Yarrowia lipolytica lipase production enhanced by increased air pressure

Aims: To study the cellular growth and morphology of Yarrowia lipolytica W29 and its lipase and protease production under increased air pressures. Methods and Results: Batch cultures of the yeast were conducted in a pressurized bioreactor at 4 and 8 bar of air pressure and the cellular behaviour was compared with cultures at atmospheric pressure. No inhibition of cellular growth was observed by the increase of pressure. Moreover, the improvement of the oxygen transfer rate (OTR) from the gas to the culture medium by pressurization enhanced the extracellular lipase activity from 96·6 U l^?1 at 1 bar to 533·5 U l^?1 at 8 bar. The extracellular protease activity was reduced by the air pressure increase, thereby eliciting further lipase productivity. Cell morphology was slightly affected by pressure, particularly at 8 bar, where cells kept the predominant oval form but decreased in size. Conclusions: OTR improvement by total air pressure rise up to 8 bar in a bioreactor can be applied to the enhancement of lipase production by Y. lipolytica. Significance and Impact of the Study: Hyperbaric bioreactors can be successfully applied for yeast cells cultivation, particularly in high‐density cultures used for enzymes production, preventing oxygen limitation and consequently increasing overall productivity.     

Isolation and sequence analysis of the genomic DNA fragment encoding an aspartic proteinase inhibitor homologue from potato (Solanum tuberosum L.)

A genomic DNA clone encoding an aspartic proteinase inhibitor of potato was isolated from a lambda EMBL3 phage library using the aspartic proteinase inhibitor cDNA as a hybridization probe. The gene has all characteristic sequences normally found in eucaryotic genes. Typical CAAT and TATA box sequences were found in the 5-upstream region. In this part are also two putative regulatory AGGA box sequences located. In the genomic sequence there are no intron sequences interrupting the coding region. An open reading frame of the gene encodes a precursor protein of 217 amino acids which shows high percent identity with the aspartic proteinase inhibitor cDNA.     

Comparative ability of rat seminiferous tubules, interstitium, and whole testes to utilize cholesterol-1,5-3H as a substrate for testosterone synthesis and the intratesticular distribution of cholesterol side-chain cleavage enzyme.

Homogenates of rat seminiferous tubules, interstitium and intact testis tissues were assessed for their ability to convert cholesterol -1,2-3H to testosterone in vitro. While 3H-testosterone synthesis was observed in incubates of interstitial and whole testis homogenates, no synthesis was detectable in homogenates of seminiferous tubules. To determine whether cholesterol side-chain cleavage enzyme (CSCCE) was deficient or absent in tubules, mitochondria from tubules, interstitium and whole testes were analyzed for CSCCE activity by measuring conversion of cholesterol -26-14C to 14C-isocaproate (+pregnenolone). Interstitial mitochondrial preparations from each of six testes were found to be approximately 200 times more active in CSCCE than the corresponding tubule mitochondria, and 1600-1800 times more active on a specific activity basis. Although caution is required in extrapolation of in vitro data to the in vivo state, these findings suggest rat seminiferous tubules may be incapable of de novo testosterone biosynthesis and that this lack of synthetic ability may be due to a deficiency of CSCCE.     

Phytochemical Characterization of Cannabis sativa L. Roots from Northeastern Brazil

This article describes the phytochemical study of Cannabis sativa roots from northeastern Brazil. The dried plant material was pulverized and subjected to exhaustive maceration with ethanol at room temperature, obtaining the crude ethanolic extract (Cs-EEBR). The volatile compounds were analyzed by gas chromatography coupled with mass spectrometry (GC/MS), which allowed to identify 22 compounds by comparing the linear retention index (LRI), the similarity index (SI) and the fragmentation pattern of the constituents with the literature. By this technique the major compounds identified were: friedelan-3-one and β-sitosterol. In addition, two fractions were obtained from Cs-EEBR by classical column chromatography and preparative thin layer chromatography. These fractions were analyzed by NMR and IR and together with the mass spectrometry data allowed to identify the compounds: epifriedelanol, friedelan-3-one, β-sitosterol and stigmasterol. The study contributed to the phytochemical knowledge of Cannabis sativa, specifically the roots, as there are few reports on the chemical constituents of this part of the plant.     

