Site-specific PEGylation of protein disulfide bonds using a three-carbon bridge

The covalent conjugation of a functionalized poly(ethylene glycol) (PEG) to multiple nucleophilic amine residues results in a heterogeneous mixture of PEG positional isomers. Their physicochemical, biological, and pharmaceutical properties vary with the site of conjugation of PEG. Yields are low because of inefficient conjugation chemistry and production costs high because of complex purification procedures. Our solution to these fundamental problems in PEGylating proteins has been to exploit the latent conjugation selectivity of the two sulfur atoms that are derived from the ubiquitous disulfide bonds of proteins. This approach to PEGylation involves two steps: (1) disulfide reduction to release the two cysteine thiols and (2) re-forming the disulfide by bis-alkylation via a three-carbon bridge to which PEG was covalently attached. During this process, irreversible denaturation of the protein did not occur. Mechanistically, the conjugation is conducted by a sequential, interactive bis-alkylation using alpha,beta-unsaturated beta'-monosulfone functionalized PEG reagents. The combination of (a) maintaining the protein's tertiary structure after disulfide reduction, (b) the mechanism for bis-thiol selectivity of the PEG reagent, and (c) the steric shielding of PEG ensure that only one PEG molecule is conjugated at each disulfide bond. PEG was site-specifically conjugated via a three-carbon bridge to 2 equiv of the tripeptide glutathione, the cyclic peptide hormone somatostatin, the tetrameric protein l-asparaginase, and to the disulfides in interferon alpha-2b (IFN). SDS-PAGE, mass spectral, and NMR analyses were used to confirm conjugation, thiol selectivity, and connectivity. The biological activity of the l-asparaginase did not change after the attachment of four PEG molecules. In the case of IFN, a small reduction in biological activity was seen with the single-bridged IFN (without PEG attached). A significantly larger reduction in biological activity was seen with the three-carbon disulfide single-bridged PEG-IFNs and with the double-bridged IFN (without PEG attached). The reduction of the PEG-IFN's in vitro biological activity was a consequence of the steric shielding caused by PEG, and it was comparable to that seen with all other forms of PEG-IFNs reported. However, when a three-carbon bridge was used to attach PEG, our PEG-IFN's biological activity was found to be independent of the length of the PEG. This property has not previously been described for PEG-IFNs. Our studies therefore suggest that peptides, proteins, enzymes, and antibody fragments can be site-specifically PEGylated across a native disulfide bond using three-carbon bridges without destroying their tertiary structure or abolishing their biological activity. The stoichiometric efficiency of this approach also enables recycling of any unreacted protein. It therefore offers the potential to make PEGylated biopharmaceuticals as cost-effective medicines for global use.     

FTY720 (Gilenya) phosphate selectivity of sphingosine 1-phosphate receptor subtype 1 (S1P1) G protein-coupled receptor requires motifs in intracellular loop 1 and transmembrane domain 2

FTY720 phosphate (FTY720P) is a high potency agonist for all the endothelial differentiation gene family sphingosine 1-phosphate (S1P) receptors except S1P receptor subtype 2 (S1P(2)). To map the distinguishing features of S1P(2) ligand recognition, we applied a computational modeling-guided mutagenesis strategy that was based on the high degree of sequence homology between S1P(1) and S1P(2). S1P(2) point mutants of the ligand-binding pocket were characterized. The head group-interacting residues Arg3.28, Glu3.29, and Lys7.34 were essential for activation. Mutation of residues Ala3.32, Leu3.36, Val5.41, Phe6.44, Trp6.48, Ser7.42, and Ser7.46, predicted to interact with the S1P hydrophobic tail, impaired activation by S1P. Replacing individual or multiple residues in the ligand-binding pocket of S1P(2) with S1P(1) sequence did not impart activation by FTY720P. Chimeric S1P(1)/S1P(2) receptors were generated and characterized for activation by S1P or FTY720P. The S1P(2) chimera with S1P(1) sequence from the N terminus to transmembrane domain 2 (TM2) was activated by FTY720P, and the S1P(2)(IC1-TM2)(S1P1) domain insertion chimera showed S1P(1)-like activation. Twelve residues in this domain, distributed in four motifs a-d, differ between S1P(1) and S1P(2). Insertion of (78)RPMYY in motif b alone or simultaneous swapping of five other residues in motifs c and d from S1P(1) into S1P(2) introduced FTY720P responsiveness. Molecular dynamics calculations indicate that FTY720P binding selectivity is a function of the entropic contribution to the binding free energy rather than enthalpic contributions and that preferred agonists retain substantial flexibility when bound. After exposure to FTY720P, the S1P(2)(IC1-TM2)(S1P1) receptor recycled to the plasma membrane, indicating that additional structural elements are required for the selective degradative trafficking of S1P(1).     

