origin and the emergence of a C₄ lineage after dispersal to warmer areas of lower elevation. Nuclear genome analyses highlight repeated secondary gene flow. In particular, the nuclear genome associated with the C₄ phenotype was swept into a distantly related maternal lineage probably via unidirectional pollen flow. Multiple intraspecific allopolyploidy events mediated additional secondary genetic exchanges between photosynthetic types. Overall, our results show that limited dispersal and isolation allowed lineage divergence, with photosynthetic innovation happening after migration to new environments, and pollen-mediated gene flow led to the rapid spread of the derived C₄ physiology away from its region of origin.     

Paternity tests support a diallelic self‐incompatibility system in a wild olive (Olea europaea subsp. laperrinei,Oleaceae)

Self‐incompatibility (SI) is the main mechanism that favors outcrossing in plants. By limiting compatible matings, SI interferes in fruit production and breeding of new cultivars. In the Oleeae tribe (Oleaceae), an unusual diallelic SI system (DSI) has been proposed for three distantly related species including the olive (Olea europaea), but empirical evidence has remained controversial for this latter. The olive domestication is a complex process with multiple origins. As a consequence, the mixing of S‐alleles from two distinct taxa, the possible artificial selection of self‐compatible mutants and the large phenological variation of blooming may constitute obstacles for deciphering SI in olive. Here, we investigate cross‐genotype compatibilities in the Saharan wild olive (O. e. subsp. laperrinei). As this taxon was geographically isolated for thousands of years, SI should not be affected by human selection. A population of 37 mature individuals maintained in a collection was investigated. Several embryos per mother were genotyped with microsatellites in order to identify compatible fathers that contributed to fertilization. While the pollination was limited by distance inside the collection, our results strongly support the DSI hypothesis, and all individuals were assigned to two incompatibility groups (G1 and G2). No self‐fertilization was observed in our conditions. In contrast, crosses between full or half siblings were frequent (ca. 45%), which is likely due to a nonrandom assortment of related trees in the collection. Finally, implications of our results for orchard management and the conservation of olive genetic resources are discussed.     

Manganese (hyper)accumulation within Australian Denhamia (Celastraceae): an assessment of the trait and manganese accumulation under controlled conditions

Plant and Soil - The genus Denhamia(Celastraceae) includes fifteen Australian species, many of which have a propensity for manganese (Mn) (hyper)accumulation. Among the key aims of this study were...     

First partial cranium of Togocetus from Kpogamé (Togo) and the protocetid diversity in the Togolese phosphate basin

Earliest cetaceans (whales) originated from the early Eocene of Indo-Pakistan, but the group dispersed through most of the oceans of the planet by the late middle to late Eocene. This late Eocene global distribution indicates that important dispersal events took place during the middle Eocene (Lutetian), a globally undersampled time interval that is well documented in the Togolese phosphate series. We report here the first discovery of a partial cetacean cranium from middle Eocene deposits of Togo (West Africa). A 3D model of the cranium and teeth was reconstructed in order to reveal hidden anatomical features. The dental and cranial characteristics of the Togolese specimen recall those of protocetid taxa described in Africa, Asia, and North America, but also display significant differences. In particular, we show that the new specimen shares a number of morphological features with the Togolese taxon Togocetus. Such a hypothesis is further supported by a cladistic analysis including 45 taxa and 167 morphological characters, which recovers the new specimen close to Togocetus as the first offshoot of protocetids. Phylogenetic analysis including all the protocetids remains of Kpogamé confirms the singular diversity of the Togolese phosphate basin, and enables to examine potential connections with faunas from contemporaneous localities in Africa.     

Ring‐opening of azetidiniums by nucleophiles. Synthesis of polysubstituted linear amines

This microreview focuses on the nucleophilic ring‐opening of azetidiniums presenting various substitution patterns at C2, C3, and C4. In most cases, the nucleophilic ring‐opening occurred in a stereoselective and regioselective fashion producing functionalized linear amines. Experimental selectivities associated with Density Functional Theory (DFT) calculations have allowed a better understanding of the parameters governing the regioselectivities.