Shoot organogenesis and plant regeneration in <Emphasis Type="Italic">Pityopsis ruthii</Emphasis>

Pityopsis ruthii is an endangered herbaceous perennial species from the United States. In vitro multiplication of this species can be valuable for germplasm conservation. Flower receptacles of P. ruthii were cultured on Murashige and Skoog medium (MS) supplemented with 11.4 μM indole-3-acetic acid (IAA) in combination with 2.2, 4.4 or 8.8 μM 6-benzyladenine (BA). Shoots were visible within 14–28 days and three plants were successfully rooted on MS medium supplemented with 5.7 μM IAA. A two tailed t-test for paired-variates revealed that shoot regeneration on MS medium amended with 11.4 μM IAA and 2.2 μM BA was significantly higher (P < 0.05) than on other treatments. Leaf explants were also cultured on MS not supplemented with growth regulators or supplemented with 11.4 μM IAA in combination with 0, 2.2, 4.4 or 8.8 μM BA. Shoots were visible within 21–35 days and one plant was successfully rooted on MS medium supplemented with 5.4 μM NAA. Shoot regeneration on MS medium augmented with 11.4 μM IAA and 2.2 μM BA was significantly higher (P < 0.05) than the other treatments according to analysis of variance (ANOVA) with a rank transformation. Hyperhydricity and rooting of shoots was problematic for explants derived from flower receptacles and leaf tissue, but viable plants were regenerated using both explants sources indicating the potential role for micropropagation in the ex situ conservation of the species.     

Structure–function relationships of the peptide Paulistine: A novel toxin from the venom of the social wasp Polybia paulista

Background

The peptide Paulistine was isolated from the venom of wasp Polybia paulista. This peptide exists under a natural equilibrium between the forms: oxidised — with an intra-molecular disulphide bridge; and reduced — in which the thiol groups of the cysteine residues do not form the disulphide bridge. The biological activities of both forms of the peptide are unknown up to now.

Methods

Both forms of Paulistine were synthesised and the thiol groups of the reduced form were protected with the acetamidemethyl group [Acm-Paulistine] to prevent re-oxidation. The structure/activity relationships of the two forms were investigated, taking into account the importance of the disulphide bridge.

Results

Paulistine has a more compact structure, while Acm-Paulistine has a more expanded conformation. Bioassays reported that Paulistine caused hyperalgesia by interacting with the receptors of lipid mediators involved in the cyclooxygenase type II pathway, while Acm-Paullistine also caused hyperalgesia, but mediated by receptors involved in the participation of prostanoids in the cyclooxygenase type II pathway.

Conclusion

The acetamidemethylation of the thiol groups of cysteine residues caused small structural changes, which in turn may have affected some physicochemical properties of the Paulistine. Thus, the dissociation of the hyperalgesy from the edematogenic effect when the actions of Paulistine and Acm-Paulistine are compared to each other may be resulting from the influence of the introduction of Acm-group in the structure of Paulistine.

General significance

The peptides Paulistine and Acm-Paulistine may be used as interesting tools to investigate the mechanisms of pain and inflammation in future studies.     

Density functional theory study of interactions between carbon monoxide and iron tetraaza macrocyclic complexes,FeTXTAA (X = −Cl, −OH, −OCH<Subscript>3</Subscript>, −NH<Subscript>2</Subscript>, and –NO<Subscript>2</Subscript>)

This work describes a DFT level theoretical quantum study using the B3LYP functional with the Lanl2TZ(f)/6-31G* basis set to calculate parameters including the bond distances and angles, electronic configurations, interaction energies, and vibrational frequencies of FeTClTAA (iron-tetrachloro-tetraaza[14]annulene), FeTOHTAA (iron-tetrahydroxy-tetraaza[14]annulene), FeTOCH₃TAA (iron- tetramethoxy-tetraaza[14]annulene), FeTNH₂TAA (iron-tetraamino-tetraaza[14]annulene), and FeTNO₂TAA (iron-tetranitro-tetraaza[14]annulene) complexes, as well as their different spin multiplicities. The calculations showed that the complexes were most stable in the triplet spin state (S?=?1), while, after interaction with carbon monoxide, the singlet state was most stable. The reactivity of the complexes was evaluated using HOMO–LUMO gap calculations. Parameter correlations were performed in order to identify the best complex for back bonding (3d _xzFe?→?2p _xC and 3d _yzFe?→?2p _zC) with carbon monoxide, and the degree of back bonding increased in the order: FeTNO₂TAA?<?FeTClTAA?<?FeTOHTAA?<?FeTOCH₃TAA?<?FeTNH₂TAA.