Global gene expression analysis to identify molecular markers of uterine receptivity and embryo implantation

Infertility and spontaneous pregnancy losses are an enduring problem to women's health. The establishment of pregnancy depends on successful implantation, where a complex series of interactions occurs between the heterogeneous cell types of the uterus and blastocyst. Although a number of genes are implicated in embryo-uterine interactions during implantation, genetic evidence suggests that only a small number of them are critical to this process. To obtain a global view and identify novel pathways of implantation, we used a dual screening strategy to analyze the expression of nearly 10,000 mouse genes by microarray analysis. Comparison of implantation and interimplantation sites by a conservative statistical approach revealed 36 up-regulated genes and 27 down-regulated genes at the implantation site. We also compared the uterine gene expression profile of progesterone-treated, delayed implanting mice to that of mice in which delayed implantation was terminated by estrogen. The results show up-regulation of 128 genes and down-regulation of 101 genes after termination of the delayed implantation. A combined analysis of these experiments showed specific up-regulation of 27 genes both at the implantation site and during uterine activation, representing a broad diversity of molecular functions. In contrast, the majority of genes that were decreased in the combined analysis were related to host immunity or the immune response, suggesting the importance of these genes in regulating the uterine environment for the implanting blastocyst. Collectively, we identified genes with recognized roles in implantation, genes with potential roles in this process, and genes whose functions have yet to be defined in this event. The identification of unique genetic markers for the onset of implantation signifies that genome-wide analysis coupled with functional assays is a promising approach to resolve the molecular pathways required for successful implantation.     

CO2浓度升高对不同品种水稻镉吸收和根形态的影响

为了探讨CO2浓度升高下不同水稻品种荣优398 (RY)和粤杂889(YZ)吸收重金属Cd差异性的原因,利用水培试验研究了不同浓度Cd处理下两种水稻吸收Cd的差异及根形态的变化特征.结果表明:低Cd处理(5、10、20 μmol·L-1)显著增加水稻生物量;当Cd浓度高于50 μmol·L-1时,Cd胁迫效果开始显现,水稻生物量减少.CO2浓度升高显著增加了水稻的生物量,增加了YZ茎Cd含量而降低了RY茎Cd含量.在5～200 μmol·L-1的Cd浓度下,CO2浓度升高增加了YZ活性根在总根长中的比例,降低了RY活性根的比例.CO2浓度升高下不同水稻品种根形态的变化是导致其对Cd吸收差异性的原因之一.     

Purification and characterization of laccase from the white rot fungus Trametes versicolor

Laccase is one of the ligninolytic enzymes of white rot fungus Trametes versicolor 951022, a strain first isolated in Korea. This laccase was purified 209-fold from culture fluid with a yield of 6.2% using ethanol precipitation, DEAE-Sepharose, Phenyl-Sepharose, and Sephadex G-100 chromatography. T. versicolor 951022 excretes a single monomeric laccase showing a high specific activity of 91,443 U/mg for 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) as a substrate. The enzyme has a molecular mass of approximately 97 kDa as determined by SDS-PAGE, which is larger than those of other laccases reported. It exhibits high enzyme activity over broad pH and temperature ranges with optimum activity at pH 3.0 and a temperature of 50 degrees C. The Km value of the enzyme for substrate ABTS is 12.8 micrometer and its corresponding Vmax value is 8125.4 U/mg. The specific activity and substrate affinity of this laccase are higher than those of other white rot fungi, therefore, it may be potentially useful for industrial purposes.     

Production and selected fuel properties of biodiesel from promising non-edible oils: Euphorbia lathyris L., Sapium sebiferum L. and Jatropha curcas L

A comparative study on the composition, biodiesel production and fuel properties of non-edible oils from Euphorbia lathyris L. (EL), Sapium sebiferum L. (SS), and Jatropha curcas L. (JC) was conducted. Under optimal conditions, the FAME content and yield of the three oils were greater than 97.5 wt.% and 84.0%, respectively. The best biodiesel was produced from EL due to its high monounsaturation (82.66 wt.%, Cn: 1), low polyunsaturation (6.49 wt.%, Cn: 2, 3) and appropriate proportion of saturated components (8.78 wt.%, Cn: 0). Namely, EL biodiesel possessed a cetane number of 59.6, an oxidation stability of 10.4 h and a cold filter plug point of -11 °C. However, the cetane number (40.2) and oxidative stability (0.8 h) of dewaxed SS kernel oil (DSSK) biodiesel were low due to the high polyunsaturation (72.79 wt.%). In general, the results suggest that E. lathyris L. is a promising species for biodiesel feedstock.     

