Thermal aggregation of ribonuclease A. A contribution to the understanding of the role of 3D domain swapping in protein aggregation

By lyophilizing RNase A from 40% acetic acid solutions, two dimeric aggregates, the "minor" and "major" dimers (named here N-dimer and C-dimer, respectively), form by 3D domain swapping at a ratio of 1:4. Trimeric and tetrameric aggregates are also obtained. The two dimers and the higher oligomers also form without a lyophilization step. By keeping RNase A dissolved at a high concentration (generally 200 mg/ml) in various media at temperatures ranging from 23 to 70 degrees C for times varying from a few minutes to 2 h, various oligomers, in particular the two dimeric conformers, formed in quite different amounts, often inverting their relative quantities depending on the more or less severe unfolding conditions. When unfolding mainly concerned the N terminus of the protein, richer in hydrophilic residues, the N-dimer, formed by 3D domain swapping of the N-terminal alpha-helix of each monomer, prevailed over the C-dimer. Under more vigorous denaturing conditions, where also the C terminus of RNase A, richer in hydrophobic amino acids, unfolded, the C-dimer, formed by 3D domain swapping of the C-terminal beta-strand, prevailed over the other, possibly because of the induction to aggregation promoted by the hydrophobic residues present in the C termini of the two monomers.     

Density gradient centrifugation of sperm from a subfertile stallion and effect of seminal plasma addition on fertility

Stallions are not selected for fertility but for other criteria (pedigree, conformation, performances, progeny), therefore valuable but subfertile stallions with poor semen quality are frequently used in commercial breeding programs. The object of this study was to evaluate whether sperm selection through a silane-coated silica colloid gradient centrifugation, with or without the addition of seminal plasma of a high fertile stallion, could improve the pregnancy rates of an oligospermic valuable stallion in a commercial breeding program. In 2008 breeding season (experiment 1, n=104 mares), simple centrifugation and density gradient centrifugation of the sperm were compared. In 2009 and 2010 breeding seasons (experiment 2, n=125 mares), the effect of the addition of 5% seminal plasma to the extender after sperm selection was evaluated. In all mares deep horn uterine insemination was performed with 1 ml containing 50×10(6) morphologically normal progressive motile spermatozoa, 24-30 h after induction of ovulation with hCG. Pregnancy diagnosis by ultrasonography was performed 14 days following ovulation. Results showed a higher per cycle pregnancy rate (P>0.05) when sperm selection through a density gradient was used (62% vs. 42.3%, exp 1), while the addition of 5% seminal plasma did not influence the outcome (45.9% vs. 47.6%, exp 2) (P>0.05). An age-related decrease in the fertility of the stallion was observed when comparing the results from the different breeding seasons (P<0.05). In conclusion, sperm selection through a discontinuous density gradient enabled a normal per cycle pregnancy rate to be achieved from an oligospermic-subfertile stallion in a commercial breeding program, and no differences were observed regarding the addition of seminal plasma.     

Depression Dimensions: Integrating Clinical Signs and Symptoms from the Perspectives of Clinicians and Patients

Background

Several studies have recognized that depression is a multidimensional construct, although the scales that are currently available have been shown to be limited in terms of the ability to investigate the multidimensionality of depression. The objective of this study is to integrate information from instruments that measure depression from different perspectives–a self-report symptomatic scale, a clinician-rated scale, and a clinician-rated scale of depressive signs–in order to investigate the multiple dimensions underlying the depressive construct.

Methods

A sample of 399 patients from a mood disorders outpatient unit was investigated with the Beck Depression Inventory (BDI), the Hamilton Depression Rating Scale (HDRS), and the Core Assessment of Psychomotor Change (CORE). Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA) were used to investigate underlying dimensions of depression, including item level analysis with factor loadings and item thresholds.

Results

A solution of six depression dimensions has shown good-fit to the data, with no cross-loading items, and good interpretability. Item-level analysis revealed that the multidimensional depressive construct might be organized into a continuum of severity in the following ascending order: sexual, cognitive, insomnia, appetite, non-interactiveness/motor retardation, and agitation.

Conclusion

An integration of both signs and symptoms, as well as the perspectives of clinicians and patients, might be a good clinical and research alternative for the investigation of multidimensional issues within the depressive syndrome. As predicted by theoretical models of depression, the melancholic aspects of depression (non-interactiveness/motor retardation and agitation) lie at the severe end of the depressive continuum.     

BlastR--fast and accurate database searches for non-coding RNAs

We present and validate BlastR, a method for efficiently and accurately searching non-coding RNAs. Our approach relies on the comparison of di-nucleotides using BlosumR, a new log-odd substitution matrix. In order to use BlosumR for comparison, we recoded RNA sequences into protein-like sequences. We then showed that BlosumR can be used along with the BlastP algorithm in order to search non-coding RNA sequences. Using Rfam as a gold standard, we benchmarked this approach and show BlastR to be more sensitive than BlastN. We also show that BlastR is both faster and more sensitive than BlastP used with a single nucleotide log-odd substitution matrix. BlastR, when used in combination with WU-BlastP, is about 5% more accurate than WU-BlastN and about 50 times slower. The approach shown here is equally effective when combined with the NCBI-Blast package. The software is an open source freeware available from www.tcoffee.org/blastr.html.     