Integration requires a specific interaction of the donor DNA terminal 5'-cytosine with glutamine 148 of the HIV-1 integrase flexible loop

Integration is essential for retroviral replication and gene therapy using retroviral vectors. Human immunodeficiency virus, type 1 (HIV-1), integrase specifically recognizes the terminal sequences of each long terminal repeat (LTR) and cleaves the 3'-end terminal dinucleotide 5'-GT. The exposed 3'-hydroxyl is then positioned for nucleophilic attack and subsequent strand transfer into another DNA duplex (target or chromosomal DNA). We report that both the terminal cytosine at the protruding 5'-end of the long terminal repeats (5'-C) and the integrase residue Gln-148 are critical for strand transfer. Proximity of the 5'-C and Gln-148 was demonstrated by disulfide cross-linking. Cross-linking is inhibited by the inhibitor 5CITEP 1-(5-chloroindol-3-yl)-3-hydroxy-3-(2H-tetrazol-5-yl)-propenone. We propose that strand transfer requires a conformational change of the integrase-viral (donor) DNA complex with formation of an H-bond between the N-3 of the 5'-C and the amine group of Gln-148. These findings have implications for the molecular mechanisms coupling 3'-processing and strand transfer as well as for the molecular pharmacology of integrase inhibitors.     

Visions from Local Populations for Livelihood-Based Solutions to Promote Forest Conservation Sustainability in the Congo Basin

Forest management practices that aim to mitigate the threats of deforestation and forest degradation can inadvertently threaten the ability of forest-dependent local populations to meet basic daily sustenance needs. Stakeholder engagement can help find common ground between environmental goals and the livelihood needs of local populations. A starting point for local stakeholder engagement is to gather insights into how forest management differentially impacts the livelihoods and well-being of these populations, which may be quite heterogeneous in their perspectives and livelihood needs. Towards this end, we conducted semi-structured first-person interviews in forest-dependent communities in Cameroon about perspectives on and suggestions about forest resources and management. This study provides insights into commonalities and differences of perspectives within and among local populations and supports the use of stakeholder engagement strategies that facilitate bidirectional communication and take into consideration diverse perspectives and priorities.     

Liquid Exfoliated Co(OH)2 Nanosheets as Low‐Cost,Yet High‐Performance,Catalysts for the Oxygen Evolution Reaction

Identifying cheap, yet effective, oxygen evolution catalysts is critical to the advancement of water splitting. Using liquid exfoliated Co(OH)₂ nanosheets as a model system, a simple procedure is developed to maximize the activity of any oxygen evolution reaction nanocatalyst. First the nanosheet edges are confirmed as the active areas by analyzing the catalytic activity as a function of nanosheet size. This allows the authors to select the smallest nanosheets (length ≈50 nm) as the best performing catalysts. While the number of active sites per unit electrode area can be increased via the electrode thickness, this is found to be impossible beyond ≈10 µm due to mechanical instabilities. However, adding carbon nanotubes increases both toughness and conductivity significantly. These enhancements mean that composite electrodes consisting of small Co(OH)₂ nanosheets and 10 wt% nanotubes can be made into freestanding films with thickness of up to 120 µm with no apparent electrical limitations. The presence of diffusion limitations results in an optimum electrode thickness of 70 µm, yielding a current density of 50 mA cm^?2 at an overpotential of 235 mV, close to the state of the art in the field. Applying this procedure to a high‐performance catalyst such as NiFeO_x should significantly surpass the state of the art.     

Biodiversity improves the ecological design of sustainable biofuel systems

For algal biofuels to become a commercially viable and sustainable means of decreasing greenhouse gas emissions, growers are going to need to design feedstocks that achieve at least three characteristics simultaneously as follows: attain high yields; produce high quality biomass; and remain stable through time. These three qualities have proven difficult to achieve simultaneously under the ideal conditions of the laboratory, much less under field conditions (e.g., outdoor culture ponds) where feedstocks are exposed to highly variable conditions and the crop is vulnerable to invasive species, disease, and grazers. Here, we show that principles from ecology can be used to improve the design of feedstocks and to optimize their potential for “multifunctionality.” We performed a replicated experiment to test these predictions under outdoor conditions. Using 80 ponds of 1,100 L each, we tested the hypotheses that polycultures would outperform monocultures in terms of the following functions: biomass production, yield of biocrude from biomass, temporal stability, resisting population crashes, and resisting invasions by unwanted species. Overall, species richness improved stability, biocrude yield, and resistance to invasion. While this suggests that polycultures could outperform monocultures on average, invasion resistance was the only function where polycultures outperformed the best single species in the experiment. Due to tradeoffs among different functions that we measured, no species or polyculture was able to maximize all functions simultaneously. However, diversity did enhance the potential for multifunctionality—the most diverse polyculture performed more functions at higher levels than could any of the monocultures. These results are a key finding for ecological design of sustainable biofuel systems because they show that while a monoculture may be the optimal choice for maximizing short‐term biomass production, polycultures can offer a more stable crop of the desired species over longer periods of time.