Determination of volatile substances in olives and their effect on reproduction of the olive fruit fly

Females of the olive fruit fly Bactrocera oleae lay their eggs in olives mainly using fruit volatile stimuli. Using GC-MS analysis, we determined the chemical composition of the volatile blend emitted from field-collected olive fruit of cv. Megaritiki, at different stages of maturity. GC-MS analysis demonstrated qualitative and quantitative differences in the headspace blend emitted by the olive fruit. Certain chemicals such as toluene, n-octane, α-pinene, limonene, ethyl hexanol, nonanal n-dodecane, decanal and n-tetradecane were detected in greater amounts, irrespective of the growth stage of the fruit. The flies’ exposure to a number of these chemicals, such as n-octane and α-pinene, as well as to a mixture consisting of n-octane, α-pinene, limonene, ethyl hexanol, nonanal, n-dodecane, decanal and n–tetradecane favoured successful mating and egg production. The results may contribute to the improvement of the mass rearing of the fly, through these findings, which illustrate the positive effect that certain fruit volatile chemicals have on the fly's reproduction and offer a better understanding of the relation between the fly and the host fruit.     

New insights into the properties of pubescent surfaces: peach fruit as a model

The surface of peach (Prunus persica 'Calrico') is covered by a dense indumentum, which may serve various protective purposes. With the aim of relating structure to function, the chemical composition, morphology, and hydrophobicity of the peach skin was assessed as a model for a pubescent plant surface. Distinct physicochemical features were observed for trichomes versus isolated cuticles. Peach cuticles were composed of 53% cutan, 27% waxes, 23% cutin, and 1% hydroxycinnamic acid derivatives (mainly ferulic and p-coumaric acids). Trichomes were covered by a thin cuticular layer containing 15% waxes and 19% cutin and were filled by polysaccharide material (63%) containing hydroxycinnamic acid derivatives and flavonoids. The surface free energy, polarity, and work of adhesion of intact and shaved peach surfaces were calculated from contact angle measurements of water, glycerol, and diiodomethane. The removal of the trichomes from the surface increased polarity from 3.8% (intact surface) to 23.6% and decreased the total surface free energy chiefly due to a decrease on its nonpolar component. The extraction of waxes and the removal of trichomes led to higher fruit dehydration rates. However, trichomes were found to have a higher water sorption capacity as compared with isolated cuticles. The results show that the peach surface is composed of two different materials that establish a polarity gradient: the trichome network, which has a higher surface free energy and a higher dispersive component, and the cuticle underneath, which has a lower surface free energy and higher surface polarity. The significance of the data concerning water-plant surface interactions is discussed within a physiological context.     

Economic Recession and Emergence of an HIV-1 Outbreak among Drug Injectors in Athens Metropolitan Area: A Longitudinal Study

Background

During 2011, a dramatic increase (1600%) of reported HIV-1 infections among injecting drug users (IDUs) was noted in Athens, Greece. We herein assess the potential causal pathways associated with this outbreak.

Methods

Our study employed high resolution HIV-1 phylogenetic and phylogeographic analyses. We examined also longitudinal data of ecological variables such as the annual growth of gross domestic product (GDP) of Greece in association with HIV-1 and HCV sentinel prevalence in IDUs, unemployment and homelessness rates and HIV transmission networks in Athens IDUs before and during economic recession (2008–2012).

Results

IDU isolates sampled in 2011 and 2012 suggested transmission networks in 94.6% and 92.7% of the cases in striking contrast with the sporadic networking (5%) during 1998–2009. The geographic origin of most HIV-1 isolates was consistent with the recently documented migratory waves in Greece. The decline in GDP was inversely correlated with annual prevalence rates of HIV and HCV and with unemployment and homelessness rates in IDUs (all p<0.001). The slope of anti-HCV prevalence in the sentinel populations of IDUs and in “new” drug injectors was found 120 and 1.9-fold (p = 0.007, p = 0.08 respectively) higher in 2008–2012 (economic recession) compared with 2002–2006. The median (25th, 75th) size of transmission networks were 34 (12, 58) and 2 (2, 2) (p = 0.057) in 2008–2012 and 1998–2007, respectively. The coverage of harm reduction services was low throughout the study period.

Conclusions

Scaling-up harm reduction services and addressing social and structural factors related to the current economic crisis should be urgently considered in environments where HIV-1 outbreaks may occur.     

