Inhibition of elongation and H+ and K+ transport by the phosphodiesterase inhibitor aminophylline in plant tissue

Aminophylline, an inhibitor of cyclic nucleotide phosphodiesterase (EC 3.1.4.17), inhibits elongation and correlated H⁺ and K⁺ transport in embryos of Haplopappus gracilis and in pea internode segments. Moreover, the drug strongly inhibits the stimulation of these processes by fusicoccin and indole-3-acetic acid and reduces passive permeability of the membrane. The possible mechanisms of action of aminophylline are discussed.Abbreviations cAMP adenosine 3:5-cyclic monophosphate - FC fusicoccin - IAA indole-3-acetic acid - MES 2-N-morpholinoethanesulfonic acid - PDE cyclic nucleotide phosphodiesterase     

Identification and purification of a calcium-binding protein from Bacillus subtilis

A Ca(2+)-binding protein was identified in Bacillus subtilis in the log phase of growth. The molecular mass of this protein is about 38 kDa as estimated by polyacrylamide gel electrophoresis in the presence of SDS and by gel filtration. The protein was found to be resistant 10 min at 65 degrees C and was purified about 400 times, starting from heated crude extract, by conventional procedures. This novel protein is able to bind Ca2+ in the presence of an excess of MgCl2 and KCl both in solution and after SDS gel electrophoresis and electrotransfer. Since an impairment of the Ca2+ intake, in Bacillus subtilis, results in an impairment of chemotactic behavior (Matsushita, T. et al (1988) FEBS lett. 236, 437-440), 38 kDa protein may be involved in the regulation of chemotaxis.     

Determination of (-)-threo-chlorocitric acid in human plasma by gas chromatography—positive chemical-ionization mass spectrometry

A method is described for measuring (-)-threo-chlorocitric acid in human plasma. Plasma is acidified to pH 1 to minimize lactonization and a¹³C analogue of (-)-threo-chlorocitric acid is added as internal standard. The acidified plasma is then extracted with ethyl acetate containing 10% methanol. The ethyl acetate—methanol extract is back-extracted with acetate buffer (pH 5). This extract, following adjustment to pH 1, is reextracted with ethyl acetate. The residue after removal of the ethyl acetate is treated with ethereal diazomethane. The wet residue is reconstituted in ethyl acetate and a portion of this solution is analyzed by gas chromatography—chemical ionization mass spectrometry. The mass spectrometer is set to monitorm/z269 [MH⁺ of trimethylated (-)-threo-chlorocitric acid] andm/z270 [MH⁺ of trimethylated (-)-threo-[¹³C]chlorocitric acid] in the gas chromatographic effluent. Them/z/269 tom/z270 ion ratio in a sample containing an unknown amount of (-)-threo-chlorocitric acid is converted to an amount of compound using a calibration curve. The calibration curve is generated by analyzing control plasma spiked with various known amounts of (-)-threo-chlorocitric acid and a fixed amount of (-)-threo-[¹³C]chlorocitric acid. The limit of quantitation is 0.1–0.6 μg ml⁻¹, depending on the characteristics of the calibration curve generated with each set of samples. The precision (relative standard deviation) at a concentration of 2 μg ml⁻¹ is 3.3%.     

Liquid chromatographic separation of chiral diarylcarbinols

The direct HPLC separation of three chiral carbinols of general formula Mesityl-CH(OH)-Aryl has been achieved using Pirkle (R)-DNBPG ionic or covalent columns and, for Aryl = o-tolyl, on a Chiralpak OP(+) phase. It is apparent that steric hindrance and hydrogen bonding play important roles in chiral recognition. Two compounds structurally very similar but lacking the hydroxyl group were not resolved in their enantiomeric pairs. © 1992 Wiley-Liss, Inc.     

