Metabolic flux analysis in a nonstationary system: fed-batch fermentation of a high yielding strain of E. coli producing 1,3-propanediol

Metabolic fluxes estimated from stable-isotope studies provide a key to understanding cell physiology and regulation of metabolism. A limitation of the classical method for metabolic flux analysis (MFA) is the requirement for isotopic steady state. To extend the scope of flux determination from stationary to nonstationary systems, we present a novel modeling strategy that combines key ideas from isotopomer spectral analysis (ISA) and stationary MFA. Isotopic transients of the precursor pool and the sampled products are described by two parameters, D and G parameters, respectively, which are incorporated into the flux model. The G value is the fraction of labeled product in the sample, and the D value is the fractional contribution of the feed for the production of labeled products. We illustrate the novel modeling strategy with a nonstationary system that closely resembles industrial production conditions, i.e. fed-batch fermentation of Escherichia coli that produces 1,3-propanediol (PDO). Metabolic fluxes and the D and G parameters were estimated by fitting labeling distributions of biomass amino acids measured by GC/MS to a model of E. coli metabolism. We obtained highly consistent fits from the data with 82 redundant measurements. Metabolic fluxes were estimated for 20 time points during course of the fermentation. As such we established, for the first time, detailed time profiles of in vivo fluxes. We found that intracellular fluxes changed significantly during the fed-batch. The intracellular flux associated with PDO pathway increased by 10%. Concurrently, we observed a decrease in the split ratio between glycolysis and pentose phosphate pathway from 70/30 to 50/50 as a function of time. The TCA cycle flux, on the other hand, remained constant throughout the fermentation. Furthermore, our flux results provided additional insight in support of the assumed genotype of the organism.     

Determining Actinobacillus succinogenes metabolic pathways and fluxes by NMR and GC-MS analyses of 13C-labeled metabolic product isotopomers

Actinobacillus succinogenes is a promising candidate for industrial succinate production. However, in addition to producing succinate, it also produces formate and acetate. To understand carbon flux distribution to succinate and alternative products we fed A. succinogenes [1-(13)C]glucose and analyzed the resulting isotopomers of excreted organic acids, proteinaceous amino acids, and glycogen monomers by gas chromatography-mass spectrometry and nuclear magnetic resonance spectroscopy. The isotopomer data, together with the glucose consumption and product formation rates and the A. succinogenes biomass composition, were supplied to a metabolic flux model. Oxidative pentose phosphate pathway flux supplied, at most, 20% of the estimated NADPH requirement for cell growth. The model indicated that NADPH was instead produced primarily by the conversion of NADH to NADPH by transhydrogenase and/or by NADP-dependent malic enzyme. Transhydrogenase activity was detected in A. succinogenes cell extracts, as were formate and pyruvate dehydrogenases, which the model suggested were contributing to NADH production. Malic enzyme activity was also detected in cell extracts, consistent with the flux analysis results. Labeling patterns in amino acids and organic acids showed that oxaloacetate and malate were being decarboxylated to pyruvate. These are the first in vivo experiments to show that the partitioning of flux between succinate and alternative fermentation products can occur at multiple nodes in A. succinogenes. The implications for designing effective metabolic engineering strategies to increase A. succinogenes succinate production are discussed.     

Pim-1 regulates cardiomyocyte survival downstream of Akt

The serine-threonine kinases Pim-1 and Akt regulate cellular proliferation and survival. Although Akt is known to be a crucial signaling protein in the myocardium, the role of Pim-1 has been overlooked. Pim-1 expression in the myocardium of mice decreased during postnatal development, re-emerged after acute pathological injury in mice and was increased in failing hearts of both mice and humans. Cardioprotective stimuli associated with Akt activation induced Pim-1 expression, but compensatory increases in Akt abundance and phosphorylation after pathological injury by infarction or pressure overload did not protect the myocardium in Pim-1-deficient mice. Transgenic expression of Pim-1 in the myocardium protected mice from infarction injury, and Pim-1 expression inhibited cardiomyocyte apoptosis with concomitant increases in Bcl-2 and Bcl-X(L) protein levels, as well as in Bad phosphorylation levels. Relative to nontransgenic controls, calcium dynamics were significantly enhanced in Pim-1-overexpressing transgenic hearts, associated with increased expression of SERCA2a, and were depressed in Pim-1-deficient hearts. Collectively, these data suggest that Pim-1 is a crucial facet of cardioprotection downstream of Akt.     