Life cycle assessment of emerging technologies at the lab scale: The case of nanowire‐based solar cells

Nanomaterials are expected to play an important role in the development of sustainable products. The use of nanomaterials in solar cells has the potential to increase their conversion efficiency. In this study, we performed a life cycle assessment (LCA) for an emerging nanowire‐based solar technology. Two lab‐scale manufacturing routes for the production of nanowire‐based solar cells have been compared—the direct growth of GaInP nanowires on silicon substrate and the growth of InP nanowires on native substrate, peel off, and transfer to silicon substrate. The analysis revealed critical raw materials and processes of the current lab‐scale manufacturing routes such as the use of trifluoromethane (CHF₃), gold, and an InP wafer and a stamp, which are used and discarded. The environmental performance of the two production routes under different scenarios has been assessed. The scenarios include the use of an alternative process to reduce the gold requirements—electroplating instead of metallization, recovery of gold, and reuse of the InP wafer and the stamp. A number of suggestions, based on the LCA results—including minimization of the use of gold and further exploration for upscaling of the electroplating process, the increase in the lifetimes of the wafer and the stamp, and the use of fluorine‐free etching materials—have been communicated to the researchers in order to improve the environmental performance of the technology. Finally, the usefulness and limitations of lab‐scale LCA as a tool to guide the sustainable development of emerging technologies are discussed.     

Evaluation of the repeatability of ultra-performance liquid chromatography-TOF-MS for global metabolic profiling of human urine samples

The application of reversed-phase ultra-performance liquid chromatography, based on the use of sub 2 microm particles, combined with time-of-flight mass spectrometry has been investigated for the production of global metabolite profiles from human urine. The stability and repeatability of the methodology, which employed gradient elution, was determined by the repeat analysis of a pooled quality control (QC) sample. As seen in previous studies conducted with conventional LC-MS an element of system conditioning was required to obtain reproducible data, as the initial injections were unrepresentative. However, once the system had equilibrated excellent repeatability in terms of retention time, signal intensity and mass accuracy was seen providing confidence that for this matrix, the within-day repeatability of UPLC-TOF-MS was sufficient to assure data quality in global metabolic profiling applications.     

Life History,Reproduction, Growth,Population Dynamics and Production of Gammarus aequicauda (Crustacea: Amphipoda) at Extremely Low Salinities in a Mediterranean Lagoon

Aspects of the biology of Gammarus aequicauda were studied at extremely low salinities (0.3–5.7 psu) in Monolimni Lagoon, N. Aegean Sea. Samples were collected monthly from February 1998 to February 1999. Breeding occurred continuously but peaked in late spring, late summer and autumn and three cohorts were produced. The spring and summer cohorts showed fast growth (0.15 mm d^–1), accelerated maturity and life span of about three and seven months respectively, while the overwintering cohort showed a life span of about nine months. The largest individual had a body length of 23.6 mm. Mean brood size was 54.5 early embryos, while the intramarsupial loss was 46%. Population density sharply increased in late spring, summer and autumn. Secondary production calculated by Hynes' method gave a mean annual density of 1077.4 ind. m^–2, a mean annual crop (B) of 2.93 g DW m^–2, an annual production (P) of 35.03 g DW m^–2 and a P: B ratio of 11.96. Gammarus aequicauda showed a life‐history pattern similar to those previously reported for this species at higher salinity environments with comparatively large final body length and high growth rate during summer, brood size and P: B ratio, but with high embryo loss as well. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Simulation of intrafollicular conditions prevents GVBD in bovine oocytes: a better alternative to affect their developmental capacity after two-step culture

