Biodiversity improves the ecological design of sustainable biofuel systems

For algal biofuels to become a commercially viable and sustainable means of decreasing greenhouse gas emissions, growers are going to need to design feedstocks that achieve at least three characteristics simultaneously as follows: attain high yields; produce high quality biomass; and remain stable through time. These three qualities have proven difficult to achieve simultaneously under the ideal conditions of the laboratory, much less under field conditions (e.g., outdoor culture ponds) where feedstocks are exposed to highly variable conditions and the crop is vulnerable to invasive species, disease, and grazers. Here, we show that principles from ecology can be used to improve the design of feedstocks and to optimize their potential for “multifunctionality.” We performed a replicated experiment to test these predictions under outdoor conditions. Using 80 ponds of 1,100 L each, we tested the hypotheses that polycultures would outperform monocultures in terms of the following functions: biomass production, yield of biocrude from biomass, temporal stability, resisting population crashes, and resisting invasions by unwanted species. Overall, species richness improved stability, biocrude yield, and resistance to invasion. While this suggests that polycultures could outperform monocultures on average, invasion resistance was the only function where polycultures outperformed the best single species in the experiment. Due to tradeoffs among different functions that we measured, no species or polyculture was able to maximize all functions simultaneously. However, diversity did enhance the potential for multifunctionality—the most diverse polyculture performed more functions at higher levels than could any of the monocultures. These results are a key finding for ecological design of sustainable biofuel systems because they show that while a monoculture may be the optimal choice for maximizing short‐term biomass production, polycultures can offer a more stable crop of the desired species over longer periods of time.     

Domestication and the storage starch biosynthesis pathway: signatures of selection from a whole sorghum genome sequencing strategy

Next‐generation sequencing of complete genomes has given researchers unprecedented levels of information to study the multifaceted evolutionary changes that have shaped elite plant germplasm. In conjunction with population genetic analytical techniques and detailed online databases, we can more accurately capture the effects of domestication on entire biological pathways of agronomic importance. In this study, we explore the genetic diversity and signatures of selection in all predicted gene models of the storage starch synthesis pathway of Sorghum bicolor, utilizing a diversity panel containing lines categorized as either ‘Landraces’ or ‘Wild and Weedy’ genotypes. Amongst a total of 114 genes involved in starch synthesis, 71 had at least a single signal of purifying selection and 62 a signal of balancing selection and others a mix of both. This included key genes such as STARCH PHOSPHORYLASE 2 (SbPHO2, under balancing selection), PULLULANASE (SbPUL, under balancing selection) and ADP‐glucose pyrophosphorylases (SHRUNKEN2, SbSH2 under purifying selection). Effectively, many genes within the primary starch synthesis pathway had a clear reduction in nucleotide diversity between the Landraces and wild and weedy lines indicating that the ancestral effects of domestication are still clearly identifiable. There was evidence of the positional rate variation within the well‐characterized primary starch synthesis pathway of sorghum, particularly in the Landraces, whereby low evolutionary rates upstream and high rates downstream in the metabolic pathway were expected. This observation did not extend to the wild and weedy lines or the minor starch synthesis pathways.     

Regional and seasonal variation in airborne grass pollen levels between cities of Australia and New Zealand

Although grass pollen is widely regarded as the major outdoor aeroallergen source in Australia and New Zealand (NZ), no assemblage of airborne pollen data for the region has been previously compiled. Grass pollen count data collected at 14 urban sites in Australia and NZ over periods ranging from 1 to 17 years were acquired, assembled and compared, revealing considerable spatiotemporal variability. Although direct comparison between these data is problematic due to methodological differences between monitoring sites, the following patterns are apparent. Grass pollen seasons tended to have more than one peak from tropics to latitudes of 37°S and single peaks at sites south of this latitude. A longer grass pollen season was therefore found at sites below 37°S, driven by later seasonal end dates for grass growth and flowering. Daily pollen counts increased with latitude; subtropical regions had seasons of both high intensity and long duration. At higher latitude sites, the single springtime grass pollen peak is potentially due to a cooler growing season and a predominance of pollen from C₃ grasses. The multiple peaks at lower latitude sites may be due to a warmer season and the predominance of pollen from C₄ grasses. Prevalence and duration of seasonal allergies may reflect the differing pollen seasons across Australia and NZ. It must be emphasized that these findings are tentative due to limitations in the available data, reinforcing the need to implement standardized pollen-monitoring methods across Australasia. Furthermore, spatiotemporal differences in grass pollen counts indicate that local, current, standardized pollen monitoring would assist with the management of pollen allergen exposure for patients at risk of allergic rhinitis and asthma.     