Nusinersen treatment and cerebrospinal fluid neurofilaments: An explorative study on Spinal Muscular Atrophy type 3 patients

The antisense oligonucleotide Nusinersen has been recently licensed to treat spinal muscular atrophy (SMA). Since SMA type 3 is characterized by variable phenotype and milder progression, biomarkers of early treatment response are urgently needed. We investigated the cerebrospinal fluid (CSF) concentration of neurofilaments in SMA type 3 patients treated with Nusinersen as a potential biomarker of treatment efficacy. The concentration of phosphorylated neurofilaments heavy chain (pNfH) and light chain (NfL) in the CSF of SMA type 3 patients was evaluated before and after six months since the first Nusinersen administration, performed with commercially available enzyme-linked immunosorbent assay (ELISA) kits. Clinical evaluation of SMA patients was performed with standardized motor function scales. Baseline neurofilament levels in patients were comparable to controls, but significantly decreased after six months of treatment, while motor functions were only marginally ameliorated. No significant correlation was observed between the change in motor functions and that of neurofilaments over time. The reduction of neurofilament levels suggests a possible early biochemical effect of treatment on axonal degeneration, which may precede changes in motor performance. Our study mandates further investigations to assess neurofilaments as a marker of treatment response.     

Environmental sustainability of orthopedic devices produced with powder bed fusion

Additive manufacturing consists in melting metallic powders to produce objects from 3D data, layer upon layer. Its industrial applications range from automotive, biomedical (e.g., prosthetic implants for dentistry and orthopedics), aeronautics and others. This study uses life cycle assessment to evaluate the possible improvement in environmental performance of laser‐based powder bed fusion additive manufacturing systems on prosthetic device production. Environmental impacts due to manufacturing, use, and end of life of the designed solution were assessed. In addition, two powder production technologies, gas atomization (GA) and plasma atomization (PA), were compared in order to establish the most sustainable one. Production via traditional subtractive technologies and the additive manufacturing production were also compared. 3D building was found to have a significant environmental advantage compared to the traditional technology. The powder production process considerably influences on a damage point of view the additive manufacturing process; however, its impact can be mitigated if GA powders are employed.     

Correction to: Population genomic structure of the black coral Antipathella subpinnata in Mediterranean Vulnerable Marine Ecosystems

Coral Reefs - A correction to this paper has been published: https://doi.org/10.1007/s00338-021-02120-y     

FLUKA Monte Carlo simulation for the Leksell Gamma Knife Perfexion radiosurgery system: Homogeneous media

The purpose of this work is to investigate the capability of the FLUKA Monte Carlo (MC) code to simulate the Elekta Leksell Gamma Knife Perfexion (LGK-PFX) and reproduce the Treatment Planning System (TPS) Leksell GammaPlan version 8.2 (LGP) dose calculations for the case of a water equivalent phantom target. Thanks to the collaboration with Elekta Instruments AB, the collimation system geometry, the source positions and all the involved material have been simulated in detail. The relative linear dose distribution along the three coordinate axes, for each collimator size, and the Relative Output Factors (ROF) have been investigated. The simulation has been validated comparing simulated linear dose profiles with measurements performed with EBT radiochromic films. The acceptance criterion between experimental data and FLUKA results is based on the gamma index (GI) method. The FLUKA MC calculation for the ROF provided the values of 0.920 for the 8 mm collimators and 0.800 for the 4 mm collimators. These values are in good agreement with the Elekta reference data of 0.924 and 0.805 respectively. The percentage difference between calculated and reference values for the ROF is under 1% and within the FLUKA uncertainty. Also the simulated relative dose profiles show a good agreement with the LGP calculation expressed by means of the gamma index method. This established accuracy proves that FLUKA is a suitable and powerful tool in order to reproduce successfully the LGP calculations for the homogeneous media.     

Comparative morphology of selected characters of the Pentatomidae foreleg (Hemiptera,Heteroptera)

Heteropteran legs are very diverse within and among taxa, and such variation is frequently correlated with life habits. Structural modifications are commonly present in the legs of the Pentatomoidea but are poorly studied. Using scanning electron microscopy, the tibia and pretarsal microstructure of 82 species of Pentatomidae (Heteroptera), three species of Scutelleridae, and ten species of Thyreocoridae were described, focusing on the pretarsal structure, the foretibial apparatus, and the foretibial comb. The Pentatomidae, the Scutelleridae, and the Thyreocoridae have uniform pretarsal structures. Variation can be found in the length of the parempodial setae and in the shape of the parempodial projections. The foretibial combs of the Pentatomidae, the Thyreocoridae, and the Scutelleridae are described for the first time, and we have demonstrated that there is low structural variation in the foretibial comb complex of the studied species. The setae organization and distribution on the foretibial apparatus is uniform in the families studied. However, the Asopinae (Pentatomidae) bear a foretibial apparatus that is uniquely organized. The taxonomic and phylogenetic relevance of the pretarsal traits, the foretibial apparatus, and the foretibial comb are discussed.