To increase the developmental competence of bovine oocytes isolated from small, medium, and large follicles (2-3, 3-4, and 4-6 mm in diameter, respectively), we tried to modify the conditions for their in vitro culture. The first step involved conditions maintaining at least for 48 hr a reversible inhibition of the germinal vesicle breakdown (GVBD) and the second step stimulated the resumption of meiosis and completion of nuclear and cytoplasmic maturation during the subsequent 20-22 hr of culture. The effectiveness of this model depended mainly on the medium composition (reduced NaHCO3, substitution of serum with serum albumin, addition of antioxidants (curcumin), increased viscosity by agar, the reduction of oxygen concentration (within 6%-8%), the reduction of the proportion between the number of cumulus-oocyte complexes (COCs), and the reduction of the amount of a medium (within 6-7 mul per COC) to amplify the GVBD-inhibitory effect of oocyte surrounding granulosa cells. The COCs were incubated in clumps of 6-7 COCs. The effectiveness and reversibility of GVBD inhibition depended also on the duration of COCs isolation. The full reversibility of the GV block was controlled morphologically and also by measuring histone H1 and MAP kinase activities. The two-step versus one-step (24 hr) maturation technique was evaluated by the percentage of total and hatched blastocysts at day 9. When compared with one-step maturation, the two-step culture showed a slightly increased proportion of total and hatched blastocysts developed from growing follicles, mainly from the smallest category (13.9% vs. 7.1% and 9.2% vs. 3.3% for total blastocysts and hatched, respectively). However, the two-step culture of oocytes from large regressing follicles substantially reduced the blastocyst yield (9.7% vs. 39.1% and 4.9% vs. 26.7% for total blastocysts and hatched, respectively). The transfer of ten blastocysts (developed after two-step culture) to ten recipients resulted in seven pregnancies.     

Computational optimization of the SARS-CoV-2 receptor-binding-motif affinity for human ACE2

The coronavirus severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which is responsible for the coronavirus disease 2019 pandemic, and the closely related SARS-CoV coronavirus enter cells by binding at the human angiotensin converting enzyme 2 (hACE2). The stronger hACE2 affinity of SARS-CoV-2 has been connected with its higher infectivity. In this work, we study hACE2 complexes with the receptor-binding domains (RBDs) of the human SARS-CoV-2 and human SARS-CoV viruses, using all-atom molecular dynamics simulations and computational protein design with a physics-based energy function. The molecular dynamics simulations identify charge-modifying substitutions between the CoV-2 and CoV RBDs, which either increase or decrease the hACE2 affinity of the SARS-CoV-2 RBD. The combined effect of these mutations is small, and the relative affinity is mainly determined by substitutions at residues in contact with hACE2. Many of these findings are in line and interpret recent experiments. Our computational protein design calculations redesign positions 455, 493, 494, and 501 of the SARS-CoV-2 receptor binding motif, which contact hACE2 in the complex and are important for ACE2 recognition. Sampling is enhanced by an adaptive importance sampling Monte Carlo method. Sequences with increased affinity replace CoV-2 glutamine by a negative residue at position 493; serine by a nonpolar or aromatic residue or an asparagine at position 494; and asparagine by valine or threonine at position 501. Substitutions at positions 455 and 501 have a smaller effect on affinity. Substitutions suggested by our design are seen in viral sequences encountered in other species, including bat and pangolin. Our results might be used to identify potential virus strains with higher human infectivity and assist in the design of peptide-based or peptidomimetic compounds with the potential to inhibit SARS-CoV-2 binding at hACE2.     

In vivo Near Infrared Fluorescence (NIRF) Intravascular Molecular Imaging of Inflammatory Plaque,a Multimodal Approach to Imaging of Atherosclerosis

