Electromagnetic absorption in an inhomogeneous model of man for realistic exposure conditions

The advances made in quantifying electromagnetic absorption and its distribution for various exposure profiles are described. The conditions that have been studied extensively are: free-space irradiation and its variations, such as the presence of ground and reflecting surfaces and other humans in close proximity. Using an inhomogeneous block model of man, work has recently been extended to leakage-type near-fields such as those from RF heat sealers and other electronic equipment. Projections are made for the extension of this work to evaluate coupled near-fields, design of multielement near-field applicators to obtain physician-prescribed uniform or nonuniform rates of regional heating, and for the inverse scattering problem necessary for electromagnetic biomedical imaging. Accurate information about the dielectric properties of various tissues becomes increasingly important for proper inhomogeneous modeling of man.     

Cyclic GMP Reduces Ventricular Myocyte Stunning after Simulated Ischemia–Reperfusion

We tested the hypothesis that the second messenger activated by nitric oxide, cyclic GMP, would reduce the effects of myocyte stunning following simulated ischemia-reperfusion and that this was related to cyclic GMP protein kinase. Ventricular cardiac myocytes were isolated from New Zealand White rabbits (n = 8). Cell shortening was measured by a video edge detector and protein phosphorylation was determined autoradiographically after SDS gel electrophoresis. Cell shortening data were acquired at: (i) baseline followed by 8-Bromo-cGMP 10(-6) M (8-Br-cGMP) and then KT 5823 10(-6) M (cyclic GMP protein kinase inhibitor) and (ii) simulated ischemia (20 min of 95% N(2)-5% CO(2) at 37 degrees C) followed by simulated reperfusion (reoxygenation) with addition of 8-Br-cGMP 10(-6) M followed by KT 5823 10(-6) M, (iii) addition of 8-Br-cGMP prior to ischemia followed by the addition of KT 5823 10(-6) M after 30 min of reoxygenation. In the control group, 8-Br-cGMP 10(-6) M decreased percentage shortening (%short) (5.0 +/- 0.6 vs 3.8 +/- 0. 4) and the maximum velocity (V(max), microm/s) (48.6 +/- 6.9 vs 40.2 +/- 6.4). KT 5823 10(-6) M added after 8-Br-cGMP partially restored %short (4.6 +/- 0.5) and V(max) (46.6 +/- 8.0). After stunning, baseline myocytes had decreased %short (3.4 +/- 0.2) and V(max) (36. 0 +/- 4.2). After the addition of 8-Br-cGMP, the %short (2.7 +/- 0. 2) and V(max) (27.6 +/- 2.5) decreased further. The addition of KT 5823 did not change either the %short or the V(max). The myocytes with 8-Br-cGMP during ischemia had increased %short (4.2 +/- 0.2) and V(max) (37.2 +/- 3.4) when compared to the stunned group. The addition of KT 5823 did not significantly alter %short (3.3 +/- 0.4) or V(max) (29.2 +/- 5.0) in the myocytes pretreated with 8-Br-cGMP. Protein phosphorylation was increased by 8-Br-cGMP in control and stunned myocytes. KT 5823 blocked this effect in control but not stunned myocytes, suggesting some change in the cyclic GMP protein kinase. Ischemia-reperfusion produced myocyte stunning that was reduced when 8-Br-cGMP was added prior to but not after ischemia.     

Role of cell attachment in leaching of chalcopyrite mineral by Thiobacillus ferrooxidans

Summary Experiments on the leaching of copper from chalcopyrite mineral by the bacterium Thiobacillus ferrooxidans show that, in the presence of adequate amounts of sulphide, iron-grown bacteria preferentially oxidise sulphur in the ore (through direct attachment) rather than ferrous sulphate in solution. At 20% pulp density, the leaching initially takes place by a predominantly direct mechanism. The cell density in the liquid phase increases, but the Fe²⁺ is not oxidised. However, in the later stages when less solid substrate is available and the cell density becomes very high, the bacteria start oxidising Fe²⁺ in the liquid phase, thus contributing to the indirect mechanism of leaching. Contrary to expectations, the rate of leaching increased with increasing particle size in spite of the decreasing specific surface area. This has been found to be due to increasing attachment efficiency with increase in particle size. Offprint requests to: R. Kumar