Determination of the diadic composition of alginate by means of circular dichroism: a fast and accurate improved method

Circular dichroism (CD) is presented as a reliable and sensitive method of determining the diadic frequency composition of alginate (F(GG), F(MM) and F(GM+MG)). The availability of samples, very largely or even completely conforming to the limiting structures of polymannuronate (MM)(n), polyguluronate (GG)(n) and polyalternating MG (MG)(n), respectively, allowed the limiting CD spectra for each alginate diad to be obtained. These showed very different CD behaviour, thus pointing out the crucial importance of the neighbouring residue in chiroptical properties. Using an iterative best-fit procedure, the diadic composition of commercial alginates could be obtained from their respective CD spectra by means of a linear combination of the spectra of the three limiting diads. The results were found in excellent agreement with the composition parameters obtained by 1H NMR spectroscopy.     

Influence of environmental conditions on the activity of the recombinant mannuronan C-5-epimerase AlgE2

The mannuronan C-5-epimerase AlgE2 is one of a family of Ca(2+)-dependent epimerases secreted by Azotobacter vinelandii. These enzymes catalyze the conversion of beta-D-mannuronic acid residues (M) to alpha-L-guluronic acid residues (G) in alginate. AlgE2 had a pH optimum between 6.5 and 7 and a temperature optimum around 55 degrees C. Addition of low molecular weight organic compounds, including buffers, amino acids and osmoprotective compounds, affected the activity of the enzyme. The charge, size and stereochemistry of the added compounds were important. The activity of AlgE2, dissolved in various buffers (same pH), decreased with increasing fraction of positively charged buffer ions. Mono- and divalent metal ions also influenced the activity. When Ca(2+) was omitted only Sr(2+), of the metal ions tested, supported some activity of AlgE2. At high concentration of Ca(2+) (3.3 mM) these ions had a negative effect on the activity, whereas at low Ca(2+) concentration (0.58 mM) the activity was enhanced by addition of Sr(2+), and to some degree also by addition of Mg(2+) and Mn(2+). During epimerization AlgE2 occasionally causes cleavage of the alginate chain. These chain breaks could not be prevented by changes in the conditions during the epimerization. The composition and sequential structure of epimerized alginate was not altered by changes in the epimerization conditions.     

A complementary bioinformatics approach to identify potential plant cell wall glycosyltransferase-encoding genes

Plant cell wall (CW) synthesizing enzymes can be divided into the glycan (i.e. cellulose and callose) synthases, which are multimembrane spanning proteins located at the plasma membrane, and the glycosyltransferases (GTs), which are Golgi localized single membrane spanning proteins, believed to participate in the synthesis of hemicellulose, pectin, mannans, and various glycoproteins. At the Carbohydrate-Active enZYmes (CAZy) database where e.g. glucoside hydrolases and GTs are classified into gene families primarily based on amino acid sequence similarities, 415 Arabidopsis GTs have been classified. Although much is known with regard to composition and fine structures of the plant CW, only a handful of CW biosynthetic GT genes-all classified in the CAZy system-have been characterized. In an effort to identify CW GTs that have not yet been classified in the CAZy database, a simple bioinformatics approach was adopted. First, the entire Arabidopsis proteome was run through the Transmembrane Hidden Markov Model 2.0 server and proteins containing one or, more rarely, two transmembrane domains within the N-terminal 150 amino acids were collected. Second, these sequences were submitted to the SUPERFAMILY prediction server, and sequences that were predicted to belong to the superfamilies NDP-sugartransferase, UDP-glycosyltransferase/glucogen-phosphorylase, carbohydrate-binding domain, Gal-binding domain, or Rossman fold were collected, yielding a total of 191 sequences. Fifty-two accessions already classified in CAZy were discarded. The resulting 139 sequences were then analyzed using the Three-Dimensional-Position-Specific Scoring Matrix and mGenTHREADER servers, and 27 sequences with similarity to either the GT-A or the GT-B fold were obtained. Proof of concept of the present approach has to some extent been provided by our recent demonstration that two members of this pool of 27 non-CAZy-classified putative GTs are xylosyltransferases involved in synthesis of pectin rhamnogalacturonan II (J. Egelund, B.L. Petersen, A. Faik, M.S. Motawia, C.E. Olsen, T. Ishii, H. Clausen, P. Ulvskov, and N. Geshi, unpublished data).     