The vascular response to injury is a well-orchestrated inflammatory response triggered by the accumulation of macrophages within the vessel wall leading to an accumulation of lipid-laden intra-luminal plaque, smooth muscle cell proliferation and progressive narrowing of the vessel lumen. The formation of such vulnerable plaques prone to rupture underlies the majority of cases of acute myocardial infarction. The complex molecular and cellular inflammatory cascade is orchestrated by the recruitment of T lymphocytes and macrophages and their paracrine effects on endothelial and smooth muscle cells.¹Molecular imaging in atherosclerosis has evolved into an important clinical and research tool that allows in vivo visualization of inflammation and other biological processes. Several recent examples demonstrate the ability to detect high-risk plaques in patients, and assess the effects of pharmacotherapeutics in atherosclerosis.⁴ While a number of molecular imaging approaches (in particular MRI and PET) can image biological aspects of large vessels such as the carotid arteries, scant options exist for imaging of coronary arteries.² The advent of high-resolution optical imaging strategies, in particular near-infrared fluorescence (NIRF), coupled with activatable fluorescent probes, have enhanced sensitivity and led to the development of new intravascular strategies to improve biological imaging of human coronary atherosclerosis.Near infrared fluorescence (NIRF) molecular imaging utilizes excitation light with a defined band width (650-900 nm) as a source of photons that, when delivered to an optical contrast agent or fluorescent probe, emits fluorescence in the NIR window that can be detected using an appropriate emission filter and a high sensitivity charge-coupled camera. As opposed to visible light, NIR light penetrates deeply into tissue, is markedly less attenuated by endogenous photon absorbers such as hemoglobin, lipid and water, and enables high target-to-background ratios due to reduced autofluorescence in the NIR window. Imaging within the NIR ''window'' can substantially improve the potential for in vivo imaging.^2,5Inflammatory cysteine proteases have been well studied using activatable NIRF probes¹⁰, and play important roles in atherogenesis. Via degradation of the extracellular matrix, cysteine proteases contribute importantly to the progression and complications of atherosclerosis⁸. In particular, the cysteine protease, cathepsin B, is highly expressed and colocalizes with macrophages in experimental murine, rabbit, and human atheromata.^3,6,7 In addition, cathepsin B activity in plaques can be sensed in vivo utilizing a previously described 1-D intravascular near-infrared fluorescence technology⁶, in conjunction with an injectable nanosensor agent that consists of a poly-lysine polymer backbone derivatized with multiple NIR fluorochromes (VM110/Prosense750, ex/em 750/780nm, VisEn Medical, Woburn, MA) that results in strong intramolecular quenching at baseline.¹⁰ Following targeted enzymatic cleavage by cysteine proteases such as cathepsin B (known to colocalize with plaque macrophages), the fluorochromes separate, resulting in substantial amplification of the NIRF signal. Intravascular detection of NIR fluorescence signal by the utilized novel 2D intravascular NIRF catheter now enables high-resolution, geometrically accurate in vivo detection of cathepsin B activity in inflamed plaque. In vivo molecular imaging of atherosclerosis using catheter-based 2D NIRF imaging, as opposed to a prior 1-D spectroscopic approach,⁶ is a novel and promising tool that utilizes augmented protease activity in macrophage-rich plaque to detect vascular inflammation.^11,12 The following research protocol describes the use of an intravascular 2-dimensional NIRF catheter to image and characterize plaque structure utilizing key aspects of plaque biology. It is a translatable platform that when integrated with existing clinical imaging technologies including angiography and intravascular ultrasound (IVUS), offers a unique and novel integrated multimodal molecular imaging technique that distinguishes inflammatory atheromata, and allows detection of intravascular NIRF signals in human-sized coronary arteries.Download video file.^{(61M, mov)}     

A peptide corresponding to the C-terminal region of pleiotrophin inhibits angiogenesis in vivo and in vitro

Pleiotrophin (PTN) is a heparin-binding growth factor that plays a significant role in tumor growth and angiogenesis. We have previously shown that in order for PTN to induce migration of endothelial cells, binding to both α(ν) β(3) integrin and its receptor protein tyrosine phosphatase beta/zeta (RPTPβ/ζ) is required. In the present study we show that a synthetic peptide corresponding to the last 25 amino acids of the C-terminal region of PTN (PTN(112-136) ) inhibited angiogenesis in the in vivo chicken embryo chorioallantoic membrane (CAM) assay and PTN-induced migration and tube formation of human endothelial cells in vitro. PTN(112-136) inhibited binding of PTN to α(ν) β(3) integrin, and as shown by surface plasmon resonance (SPR) measurements, specifically interacted with the specificity loop of the extracellular domain of β(3) . Moreover, it abolished PTN-induced FAK Y397 phosphorylation, similarly to the effect of a neutralizing α(ν) β(3) -selective antibody. PTN(112-136) did not affect binding of PTN to RPTPβ/ζ in endothelial cells and induced β(3) Y773 phosphorylation and ERK1/2 activation to a similar extent with PTN. This effect was inhibited by down-regulation of RPTPβ/ζ by siRNA or by c-src inhibition, suggesting that PTN(112-136) may interact with RPTPβ/ζ. NMR spectroscopy studies showed that PTN(112-136) was characterized by conformational flexibility and absence of any element of secondary structure at room temperature, although the biologically active peptide segment 123-132 may adopt a defined structure at lower temperature. Collectively, our data suggest that although PTN(112-136) induces some of the signaling pathways triggered by PTN, it inhibits PTN-induced angiogenic activities through inhibition of PTN binding to α(ν) β(3) integrin.