On the identity of dnaP and dnaF genes of Bacillus subtilis

Summary The dnaP strains of Bacillus subtilis are altered in the initiation of DNA replication at high temperature (Riva et al., 1975). Fine mapping of the gene shows that it is located very close to the dnaF gene, described by Karamata and Gross (1970) and mapped by Love et al. (1976) in the polC region. The phenotype of both mutants is indistinguishable: the DNA synthesis stops at non permissive temperature after synthesizing an amount of DNA equivalent to the completion of the rounds of replication already initiated; at permissive temperature they are abnormally sensitive to MMS and are reduced in the ability to be transformed. Both mutants are to be considered as belonging to the dnaF locus.The dnaF gene is very close to the polC gene, which specifies the DNA polymerase III of B. subtilis. The DNA polymerase III of the dnaF mutants is not temperature sensitive in vitro, however, the level of this enzyme is lower by a factor of 4 or 5 in the dnaF mutants, at the permissive temperature. Following shift of dnaF cultures to the non permissive temperature, the level of DNA polymerase III activity specifically decreases further by a factor of at least 10 in the mutant, whereas the DNA polymerase I level is unaffected.The possible roles of the dnaF gene in the control of the cellular level of the DNA polymerase III, and the possibility of a regulatory role of DNA polymerase III in the initiation of DNA replication in bacteria are discussed.Abbreviations and symbols HPUra 6-(p-hydroxyphenylazo)-uracil; mic, minimum inhibitory concentration - MMS methyl-methanesufonate - Pol I Pol II and Pol III: DNA polymerase I, II and III respectively - PCMB parachloro-mercuri-benzoate     

Tree-ring wood anatomy and stable isotopes show structural and functional adjustments in olive trees under different water availability

Background and Aims

Olive tree (Olea europaea L.) is a drought-tolerant tree species cultivated in Mediterranean-type environments. Although it is tolerant to drought, dry conditions decrease its productivity. A thorough analysis of the hydraulic architecture and wood anatomical plasticity, as well as of their physiological significance, is needed to understand how olive trees will adapt to the predicted increase in frequency and severity of drought in the Mediterranean region.

Methods

Dendrochronological, stable isotopic (δ¹³C, δ¹⁸O) and wood anatomical analyses were applied to understand how different water availability can affect wood stem structure and function, in rainfed and irrigated at 100 % of crop evapotranspiration (ETc) olive trees in an experimental orchard close to Benevento (Italy) from 1992 to 2009.

Results

Dendrochronological data indicate that cross-dating and synchronization of ring-width time series in olive tree is possible. After the start of irrigation, significantly more negative δ¹³C and lower δ¹⁸O values were recorded in irrigated trees indicating higher stomatal conductance and transpiration rates. Increased water balance induced the formation of a higher number of vessels with higher diameter.

Conclusions

Water balance variations affected wood anatomy and isotopic composition. Anatomical analyses detected structural and functional adjustments in rainfed trees that produced more vessels with lower diameter to prevent cavitation. Isotopic analyses confirmed that irrigated trees continuously showed enhanced transpiration rates.     

Patch-Clamp Fluorometry: Electrophysiology meets Fluorescence

Ion channels and transporters are membrane proteins whose functions are driven by conformational changes. Classical biophysical techniques provide insight into either the structure or the function of these proteins, but a full understanding of their behavior requires a correlation of both these aspects in time. Patch-clamp and voltage-clamp fluorometry combine spectroscopic and electrophysiological techniques to simultaneously detect conformational changes and ionic currents across the membrane. Since its introduction, patch-clamp fluorometry has been responsible for invaluable advances in our knowledge of ion channel biophysics. Over the years, the technique has been applied to many different ion channel families to address several biophysical questions with a variety of spectroscopic approaches and electrophysiological configurations. This review illustrates the strength and the flexibility of patch-clamp fluorometry, demonstrating its potential as a tool for future research.     

Nucleo-cytoplasmic transport as a therapeutic target of cancer

Shuttling of specific proteins out of the nucleus is essential for the regulation of the cell cycle and proliferation of both normal and malignant tissues. Dysregulation of this fundamental process may affect many other important cellular processes such as tumor growth, inflammatory response, cell cycle, and apoptosis. It is known that XPO1 (Exportin-1/Chromosome Region Maintenance 1/CRM1) is the main mediator of nuclear export in many cell types. Nuclear proteins exported to the cytoplasm by XPO1 include the drug targets topoisomerase IIα (topo IIα) and BCR-ABL and tumor suppressor proteins such as Rb, APC, p53, p21, and p27. XPO1 can mediate cell proliferation through several pathways: (i) the sub-cellular localization of NES-containing oncogenes and tumor suppressor proteins, (ii) the control of the mitotic apparatus and chromosome segregation, and (iii) the maintenance of nuclear and chromosomal structures. The XPO1 protein is elevated in ovarian carcinoma, glioma, osteosarcoma, pancreatic and cervical cancer. There is a growing body of research indicating that XPO1 may have an important role as a prognostic marker in solid tumors. Because of this, nuclear export inhibition through XPO1 is a potential target for therapeutic intervention in many cancers. The best understood XPO1 inhibitors are the small molecule nuclear export inhibitors (NEIs; Leptomycin B and derivatives, ratjadones, PKF050-638, valtrate, ACA, CBS9106, selinexor/KPT-330, and verdinexor/KPT-335). Selinexor and verdinexor are orally bioavailable, highly potent, small molecules that are classified as Selective Inhibitors of Nuclear Export (SINE). KPT-330 is the only NEI currently in Phase I/II human clinical trials in hematological and solid cancers. Of all the potential targets in nuclear cytoplasmic transport, the nuclear export receptor XPO1 remains the best understood and most advanced therapeutic target for the treatment of cancer.