Crystal structures of flax rust avirulence proteins AvrL567-A and -D reveal details of the structural basis for flax disease resistance specificity

The gene-for-gene mechanism of plant disease resistance involves direct or indirect recognition of pathogen avirulence (Avr) proteins by plant resistance (R) proteins. Flax rust (Melampsora lini) AvrL567 avirulence proteins and the corresponding flax (Linum usitatissimum) L5, L6, and L7 resistance proteins interact directly. We determined the three-dimensional structures of two members of the AvrL567 family, AvrL567-A and AvrL567-D, at 1.4- and 2.3-A resolution, respectively. The structures of both proteins are very similar and reveal a beta-sandwich fold with no close known structural homologs. The polymorphic residues in the AvrL567 family map to the surface of the protein, and polymorphisms in residues associated with recognition differences for the R proteins lead to significant changes in surface chemical properties. Analysis of single amino acid substitutions in AvrL567 proteins confirm the role of individual residues in conferring differences in recognition and suggest that the specificity results from the cumulative effects of multiple amino acid contacts. The structures also provide insights into possible pathogen-associated functions of AvrL567 proteins, with nucleic acid binding activity demonstrated in vitro. Our studies provide some of the first structural information on avirulence proteins that bind directly to the corresponding resistance proteins, allowing an examination of the molecular basis of the interaction with the resistance proteins as a step toward designing new resistance specificities.     

Gene delivery properties of end-modified poly(beta-amino ester)s

Here, we present the synthesis of a library of end-modified poly(beta-amino ester)s and assess their utility as gene delivery vehicles. Polymers were synthesized using a rapid, two-step approach that involves initial preparation of an acrylate-terminated polymer followed by a postpolymerization amine-capping step to generate end-functionalized polymers. Using a highly efficient poly(beta-amino ester), C32, we show that the terminal amine can greatly affect and improve polymer properties relevant to gene delivery. Specifically, the in vitro transfection levels can be increased by 30% and the optimal polymer:DNA ratio lowered 5-fold by conjugation of the appropriate end group. The most effective modifications were made by grafting primary diamine molecules to the chain termini. The added charge and hydrophobicity of some derivatives enhanced DNA binding and resulted in the formation of polymer-DNA complexes less than 100 nm in diameter. In addition, cellular uptake was improved 5-fold over unmodified C32. The end-modified poly(beta-amino ester)s presented here are some of the most effective gene-delivery polycations, superior to polyethylenimine and previously reported poly(beta-amino ester)s. These results show that the end-modification of poly(beta-amino ester)s is a general strategy to alter functionality and improve the delivery performance of these materials.     

The nucleolar channel system of human endometrium is related to endoplasmic reticulum and R-rings

The nucleolar channel system (NCS) is a well-established ultrastructural hallmark of the postovulation endometrium. Its transient presence has been associated with human fertility. Nevertheless, the biogenesis, composition, and function of these intranuclear membrane cisternae are unknown. Membrane systems with a striking ultrastructural resemblance to the NCS, termed R-rings, are induced in nuclei of tissue culture cells by overexpression of the central repeat domain of the nucleolar protein Nopp140. Here we provide a first molecular characterization of the NCS and compare the biogenesis of these two enigmatic organelles. Like the R-rings, the NCS consists of endoplasmic reticulum harboring the marker glucose-6-phosphatase. R-ring formation initiates at the nuclear envelope, apparently by a calcium-mediated Nopp140-membrane interaction, as supported by the calcium-binding ability of Nopp140, the inhibition of R-ring formation by calcium chelators, and the concentration of Nopp140 and complexed calcium in R-rings. Although biogenesis of the NCS may initiate similarly, the reduced presence of complexed calcium and Nopp140 suggests the involvement of additional factors.     

