Analysis of intracellular ice nucleation in Xenopus oocytes by differential scanning calorimetry

Intracellular ice formation (IIF) plays a central role in cell damage during cryopreservation. We are investigating the factors which trigger IIF in Xenopus oocytes, with and without aquaporin water channels. Here, we report differential scanning calorimeter studies of Xenopus control oocytes which do not express aquaporins. Stage I to VI oocytes (which increase progressively in size) were investigated with emphasis on stage I and II because they are translucent and can also be studied under the cryomicroscope. Measurements were made in 1, 1.5, and 2M ethylene glycol (EG) in frog Ringers plus SnoMax. A multistep freezing protocol was used in which the samples were cooled until extracellular ice formation (EIF) occurred, partially remelted, slowly recooled through the EIF temperature, and then rapidly (10 degrees C/min) cooled. EIF in the 1, 1.5, and 2M EG occurred at -6.4, -7.8, and -8.9 degrees C, respectively. Freezing exotherms of individual stage I-VI oocytes were readily visible. A general trend was observed in which the IIF temperature of the early stage oocytes (I-III) was well below T(EIF) while the later stages (IV-VI) froze at temperatures much closer to T(EIF). Thus, in 1.5M EG, T(IIF) was -21.1, -25, and -26.6 degrees C in stages I-III, but was -17 and -8.5 degrees C for stage IV and V-VI. Concurrently, the percentage of oocytes in which IIF was observed fell dramatically from a high of 40 to 72% in early stages (I-III) to a low of only 7% in stage V-VI because, particularly in the later stages, IIF was hidden in the EIF exotherm. We conclude that early stage oocytes are a good model system in which to investigate modulators of IIF, but that late stage oocytes are damaged during EIF and infrequently supercool.     

The impact and control of biofouling in marine aquaculture: a review

Biofouling in marine aquaculture is a specific problem where both the target culture species and/or infrastructure are exposed to a diverse array of fouling organisms, with significant production impacts. In shellfish aquaculture the key impact is the direct fouling of stock causing physical damage, mechanical interference, biological competition and environmental modification, while infrastructure is also impacted. In contrast, the key impact in finfish aquaculture is the fouling of infrastructure which restricts water exchange, increases disease risk and causes deformation of cages and structures. Consequently, the economic costs associated with biofouling control are substantial. Conservative estimates are consistently between 5-10% of production costs (equivalent to US$ 1.5 to 3 billion yr(-1)), illustrating the need for effective mitigation methods and technologies. The control of biofouling in aquaculture is achieved through the avoidance of natural recruitment, physical removal and the use of antifoulants. However, the continued rise and expansion of the aquaculture industry and the increasingly stringent legislation for biocides in food production necessitates the development of innovative antifouling strategies. These must meet environmental, societal, and economic benchmarks while effectively preventing the settlement and growth of resilient multi-species consortia of biofouling organisms.     

Review and downscaling of life cycle decision support tools for the procurement of low-value products

Purpose

In this article, we analyze how environmental aspects can be derived from life cycle management instruments for procurement decisions of low-value products. For our analysis, we chose the case of operating room textiles. The review includes the life cycle management instruments: life cycle assessment, environmental labels, and management systems applied within the textile industry. We do so in order to identify the most important environmental decision criteria based on which the procurer of low-value products can decide for the most environmentally friendly option.

Methods

We conducted a systematic literature search in the relevant literature databases. We critically evaluate the identified life cycle assessment studies for sound methodology, verifiability, completeness, and actuality. Based on this review, we analyze and compare the results of the three most comprehensive studies in more detail and derive the most important environmental aspects of operating room textiles. In a second step, we extend the operational perspective via the strategic perspective, namely environmental management systems and further existing life cycle instruments such as eco-labels. We then synthesize the gathered information into a decision vector. Finally, we discuss how the gathered data can be further exploited and give suggestions for a more sophisticated assessment.

Results and discussion

The review of the existing life cycle assessments on operating room textiles showed that procurers should not base their decisions exclusively on existing life cycle assessments. In addition to problems such as methodological weakness, incompleteness, outdated data, and poor verifiability, the information provided is far too complex to prepare procurement decisions regarding low-value products. Furthermore, the results for the textiles assessed in the existing life cycle assessments are not necessarily transferrable to the textiles considered by the procurer because of restrictive assumptions. Therefore, it is necessary to downscale the available information and synthesize it in an applicable decision support tool. Our decision vector consists of the key environmental aspects water, CO₂, energy, and waste and is completed by environmental management systems, eco-labels, and the countries of origin that matters for environmental and social aspects as well.

Conclusions

The decision vector supports procurers when considering environmental aspects in procurement decisions and provides a mechanism for balancing the information between overcomplexity and oversimplification. Therefore, it should be the basis for future development of an eco-label for operating room textiles.     