Importance of long-time simulations for rare event sampling in zinc finger proteins

Molecular dynamics (MD) simulation methods have seen significant improvement since their inception in the late 1950s. Constraints of simulation size and duration that once impeded the field have lessened with the advent of better algorithms, faster processors, and parallel computing. With newer techniques and hardware available, MD simulations of more biologically relevant timescales can now sample a broader range of conformational and dynamical changes including rare events. One concern in the literature has been under which circumstances it is sufficient to perform many shorter timescale simulations and under which circumstances fewer longer simulations are necessary. Herein, our simulations of the zinc finger NEMO (2JVX) using multiple simulations of length 15, 30, 1000, and 3000 ns are analyzed to provide clarity on this point.     

THE BINDING OF 5-HYDROXYTRYPTAMINE TO BUTANOL EXTRACTS OF RAT BRAIN STEM

Abstract— When butanol-water extracts of rat brain stem were incubated with [³H]5-HT, (5 × 10⁻⁷ m ), and the components resolved by chromatography on LH₂₀ Sephadex, a peak representing approximately 70% of the eluted radioactivity was found in chloroform-methanol 4:1. The peak was not found in identically prepared extracts from rat diaphragm, neither was a similar peak found when brain extracts were incubated with [¹⁴C]ACh (10⁻⁶ m ), suggesting a degree of selectivity. Binding was not saturated at concentrations of 5 × 10⁻⁵ m -5-HT. The binding was highly sensitive to the presence of water, requiring about 15% (v/v) for optimum binding. The implications of these findings are discussed in terms of a possible '5-HT receptor'.     

The nucleotide sequence of an unusual non-transcribed spacer and its ancestor in the rDNA in Chironomus thummi.

The nucleotide sequence of the non-transcribed spacer (NTS) in the ribosomal DNA (rDNA) of Chironomus thummi thummi and Chironomus thummi piger, including major parts of the external transcribed spacer, is described. The NTS of the two subspecies are very different in length, (thummi, 7 kb, piger, 2 kb); this is due to the insertion into the NTS of C.th. thummi of a large cluster of highly repetitive DNA sequences which are not present in the NTS of C. th. piger. The repetitive sequences, called Cla elements, are present in high copy number elsewhere in the genome of C. th. thummi and, in lower copy number, in the genome of C. th. piger in which they are mainly in the centromeric regions. Sequencing of the NTS of thummi and piger yielded information on the junctions between the Cla element cluster and the original NTS sequence, as well as on the sequence of the integration site before the transposition has occurred. The integration site is characterized by a dA cluster at the one end and a dT cluster at the other.     

Conservative repair of a chromosomal double-strand break by single-strand DNA through two steps of annealing

The repair of chromosomal double-strand breaks (DSBs) is essential to normal cell growth, and homologous recombination is a universal process for DSB repair. We explored DSB repair mechanisms in the yeast Saccharomyces cerevisiae using single-strand oligonucleotides with homology to both sides of a DSB. Oligonucleotide-directed repair occurred exclusively via Rad52- and Rad59-mediated single-strand annealing (SSA). Even the SSA domain of human Rad52 provided partial complementation for a null rad52 mutation. The repair did not involve Rad51-driven strand invasion, and moreover the suppression of strand invasion increased repair with oligonucleotides. A DSB was shown to activate targeting by oligonucleotides homologous to only one side of the break at large distances (at least 20 kb) from the break in a strand-biased manner, suggesting extensive 5' to 3' resection, followed by the restoration of resected DNA to the double-strand state. We conclude that long resected chromosomal DSB ends are repaired by a single-strand DNA oligonucleotide through two rounds of annealing. The repair by single-strand DNA can be conservative and may allow for accurate restoration of chromosomal DNAs with closely spaced DSBs.     

Multifunctional grains for the future: genetic engineering for enhanced and novel cereal quality

Cereals provide more than half the world population’s calorific intake, and have a variety of other important uses as food and beverage ingredients, livestock feeds, and as sources of renewable energy and industrial components. The technology to genetically modify many important cereals is now well-established, thereby presenting new opportunities to produce cereals with enhanced quality and novel properties. In 2007, GM (genetically modified) maize with insect and herbicide resistance was grown on over 30 million hectares worldwide, yet to date, there are no GM cereals with enhanced or novel grain (end-use) qualities being grown in commercial farmers’ fields. This review will discuss some of the latest GM technology developments reported to enhance the quality of cereals for food and other uses. Developments and opportunities involving gene manipulation for starch and protein quality, as well as non-starch polysaccharides, phenolic compounds and micronutrients will also be discussed. The current paucity of GM cereals with enhanced grain quality is not related to the absence of technological progress, rather it is the regulatory and consumer acceptance issues that have slowed the release of these crops.