Galactose-substituted alginate 2: conformational aspects

Galactose moieties have been introduced on the uronic groups of alginates from different sources via an N-glycosidic bond, thus affecting the net charge on the polymer chain. The modified polymers have been analyzed by means of viscosity and of high-performance size-exclusion chromatography combined with refractive index multiple angle laser light scattering (HPSEC-RI-MALLS) measurements. The latter technique enabled us to determine the molecular weight of the modified polymers, proving that the synthetic procedure did not affect the chemical integrity of the chain. The intrinsic viscosity and the radius of gyration data showed that the hydrodynamic properties of the polymer chain varied with the degree and the pattern of substitution. In the presence of a relatively low galactose content (up to 19%), a decrease of the hydrodynamic dimensions of the coil was experienced, while on increasing the degree of substitution (especially on GG diads) a re-extension of the chain was discovered. Measurements of intrinsic viscosity at different values of the degree of dissociation have demonstrated that this effect cannot be solely explained by the reduction of the charge density of the polymer. Rather, it implies the occurrence of conformational changes of the chain that are specific to the chemical nature of the site of substitution. These data have been supported by the values of the persistence length of the natural and modified polymers obtained with the Doty-Benoit equation. The chiro-optical properties of the modified polymers studied by means of circular dichroism (CD) spectroscopy confirmed that conformational variations occurred to the polymeric chain upon introduction of galactose residues.     

Single-molecular pair unbinding studies of Mannuronan C-5 epimerase AlgE4 and its polymer substrate

Alginate biosynthesis involves C-5-mannuronan epimerases catalyzing the conversion of beta-D-mannuronic acid to alpha-L-guluronic acid at the polymer level. Mannuronan epimerases are modular enzymes where the various modules yield specific sequential patterns of the converted residues in their polymer products. Here, the interaction between the AlgE4 epimerase and mannuronan is determined by dynamic force spectroscopy. The specific unbinding between molecular pairs of mannuronan and AlgE4 as well as its two modules, A and R, respectively, was studied as a function of force loading rate. The mean protein-mannuronan unbinding forces were determined to be in the range 73-144 pN, depending on the protein, at a loading rate of 0.6 nN/s, and increased with increasing loading rate. The position of the activation barrier was determined to be 0.23 +/- 0.04 nm for the AlgE4 and 0.10 +/- 0.02 nm for its A-module. The lack of interaction observed between the R-module and mannuronan suggest that the A-module contains the binding site for the polymer substrate. The ratio between the epimerase-mannuronan dissociation rate and the catalytic rate for epimerization of single hexose residues suggests a processive mode of action of the AlgE4 epimerase yielding the observed sequence pattern in the uronan associated with the A-module of this enzyme.     

Proteolytic activity and reduction of gliadin-like fractions by sourdough lactobacilli

AIMS: To characterize the peptide hydrolase system of Lactobacillus plantarum CRL 759 and CRL 778 and evaluate their proteolytic activity in reducing gliadin-like fractions. METHODS AND RESULTS: The intracellular peptide hydrolase system of Lact. plantarum CRL 759 and CRL 778 involves amino-, di- (DP), tri- (TP) and endopeptidase activities. These peptidases are metalloenzymes inhibited by EDTA and 1,10-phenanthroline and stimulated by Co2+. DP and TP activities of Lact. plantarum CRL 759 and CRL 778, respectively, were completely inhibited by Cu2+. Lactobacillus plantarum CRL 778 showed the highest proteolytic activity and amino acids release in fermented dough. The synthetic 31-43 alpha-gliadin fragment was hydrolysed to 36% and 73% by Lact. plantarum CRL 778 and CRL 759 respectively. CONCLUSIONS: Lactobacillus plantarum CRL 759 and CRL 778 have an active proteolytic system, which is responsible for the high amino acid release during sourdough fermentation and the hydrolysis of the 31-43 alpha-gliadin-like fragment. SIGNIFICANCE AND IMPACT OF THE STUDY: This work provides new information of use when obtaining sourdough starters for bread making. Moreover, knowledge regarding lactobacilli capable of reducing the level of gliadin-like fractions, a toxic peptide for coeliac patients, has a beneficial health impact.     

