Environmental trade-offs across cascading lithium-ion battery life cycles

Purpose

The purpose of this study was to analyze the environmental trade-offs of cascading reuse of electric vehicle (EV) lithium-ion batteries (LIBs) in stationary energy storage at automotive end-of-life.

Methods

Two systems were jointly analyzed to address the consideration of stakeholder groups corresponding to both first (EV) and second life (stationary energy storage) battery applications. The environmental feasibility criterion was defined by an equivalent-functionality lead-acid (PbA) battery. A critical methodological challenge addressed was the allocation of environmental impacts associated with producing LIBs across the EV and stationary use systems. The model also tested sensitivity to parameters such as the fraction of battery cells viable for reuse, service life of refurbished cells, and PbA battery efficiency.

Results and discussion

From the perspective of EV applications, cascading reuse of an LIB in stationary energy storage can reduce net cumulative energy demand and global warming potential by 15 % under conservative estimates and by as much as 70 % in ideal refurbishment and reuse conditions. When post-EV LIB cells were compared directly to a new PbA system for stationary energy storage, the reused cells generally had lower environmental impacts, except in scenarios where very few of the initial battery cells and modules could be reused and where reliability was low (e.g., life span of 1 year or less) in the secondary application.

Conclusions

These findings demonstrate that EV LIB reuse in stationary application has the potential for dual benefit—both from the perspective of offsetting initial manufacturing impacts by extending battery life span as well as avoiding production and use of a less-efficient PbA system. It is concluded that reuse decisions and diversion of EV LIBs toward suitable stationary applications can be based on life cycle centric studies. However, technical feasibility of these systems must still be evaluated, particularly with respect to the ability to rapidly analyze the reliability of EV LIB cells, modules, or packs for refurbishment and reuse in secondary applications.

     

Significance and limitations of first generation biofuels

Formerly on the margins of the European agricultural landscape, liquid biofuels for transport have recently come into sharp focus with the help of three drivers: the depletion of oil resources and the political motto of energy independence, international negotiations on climate, and finally - in Europe at least - the overhaul of the common agricultural policy underpinning the need to diversify this sector. This political purpose has led to aggressive development targets in both Europe and the United States, implying a nearly ten-fold increase of biofuel production within ten years. This article introduces the current biofuel production technologies (so-called ;first generation'), whose common marker is the reliance on the storage organs of agricultural plants. This implies a relatively strong demand in arable areas, along with only moderately positive energy and environmental advantages compared to fossil fuels. 'Second generation' biofuels, which are based on generic biomass (ligno-cellulose) are expected to overcome these limitations, but will not be deployed on the market for another ten years.     

Dendritic cells: driving the differentiation programme of T cells in viral infections

Protective immunity against viral pathogens depends on the generation and maintenance of a small population of memory CD8(+) T cells. Successful memory cell generation begins with early interactions between na?ve T cell and dendritic cells (DCs) within the inflammatory milieu of the secondary lymphoid tissues. Recent insights into the role of different populations of DCs, and kinetics of antigen presentation, during viral infections have helped to understand how DCs can shape the immune response. Here, we review the recent progress that has been made towards defining how specific DC subsets drive effector CD8(+) T-cell expansion and differentiation into memory cells. Further, we endeavour to examine how the molecular signals imparted by DCs coordinate to generate protective CD8(+) T-cell immunity.     

The metal dependence of pyoverdine interactions with its outer membrane receptor FpvA