The mechanism of myoblast deformation in response to cyclic strain - A cytomechanical study

Mechanical strain is one of the important epigenetic factors that cause deformation and differentiation of skeletal muscles. This research was designed to investigate how myoblast deformation occurs after cyclic strain loading. Myoblasts were passaged three times and harvested; various cyclic strains (2.5kPa, 5kPa and 10kPa) were then loaded using a pulsatile mechanical system. The adaptive response of the myoblasts was observed at different time points (0.5h, 1h, 6h and 12h) post-loading. At the early stage of cyclic strain loading (<1h), almost no visible morphological changes were observed in the myoblasts. The actin cytoskeleton showed a disordered arrangement and a weak fluorescence expression; there was little expression of talin. At 6h and 12h post-loading, the myoblasts changed their orientation to parallel (in the 2.5kPa and 5kPa groups) or perpendicular (in the 10kPa group) to the direction of strain. Fluorescence expression of both the actin cytoskeleton and talin was significantly increased. The results suggest that cyclic strain has at least two ways to regulate adaptation of myoblasts: (1) by directly affecting actin cytoskeleton at an early stage post-loading to cause depolymerization; and (2) by later chemical signals transmitted from the extracellular side to intracellular side to initiate repolymerization.     

临泽绿洲边缘区棉花群体光合速率、蒸腾速率及水分利用效率

在甘肃河西走廊中部黑河中游绿洲边缘区,于6月下旬和8月上旬,利用Li-8100土壤碳通量测定系统与改进的同化箱联合对田间条件下早熟陆地棉(Gossypium hirsutum)品种新陆早8号的群体光合特性进行了研究.结果表明：试验地6月下旬的土壤呼吸速率和土壤蒸发速率显著高于8月上旬（P＜0.01）;棉花群体光合速率日变化均呈“单峰型”,6月下旬的群体光合速率显著高于8月上旬,其日平均值分别为（43.11±1.26）和（24.53±0.60）μmol CO₂·m^-2·s^-1, 差异极显著（P＜0.01）;群体蒸腾速率日变化也呈“单峰型”,6月下旬和8月上旬的日平均值分别为（3.10±0.34）和（1.60±0.26）mmol H₂O·m^-2·s^-1,两者存在极显著差异（P＜0.01）;6月下旬和8月上旬的群体水分利用效率日平均值分别为（15.67±1.77）和（23.08±5.54） mmol CO₂·mol^-1 H₂O,但差异不显著（P＞0.05）.两生育时期棉花群体光合速率与温度、光合有效辐射及土壤含水量均呈正相关关系.表明棉花群体光合速率在6月下旬和8月上旬均没有出现中午光合下调,8月由于土壤水分降低和植物叶片衰老,棉花群体光合速率和蒸腾速率显著降低,但水分利用效率并无显著下降.     

“共轭聚合物-产电菌”复合生物电极构建及其在微生物燃料电池中的应用

微生物燃料电池(Microbial fuel cell,MFC)作为一种生物电化学装置,在可再生能源生产和废水处理方面的巨大潜力已引起广泛关注。然而MFC面临输出功率低、欧姆内阻高以及启动时间长等问题,极大限制了其在实际工程中的应用。MFC中阳极是微生物附着的载体,对电子的产生及传递起着关键作用,开发优质的生物电极已发展成为改善MFC性能的有效途径。共轭聚合物具有成本低、电导率高、化学稳定性及生物相容性好等优点,利用共轭聚合物修饰生物电极结构,可以实现大比表面积、缩短电荷转移路径,从而实现高效生物电化学性能。同时,纳米级共轭聚合物包覆细菌,可以使细菌产生的电子有效地传递到电极。文中综述了最近报道的共轭聚合物在MFC中的应用,重点介绍了共轭聚合物修饰的MFC阳极,系统分析了共轭聚合物的优点及局限性,以及这些高效复合生物电极如何解决MFC应用中存在的低输出功率、高欧姆内阻及长启动时间等问题。     

Isolation of chicken embryonic stem cell and preparation of chicken chimeric model

Chicken embryonic stem cells (ESCs) were separated from blastoderms at stage-X and cultured in vitro. Alkaline phosphatase activity and stage-specific embryonic antigen-1 staining was conducted to detect ESCs. Then, chicken ESCs were transfected with linearized plasmid pEGFP-N1 in order to produce chimeric chicken. Firstly, the optimal electrotransfection condition was compared; the results showed the highest transfection efficiency was obtained when the field strength and pulse duration was 280 V and 75 μs, respectively. Secondly, the hatchability of shedding methods, drilling a window at the blunt end of egg and drilling a window at the lateral shell of egg was compared, the results showed that the hatchability was the highest for drilling a window at the lateral shell of egg. Thirdly, the hatchability of microinjection (ESCs was microinjected into chick embryo cavity) was compared too, the results showed there were significant difference between the injection group transfected with ESCs and that of other two groups. In addition, five chimeric chickens were obtained in this study and EGFP gene was expressed in some organs, but only two chimeric chicken expressed EGFP gene in the gonad, indicating that the chimeric chicken could be obtained through chick embryo cavity injection by drilling a window at the lateral shell of egg.     

Simulation of sequential batch reactor (SBR) operation for simultaneous removal of nitrogen and phosphorus

Modeling of the operation of sequential batch reactor (SBR) was performed to find out optimum design parameters for simultaneous removal of nitrogen and phosphorus in a small-scale wastewater treatment plant. The models were set up with material balances on SBR operation and Monod kinetics. The model parameters were obtained to best fit the experimental results in a small scale SBR. The models were useful in optimizing hydraulic retention time (HRT) and successfully simulated operations of SBR in a larger scale. Especially the model predicted well the reactions occurring in the filling period as well as the effect of dilution, and evaluated the performance of SBR process under diverse operating conditions.