Mapping enzymatic functionalities of mannuronan C-5 epimerases and their modular units by dynamic force spectroscopy

Alginates are (1→4)-linked structural copolyuronans consisting of β-d-mannuronic acid (M) and its C-5 epimer -l-guluronic acid (G). The residue sequence variation is introduced in a unique postpolymerisation step catalysed by a family of C-5 epimerases named AlgE enzymes. The seven known AlgE’s are composed of two modules, designated A and R, present in different number. The molecular details of the structure–function relationship of these seven epimerases, introducing specific residue sequences, are not understood. In this study, single-molecular pair interactions between alginate and AlgE enzymes were investigated using dynamic force spectroscopy. The AlgE enzymes AlgE4 and AlgE6, the recombinant construct PKA1 composed of A- and R-modules from various AlgE’s, as well as separate R- and A-modules were studied. The strength of the protein–mannuronan interaction, when applying a loading rate of 0.6 nN/s, varied from 73 pN (AlgE4) to 144 pN (A-module). The determined potential width, that is, the distance from the activation barrier to the bound substrate molecule, was 0.23 nm for AlgE4, 0.19 nm for AlgE6 and 0.1 nm for the A-module. No attraction was observed between the R-module and the substrate. The observations indicate that the A-module contains the substrate binding site and that the R-module modulates the enzyme–substrate binding strength. The observed AlgE4-polymer residence times, two orders of magnitude longer than expected from k_cat reported for AlgE4, not observed for PKA1, led us to propose a processive mode of action of AlgE4.     

Biophysical consequences of remodeling the neutral side chains of rhamnogalacturonan I in tubers of transgenic potatoes

Two lines of transgenic potato (Solanum tuberosum L.) plants modified in their cell wall structure were characterized and compared to wild type with regard to biomechanical properties in order to assign functional roles to the particular cell wall polysaccharides that were targeted by the genetic changes. The targeted polymer was rhamnogalacturonan I (RG-I), a complex pectic polysaccharide comprised of mainly neutral oligosaccharide side chains attached to a backbone of alternating rhamnosyl and galacturonosyl units. Tuber rhamnogalacturonan I molecules from the two transformed lines are reduced in linear galactans and branched arabinans, respectively. The transformed tuber tissues were found to be more brittle when subjected to uniaxial compression and the side-chain truncation was found to be correlated with the physical properties of the tissue. Interpretation of the force–deflection curves was aided by a mathematical model that describes the contribution of the cellulose microfibrils, and the results lead to the proposition that the pectic matrix plays a role in transmitting stresses to the load-bearing cellulose microfibrils and that even small changes to the rheological properties of the matrix have consequences for the biophysical properties of the wall.     

Sensitivity to growth suppression by 1alpha,25-dihydroxyvitamin D(3) among MCF-7 clones correlates with Vitamin D receptor protein induction

The antiproliferative effect of 1alpha,25-dihydroxyvitamin D(3) (1alpha,25(OH)(2)D(3)) has been studied for a decade in diverse model systems, but the signalling pathways linking 1alpha,25(OH)(2)D(3) to cell cycle arrest remains unclear. In our attempt to establish a model system which would allow further identification of important players in the process of the 1alpha,25(OH)(2)D(3) imposed cell cycle arrest, we have isolated derivatives of the human breast cancer cell line MCF-7 and chosen two nearly 1alpha,25(OH)(2)D(3) resistant and two hypersensitive sub-clones. Investigation of cell cycle proteins regulated by 1alpha,25(OH)(2)D(3) in these clones indicates that activation of one component/pathway is responsible for the linkage between 1alpha,25(OH)(2)D(3) and growth arrest. Protein levels of the Vitamin D receptor (VDR) were elevated in sensitive cells upon 1alpha,25(OH)(2)D(3) treatment, whereas resistant clones were unable to induce VDR upon 1alpha,25(OH)(2)D(3) treatment. Our data show that VDR protein levels and the ability of a cell to induce VDR upon 1alpha,25(OH)(2)D(3) treatment correlate with the antiproliferative effects of 1alpha,25(OH)(2)D(3), and suggest that the level of VDR in cancer cells might serve as a prognostic marker for treatment of cancer with 1alpha,25(OH)(2)D(3) analogues.     

Alginate as immobilization material: I. Correlation between chemical and physical properties of alginate gel beads

Calcium alginate gel beads were prepared from a range of well characterized alginates. The physical properties of beads depended strongly on the composition, sequential structure, and molecular size of the polymers. Beads with the highest mechanical strength, lowest shrinkage, best stability towards monovalent cations, and highest porosity were made from alginate with a content of L-guluronic acid higher than 70% and an average length of the G-blocks higher than 15. For these "high G" alginates the critical overlap intrinsic viscosities have been determined, and for molecular weight higher than 2.4 x 10(5), the gel strength was independent of the molecular weight.