Mre11 dimers coordinate DNA end bridging and nuclease processing in double-strand-break repair

Mre11 forms the core of the multifunctional Mre11-Rad50-Nbs1 (MRN) complex that detects DNA double-strand breaks (DSBs), activates the ATM checkpoint kinase, and initiates homologous recombination (HR) repair of DSBs. To define the roles of Mre11 in both DNA bridging and nucleolytic processing during initiation of DSB repair, we combined small-angle X-ray scattering (SAXS) and crystal structures of Pyrococcus furiosus Mre11 dimers bound to DNA with mutational analyses of fission yeast Mre11. The Mre11 dimer adopts a four-lobed U-shaped structure that is critical for proper MRN complex assembly and for binding and aligning DNA ends. Further, mutations blocking Mre11 endonuclease activity impair cell survival after DSB induction without compromising MRN complex assembly or Mre11-dependant recruitment of Ctp1, an HR factor, to DSBs. These results show how Mre11 dimerization and nuclease activities initiate repair of DSBs and collapsed replication forks, as well as provide a molecular foundation for understanding cancer-causing Mre11 mutations in ataxia telangiectasia-like disorder (ATLD).     

Effects of hyperinsulinemia on hepatic metalloproteinases and their tissue inhibitors

To gain insight into the pathogenesis of hepatic fibrosis related to insulin resistance, we have examined the effects of euglycemic hyperinsulinemia on three matrix metalloproteinases (MMP-2, MMP-9, and MT1-MMP) and on two major tissue inhibitors of MMPs (TIMP-1 and TIMP-2) in liver of insulin-sensitive and insulin-resistant rats. Four hours of insulin infusion (4.8 mU.kg(-1).min(-1)) without or with lipid-heparin infusion (to produce insulin resistance) decreased hepatic MMP-2 mRNA (by RT-PCR), pro-MMP-2, MMP-2, MMP-9, and MT1-MMP (all by Western blots) and the gelatinolytic activity of MMP-2 (by gelatin zymography) by approximately 60-80%. Hyperinsulinemia ( approximately 1.6 mmol/l) increased TIMP-1 and TIMP-2 concentrations (by ELISA) in insulin-sensitive and insulin-resistant rats. Phosphoinositide 3-kinase was activated by insulin in insulin-sensitive rats and inhibited in insulin-resistant rats. Extracellular signal-regulated kinases 1/2 (ERK1/2) were activated by insulin in insulin-sensitive rats and partially inhibited in insulin-resistant rats; c-jun NH(2)-terminal kinase-1 (JNK1), JNK2/3, or p38 MAPK were only activated by lipid but not by insulin. We conclude that hyperinsulinemia, whether or not associated with insulin resistance, shifts the MMP/TIMP balance toward reduction of extracellular matrix degradation and thus may promote the development of hepatic fibrosis.     

Detection of Trichinella spiralis, T. britovi and T. pseudospiralis in muscle tissue with real-time PCR

Infections caused by Trichinella species occur throughout the world in many wild and domestic animals resulting in trichinellosis in men. In Europe, domestic pigs are predominantly infected by three Trichinella species: T. spiralis, T. britovi and T. pseudospiralis. Present methods for detection of Trichinella spp. (compressorium method, artificial digestion) do not always sufficiently recognize Trichinella larvae and these techniques are labor-intensive, time consuming and do not differentiate isolates on the species level since there are no distinguishing morphological features. Additionally, conventional PCRs cannot quantify numbers of larvae in infectious material. In order to better meet these requirements, we developed a real-time PCR assay for the accurate, rapid and specific identification of the three common European species of the genus Trichinella. The assay targets the large subunit of the mitochondrial rRNA (rrnL) and enables sensitive determination and discrimination of larvae in muscle tissue samples. The real-time PCR assay was developed and validated using reference and field strains from T. spiralis, T. britovi and T. pseudospiralis. In the described real-time PCR assay, the melting points of specific amplificates were always discernable via the melting curve from melting points of unspecific amplificates. This is important for the methods workflow because only C(T) values connected with the additional melting curve analysis allow a distinction of the individual species with confidence. The sensitivity of the technique enabled detection down to 0.1 Trichinella larva per gram meat sample. High disruption levels of tissues by mincing generally resulted in higher sensitivities than protocols without mincing. With its short completion time as well as accurate and specific detection of selected species this assay could become a convenient tool for the fast detection of Trichinella larvae in meat.     

A Pediocin-Producing Lactobacillus plantarum Strain Inhibits Listeria monocytogenes in a Multispecies Cheese Surface Microbial Ripening Consortium

The growth of Listeria monocytogenes WSLC 1364, originating from a cheese-borne outbreak, was examined in the presence and in the absence of a pediocin AcH-producing Lactobacillus plantarum strain on red smear cheese. Nearly complete inhibition was observed at 10² CFU of L. monocytogenes per ml of salt brine solution, while contamination with Listeria mutants resistant to pediocin resulted in high cell counts of the pathogen on the cheese surface. The inhibition was due to pediocin AcH added together with the L. plantarum culture to the brine solution but not to bacteriocin production in situ on cheese. Pediocin resistance developed in vitro at different but high frequencies in all 12 L. monocytogenes strains investigated, and a resistant mutant remained stable in a microbial surface ripening consortium over a 4-month production process in the absence of selection pressure. In conclusion, the addition of a L. plantarum culture is a potent measure for combating Listeria in a contaminated production line, but because of the potential development of resistance, it should not be used continuously over a long time in a production line.