Relative vs. absolute physiological measures as predictors of mountain bike cross-country race performance

The aims of this study were to document the effect terrain has on the physiological responses and work demands (power output) of riding a typical mountain bike cross-country course under race conditions. We were particularly interested in determining whether physiological measures relative to mass were better predictors of race performance than absolute measures. Eleven A-grade male cross-country mountain bike riders (VO2max 67.1 +/- 3.6 ml x kg(-1) x min(-1)) performed 2 tests: a laboratory-based maximum progressive exercise test, and a 15.5-km (six 2.58-km laps) mountain bike cross-country time trial. There were significant differences among the speed, cadence, and power output measured in each of 8 different terrain types found in the cross-country time trial course. The highest average speed was measured during the 10-15% downhill section (22.7 +/- 2.6 km x h(-1)), whereas the cadence was highest in the posttechnical flat sections (74.3 +/- 5.6 rpm) and lowest on the 15-20% downhill sections (6.4 +/- 12.1 rpm). The highest mean heart rate (HR) was obtained during the steepest (15-20% incline) section of the course (179 +/- 8 b x min(-1)), when the power output was greatest (419.8 +/- 39.7 W). However, HR remained elevated relative to power output in the downhill sections of the course. Physiological measures relative to total rider mass correlated more strongly to average course speed than did absolute measures (peak power relative to mass r = 0.93, p < 0.01, vs. peak power r = 0.64, p < 0.05; relative VO2max r = 0.80, p < 0.05, vs. VO2max r = 0.66, p < 0.05; power at anaerobic threshold relative to mass r = 0.78, p < 0.05, vs. power at anaerobic threshold r = 0.5, p < 0.05). This suggests that mountain bike cross-country training programs should focus upon improving relative physiological values rather than focusing upon maximizing absolute values to improve performance.     

Effect of starting stance on initial sprint performance

The effect of different starting stances from a standing position on short sprint times and the subsequent variability in times was investigated in this study. A dual-beam timing light system was used to measure 5- and 10-m times for 3 different standing starts commonly found in the sporting environment: parallel (feet parallel to the start line), split (lead left foot on start line, right leg back), and false (initial parallel start, right leg drops back to split start when movement initiated). The parallel start was found to be significantly (alpha < 0.05) slower than the other 2 stances for both the 5- ( approximately 8.3%) and the 10-m (approximately 5.9%) distances. Within the trial, variation of the different starting stances was equally consistent; however, there was less variability for the 10-m distance (CV = 1.16-1.67%) than the 5-m distance (CV = 1.43-2.15%) for each start for both men and women. The split and false start seem to offer the best option as a movement strategy for minimizing short-distance sprint times. However, the benefits of these 2 starts are less clear if total movement time is the variable of interest.     

Predictors of sprint start speed: the effects of resistive ground-based vs. inclined treadmill training

There is currently no consensus with regard to the most effective method to train for improved acceleration, or with regard to which kinematic variable provides the greatest opportunity for improvement in this important performance characteristic. The purpose of this study was to determine the effects of resistive ground-based speed training and incline treadmill speed training on speed-related kinematic measures and sprint start speed. The hypothesis tested was that incline treadmill training would improve sprint start time, while the ground-based resistive training would not. Corollary hypotheses were that treadmill training would increase stride frequency and ground-based training would not affect kinematics during the sprint start. Thirty-one high school female soccer players (15.7 +/- 0.5 years) were assigned to either treadmill (n = 17) or ground-based (n = 14) training groups and trained 2 times a week for 6 weeks. The treadmill group utilized incline speed training on a treadmill, while the ground-based group utilized partner band resistance ground-based techniques. Three-dimensional motion analysis was used (4.5 m mark) before and after training to quantify kinematics during the fastest of 3 recorded sprint starts (9.1 m). Both groups decreased average sprint start time from 1.75 +/- 0.12 to 1.68 +/- 0.08 seconds (p < 0.001). Training increased stride frequency (p = 0.030) but not stride length. After training, total vertical pelvic displacement and stride length predicted 62% of the variance in sprint start time for the resistive ground-based group, while stride length and stride frequency accounted for 67% prediction of the variance in sprint start time for the treadmill group. The results of this study indicate that both incline treadmill and resistive ground-based training are effective at improving sprint start speed, although they potentially do so through differing mechanisms.