To acquire iron, Pseudomonas aeruginosa secretes the fluorescent siderophore pyoverdine (Pvd), which chelates iron and shuttles it into the cells via the specific outer membrane transporter FpvA. We studied the role of iron and other metals in the binding and transport of Pvd by FpvA and conclude that there is no significant affinity between FpvA and metal-free Pvd. We found that the fluorescent in vivo complex of iron-free FpvA-Pvd is in fact a complex with aluminum (FpvA-Pvd-Al) formed from trace aluminum in the growth medium. When Pseudomonas aeruginosa was cultured in a medium that had been treated with a metal affinity resin, the in vivo formation of the FpvA-Pvd complex and the recycling of Pvd on FpvA were nearly abolished. The accumulation of Pvd in the periplasm of Pseudomonas aeruginosa was also reduced in the treated growth medium, while the addition of 1 microM AlCl(3) to the treated medium restored the effects of trace metals observed in standard growth medium. Using fluorescent resonance energy transfer and surface plasmon resonance techniques, the in vitro interactions between Pvd and detergent-solubilized FpvA were also shown to be metal dependent. We demonstrated that FpvA binds Pvd-Fe but not Pvd and that Pvd did not compete with Pvd-Fe for FpvA binding. In light of our finding that the Pvd-Al complex is transported across the outer membrane of Pseudomonas aeruginosa, a model for siderophore recognition based on a metal-induced conformation followed by redox selectivity for iron is discussed.     

Effectiveness of out-of-home day care for disadvantaged families: randomised controlled trial

Objective To assess the effects of providing daycare facilities for young children on the health and welfare of disadvantaged families.Design Randomised controlled trial. Eligible children from the application list to a daycare facility were randomly allocated to receive a daycare place or not.Setting Early Years daycare centre in Borough of Hackney, London.Participants 120 mothers and 143 eligible children (aged between 6 months and 3.5 years).Intervention A place at the centre, which provided high quality day care. Control families used other child care that they secured for themselves.Main outcome measures Maternal paid employment, household income, child health and development.Results At 18 months'' follow up, 67% of intervention group mothers and 60% of control group mothers were in paid employment (adjusted risk ratio 1.23 (95% confidence interval 0.99 to 1.52)), but were no more likely to have a weekly household income of above £200 (risk ratio 0.88 (0.70 to 1.09)). Intervention group children had more otitis media with effusion (risk ratio 1.74 (1.02 to 2.96)) and used more health services (1.58 (1.05 to 2.38)), but both estimates were imprecise.Conclusion The provision of child day care may have increased maternal employment, but it did not seem to increase household income. The results suggest that providing day care may be insufficient as a strategy to reduce poverty. The study shows how random allocation can be used to ration and evaluate interventions where demand exceeds supply.     

In situ detection of antibiotic-resistance elements in single Bacillus cereus spores

Rapid detection of Bacillus spores is a challenging task in food and defense industries. In situ labeling of spores would be advantageous for detection by automated systems based on single-cell analysis. Determination of antibiotic-resistance genes in bacterial spores using in situ labeling has never been developed. Most of the in situ detection schemes employ techniques such as fluorescence in situ hybridization (FISH) that target the naturally amplified ribosomal RNA (rRNA). However, the majority of antibiotic-resistance genes has a plasmidic or chromosomal origin and is present in low copy numbers in the cell. The main challenge in the development of low-target in situ detection in spores is the permeabilization procedure and the signal amplification required for detection. This study presents permeabilization and in situ signal amplification protocols, using Bacillus cereus spores as a model, in order to detect antibiotic-resistance genes. The permeabilization protocol was designed based on the different layers of the Bacillus spore. Catalyzed reporter deposition (CARD)–FISH and in situ polymerase chain reaction (PCR) were used as signal amplification techniques. B. cereus was transformed with the high copy number pC194 and low copy number pMTL500Eres plasmids in order to induce resistance to chloramphenicol and erythromycin, respectively. In addition, a rifampicin-resistant B. cereus strain, conferred by a single-nucleotide polymorphism (SNP) in the chromosome, was used. Using CARD–FISH, only the high copy number plasmid pC194 was detected. On the other hand, in situ PCR gave positive results in all tested instances. This study demonstrated that it was feasible to detect antibiotic-resistance genes in Bacillus spores using in situ techniques. In addition, in situ PCR has been shown to be more sensitive and more applicable than CARD–FISH in detecting low copy targets.     

