Molecular Evolution of the Telomere-Associated Mal Loci of Saccharomyces

The MAL gene family of Saccharomyces consists of five multigene complexes (MAL1, MAL2, MAL3, MAL4, and MAL6) each of which encodes maltose permease (GENE 1), maltase (GENE 2) and the trans-acting MAL-activator (GENE 3). Four of these loci have been mapped and each is located at or near the telomere of a different chromosome. We compare the physical structure of the MAL loci and their flanking sequences. The MAL loci were shown to be both structurally and functionally homologous throughout an approximately 9.0-kb region. The orientation of the MAL loci was determined to be: CENTROMERE . . . GENE 3-GENE 1-GENE 2 . . . TELOMERE. Telomere-adjacent sequences were found flanking GENE 2 of the MAL1, MAL3 and MAL6 loci. No common repeated elements were found on the centromere-proximal side of all the MAL1, loci. These results suggest that, during the evolution of this polygenic family, the MAL loci translocated to different chromosomes via a mechanism that involved the rearrangement(s) of chromosome termini.     

Structure and function of hemoglobin in antarctic fishes and evolutionary implications

Summary The hematological features of cold-adapted, red-blooded Antarctic teleosts has prompted this study on the relationship between hemoglobin molecular structure and oxygen-binding properties. The hemolysates from 21 species of 5 families contained one component (Hb 1), often accompanied by an additional, minor one (Hb 2, 5%–10% of total). On the other hand, 3 species of Zoarcidae, a non-endemic family, had 4–5 components. All purified hemoglobins from the former group, but only 1–2 of the 4–5 hemoglobins of Zoarcidae, showed a strong Root effect (pH regulation of oxygen binding). Globins from each hemoglobin have been purified and characterised with respect to molecular structure in several species. The similarity between the complete amino acid sequence of one -chain and those of non-Antarctic -chains is lower than that among the latter sequences, suggesting independent pathways of evolution.Presented at the 5th SCAR Symposium on Antarctic Biology, Hobart, Australia (August 29th-September 3rd, 1988)     

Noninvasive determination of ulnar stiffness from mechanical response--in vivo comparison of stiffness and bone mineral content in humans

An approach referred to as Mechanical Response Tissue Analysis (MRTA) has been developed for the noninvasive determination of mechanical properties of the constituents of the intact limb. Of specific interest in the present study is the bending stiffness of the ulna. The point mechanical impedance properties in the low frequency regime, between 60 and 1,600 Hz are used. The procedure requires a proper design of the probe for good contact of the skin at midshaft and proper support of the proximal and distal ends of the forearm to obtain an approximation to "simple support" of the ulna. A seven-parameter model for the mechanical response is then valid, which includes the first mode of anterior-posterior beam bending of the ulna, the damping and spring effect of the soft tissue between probe and bone, and the damping of musculature. A dynamic analyzer (HP3562A) provides in seconds the impedance curve and the pole-zero curve fit. The physical parameters are obtained from a closed-form solution in terms of the curve-fit parameters. The procedure is automated and is robust and analytically reliable at about the five percent level. Some 80 human subjects have been evaluated by this mechanical response system and by the Norland single photon absorptiometer, providing for the first time in vivo, a comparison of elastic bending stiffness (ulna) and bone mineral content (radius). Three functional parameters of potential clinical value are the cross-sectional bending stiffness EI, the axial load capability Pcr (Euler buckling load) and the bone "sufficiency" S, defined as the ratio of Pcr to body weight. The correlation between EI and bone mineral (r = 0.81) is only slightly less than previous in vitro results with both measurements on the same bone (r = 0.89). When sufficiency is taken into consideration, the correlation of Pcr and bone mineral content is improved (r = 0.89). An implication is that "quality" of bone is a factor which is not indicated by bone mineral content but which is indicated by stiffness. Bone mineral is necessary for proper stiffness but not sufficient. Therefore mechanical measurement should provide a new dimension to be used toward a better understanding of the factors related to bone health and disease.     

Calmodulin Acts as an intermediary for the effects of calcium on gap junctions from crayfish lateral axons

Summary Lateral axons from the abdominal nerve cord of cray-fish were internally perfused with the calcium receptor calmodulin (CaM) in solutions with low (pCa>7.0) or high (pCa 5.5) calcium concentrations and studied electrophysiologically and morphologically. Results from these experiments show that when the internal solution contains calcium-activated calmodulin (Ca²⁺-CaM) the junctional resistance between the axons increases from control values of about 60 to 500–600 k in 60 min. In contrast, axons perfused with calmodulin in low calcium solutions maintain their junctional resistance at control levels during the 60-min perfusion. Similar results are obtained when only one or both coupled axons are perfused.The morphological study shows that in the perfused axons the axoplasmic organelles are replaced or grossly perturbed by the perfusion solution up to the region of the synapses. Additionally, in axons perfused with Ca²⁺-CaM there are regions where the synaptic gap between the membranes decreases from a control 4–6 to 2–3 nm. Both electrophysiological and morphological results can be interpreted as indicating that calcium-activated calmodulin acts directly on the junctional channels to induce their closure.     