Spiropiperidine CCR5 antagonists

A novel series of CCR5 antagonists has been identified, utilizing leads from high-throughput screening which were further modified based on insights from competitor molecules. Lead optimization was pursued by balancing opposing trends of metabolic stability and potency. Selective and potent analogs with good pharmacokinetic properties were successfully developed.     

Helix α4 of the Bacillus thuringiensis Cry1Aa Toxin Plays a Critical Role in the Postbinding Steps of Pore Formation

Helix α4 of Bacillus thuringiensis Cry toxins is thought to play a critical role in the toxins'' mode of action. Accordingly, single-site substitutions of many Cry1Aa helix α4 amino acid residues have previously been shown to cause substantial reductions in the protein''s pore-forming activity. Changes in protein structure and formation of intermolecular disulfide bonds were investigated as possible factors responsible for the inactivity of these mutants. Incubation of each mutant with trypsin and chymotrypsin for 12 h did not reveal overt structural differences with Cry1Aa, although circular dichroism was slightly decreased in the 190- to 210-nm region for the I132C, S139C, and V150C mutants. The addition of dithiothreitol stimulated pore formation by the E128C, I132C, S139C, T142C, I145C, P146C, and V150C mutants. However, in the presence of these mutants, the membrane permeability never reached that measured for Cry1Aa, indicating that the formation of disulfide bridges could only partially explain their loss of activity. The ability of a number of inactive mutants to compete with wild-type Cry1Aa for pore formation in brush border membrane vesicles isolated from Manduca sexta was also investigated with an osmotic swelling assay. With the exception of the L147C mutant, all mutants tested could inhibit the formation of pores by Cry1Aa, indicating that they retained receptor binding ability. These results strongly suggest that helix α4 is involved mainly in the postbinding steps of pore formation.During the last few decades, the insecticidal toxins produced by Bacillus thuringiensis have been used increasingly in the forms of formulated sprays and transgenic plants for the highly focused biological control of insect pests (29). At the same time, the mechanism by which these proteins form pores in the apical membrane of midgut epithelial cells of targeted insects has been studied extensively (7, 29). In the case of the three-domain Cry toxins, specificity is mostly attributable to their capacity to bind to certain proteins located on the surface of the intestinal membrane through specific segments of domains II and III, composed mainly of β sheets (16, 27). On the other hand, membrane insertion and pore formation are thought to occur through elements of domain I, composed of a bundle of six amphipathic α-helices surrounding the highly hydrophobic helix α5 (17, 20).Several lines of evidence indicate that helices α4 and α5 play a particularly important role in these processes (3). Spectroscopic studies with synthetic peptides corresponding to domain I helices revealed that α4 and α5 have the greatest propensity for insertion into artificial membranes, although insertion and pore formation were most efficient when α4 and α5 were connected by a segment corresponding to the α4-α5 loop of the toxin (13, 14). A particularly large number of single-site mutations with altered amino acids from these helices, which lead to a strong reduction in the toxicity and pore-forming ability of the toxin, have been characterized (2, 9, 10, 15, 18, 23, 25, 30, 31, 33). Finally, a site-directed chemical modification study has provided strong evidence that α4 lines the lumens of the pores formed by the toxin (23).Recent studies have established that toxin activity is especially sensitive to modifications not only in the charged residues of α4 (31) but in most of its hydrophilic residues (15). Furthermore, the loss of activity of most of these mutants did not result from an altered selectivity or size of the pores but from a reduced pore-forming capacity of the toxin (15, 31). In order to better understand the role of α4 in the mechanism of pore formation, the present study was carried out with a series of previously characterized Cry1Aa mutants in which most of the residues from this helix were replaced by cysteines (15). By subjecting these mutants to circular dichroism (CD), protease sensitivity, pore formation inhibition, and electrophoretic mobility analyses, our data suggest that the mutations in α4 which alter the pore-forming ability of Cry1Aa do so mainly by preventing the proper oligomerization or membrane insertion of the toxin.