Rat liver lowMr phosphotyrosine protein phosphatase isoenzymes: Purification and amino acid sequences

Two lowM _r phosphotyrosine protein phosphatases have been isolated from rat liver. The enzymes were previously known as lowM _r acid phosphatases, but several recent studies have demonstrated that this family of enzymes possesses specific phosphotyrosine protein phosphatase activity. We determined the complete amino acid sequences of the two isoenzymes and named them AcP1 and AcP2. Both consist of 157 amino acid residues, are acetylated at the NH₂-terminus, and have His as the COOH-terminus. The molecular weights calculated from the sequences are 18,062 for AcP1 and 17,848 for AcP2. They are homologous except in the 40–73 zone, where about 50% of residues are different. This fact suggests that the two isoenzymes are produced by an alternative splicing mechanism. There is no homology between these two isoenzymes and the receptor-like phosphotyrosine protein phosphatases LAR, CD45, human placenta PTPase 1B, and rat brain PTPase-1. AcP1 and AcP2 are also distinct from rat liver PTPase-1 and PTPase-2, since these last enzymes have higher molecular weights. AcP1 differs from AcP2 with respect to (1) substrate affinity and (2) its sensitivity to activators and inhibitors, thus suggesting a their different physiological function.     

The primary structure and oxygen-binding properties of the single haemoglobin of the high-Antarctic fish Aethotaxis mitopteryx DeWitt

Summary The complete amino acid sequence of the single haemoglobin of the Antarctic fish Aethotaxis mitopteryx DeWitt has been established by automated repetitive Edman degradation on the intact and cleaved (enzymatically and chemically) and chains. A very high sequence identity with other Antarctic fish haemoglobins has been detected. The haemoglobin has a moderate Bohr effect and no Root effect. Organic phosphates and chloride also regulate oxygen binding only to a moderate extent. The lack of Root effect is consistent with the substitution His — Val at the HC3 C-terminal position of the chain. The low overall heat of oxygenation suggests that in this species oxygen transport is an energy-saving process, presumably related to cold adaptation. The comparative analysis of the haemoglobins of Antarctic fishes emphasises some unique features of the oxygen-transport system of A. mitopteryx, which are likely to be related to its also rather unique mode of life.Data presented here were collected during the European Polarstern Study (EPOS) sponsored by the European Science Foundation     

Molecular analysis of the avirulence gene avr9 of the fungal tomato pathogen Cladosporium fulvum fully supports the gene-for-gene hypothesis

The interaction between the fungal pathogen Cladosporium fulvum and tomato is supposed to have a gene-for-gene basis. Races of C. fulvum which have 'overcome' the resistance gene Cf9 of tomato, lack the avirulence gene avr9 which encodes a race-specific peptide elicitor. Races avirulent on tomato genotypes carrying the resistance gene Cf9 produce the race-specific peptide elicitor, which induces the hypersensitive response (HR) on those genotypes. The causal relationship between the presence of a functional avr9 gene and avirulence on tomato genotype Cf9 was demonstrated by cloning of the avr9 gene and subsequent transformation of C. fulvum. A race virulent on tomato genotype Cf9 was shown to become avirulent by transformation with the cloned avr9 gene. These results clearly demonstrate that the avr9 gene is responsible for cultivar specificity on tomato genotype Cf9 and fully support the gene-for-gene hypothesis. The avr9 gene is the first fungal avirulence gene to be cloned.     

Prochymosin expression in Bacillus subtilis

Prochymosin (PC) sequence was cloned in Bacillus subtilis using two kinds of plasmid constructions. In plasmid pSM316 the cDNA was inserted to obtain the intracellular expression of the enzyme. The enzyme turned out to be expressed in an insoluble form which could be converted to native enzyme under proper denaturing and refolding conditions. The levels of intracellular expression of PC were further enhanced by modifying the 5' region of the gene in a way that a two-cistron expression system was created. For the PC secretion, the cDNA was fused to the subtilisin leader sequence and expressed under the control of the B. subtilis neutral protease promoter. A properly folded PC was secreted by the cells, although to low levels.     

Anion-exchange high-performance liquid chromatographic analysis of inositol phosphates

The analysis of inositol phosphates by anion-exchange HPLC is described. The method employs a citrate buffer gradient to resolve several inositol phosphates including inositol 1-phosphate, inositol 1,4-bisphosphate (IP2), and inositol 1,4,5-trisphosphate (IP3), as well as some of the isomers of these compounds. Since the buffer system does not contain any phosphate, we can use a phosphate assay to examine the chromatographic behavior of phosphate-containing compounds. The method shows good resolution and recovery (greater than 95% for IP2 and IP3). Total analysis time, including reequilibration, is about 90 min. In addition, an isocratic system that can rapidly (less than 10 min) measure IP3 is described. The HPLC system was used to characterize inositol phosphate turnover in thrombin-stimulated platelets and formylmethionyl-leucyl-phenylalanine-stimulated HL-60 cells.