Cell-substrate adhesion and metastatic potential of cultured mesothelioma cells induced by asbestos

Cell-substrate adhesion was quantified for two cultured mesothelioma cell lines (epitheliomatus and sarcomatous) on glass, fibronectin and laminin substrates. Interference reflection microscopy (IRM) was used to image the adhesion patterns of cells and a grey level analysis was employed to quantify adhesion. Sarcomatous cells demonstrated marked adhesion to glass and fibronectin-coated substrates but not to laminin-coated substrate, with the greatest adhesion occurring on the fibronectin-coated surface. This adhesion was accompanied by cytoplasmic spreading. By contrast, epitheliomatous cells showed little tendency to adhere to any of the substrates and only showed significant spreading when in contact with the laminin substrate (P < 0.01). A bioassay was used to determine the metastatic potential of each of the cell lines. Via the intravenous route, the sarcomatous cells killed the host rats in 24.7 ± 1.5 (S.D.) days compared to 27.3 ± 0.9 (S.D.) days for the epitheliomatous cells (P < 0.01). After subcutaneous inoculation of tumour cells, the sarcomatous cells killed the host rats in 54.7 ± 0.7 (S.D.) days compared to 48.5 ± 0.5 (S.D.) days for the epitheliomatous cells (P < 0.01). We conclude that the results of the metastasis bioassays were consistent with the predicted behavior of these cell lines based on their ability to adhere to substrates in the in vitro adhesion assays.     

Effect of bicarbonate and root zone temperature on uptake of Zn,Fe, Mn and Cu by different rice cultivars (Oryza sativa L.) grown in calcareous soil

Pot experiments were conducted with a calcareous soil (Inceptisol) to elucidate the effects of bicarbonate (0 and 20 mM) and root zone temperature (15° and 25°C) on the uptake of Zn, Fe, Mn and Cu by "Zn-efficient" and "Zn-inefficient" rice cultivars. Bicarbonate decreased concentrations and total uptake of Zn in shoots of "Zn-inefficient" cultivars, especially of IR 26 at 25°C, but not in Zn-efficient cultivars. Bicarbonate decreased concentrations and uptake of Fe in shoots of Zn inefficient cultivars, particularly in IR 26. Concentrations and total uptake of Mn were lower in bicarbonate treatment in the Zn-inefficient cultivars at 15°C, and in all cultivars at 25°C. However, concentration and uptake of Cu were not affected by bicarbonate in all cultivars. Compared to the 25°C root zone temperature, the concentrations and total uptake of both Zn and Cu in shoots at 15°C were lower in Zn-inefficient than in the Zn-efficient cultivars. The results indicate that Zn-efficiency in rice is causally related to high tolerance of plant to elavated bicarbonate concentrations in soil solution.     

The effect of the cassava green mite Mononychellus tanajoa on the growth and yield of cassava Manihot esculenta in a seasonally dry area in Kenya

The effect of the cassava green mite Mononychellus tanajoa on the growth and yield of cassava Manihot esculenta was studied over a 10-month period in two field trials near Lake Victoria in Kenya. One plot was maintained free of mites by means of acaricide, while the other was artificially infested.The highest population density of M. tanajoa occurred during the dry season. A maximum leaf area index (LAI) of about 2 was reached at the onset of the dry season. The total leaf area of mite infested plants was reduced compared with uninfested plants during the dry spell. During the following rainy season infested plants recovered and attained the same leaf area as uninfested plants. A multiple regression model predicting the leaf area showed that 58% of the seasonal variation could be explained by plant age, soil water, and leaf injury.The net growth rate of infested plants was lower than that of uninfested plants. Maximum values of 21 (infested plants) and 49 (uninfested plants) g m^-2 week^-1 were attained at the onset of the second rainy season. No difference was found between uninfested and infested plants with respect to net assimilation rates per unit leaf area during the dry season. The net assimilation rates reached a maximum almost at the same time as the growth rates, but the infested plants peaked slightly earlier and at a lower level than the uninfested plants. M. tanajoa did not affect the relative allocation of dry matter into stems and storage roots, but the absolute allocation of dry matter declined with increasing mite injury. Thus, after 10 months the dry matter of infested plants was reduced by 29% and 21% for storage roots and stems, respectively, compared with the uninfested plants.     

Effect of temperature and glucose supply on the production of polyunsaturated fatty acids by the fungus Mortierella alpina CBS 343.66 in fermentor cultures

The fungus Mortierella alpina CBS 343.66 was grown in a fermentor at different pH, temperatures and supplies of carbon source (glucose) in order to optimize the culture conditions for rapid biomass and lipid production with a high proportion of polyunsaturated fatty acids, especially arachidonic acid (AA). Good growth and lipid production with 31% AA was obtained at pH 6.5 and 25°C. A temperature decrease to 18°C gave a significantly higher degree of polyunsaturated fatty acids. Eicosapentaenoic acid was not detected at 25°C, but was formed at 18°C at about 10%. The AA concentration but was similar for 18°C about 10%. The AA concentration was similar for 18°C and 25°C (around 30%): 18°C allowed relatively good growth and had a beneficial effect on the fungus morphology, i.e. pellets were formed. Best lipid production and a AA content of up to 33% was achieved at an excess of glucose (carbon source) and a deficit of ammonium chloride (nitrogen source). The percentage of AA of the total fatty acid composition was constant as ong as glucose was present. At glucose exhaustion, the proportion of AA increased to 57%. The increase in AA corresponded to a decrease in palmitic acid, stearic acid and oleic acid. Correspondence to: G. Molin     

Insulin-like growth factor I enhances the formation of type I collagen in hydrocortisone-treated human osteoblasts

We have studied the effect of insulin-like growth factor I (IGF-I) on the formation of osteocalcin and type I collagen in isolated human osteoblasts. IGF-I at and above 0.1 nM stimulated the formation of type I collagen as measured by the type I procollagen carboxyterminal peptide (PICP), in human osteoblasts, incubated for 72 hrs in serumfree conditions. The secretion of osteocalcin was not affected by IGF-I while 1,25(OH)₂ vitamin D₃ significantly enhanced the formation of osteocalcin. When human osteoblast-like cells were incubated with hydrocortisone (1 M), a significant decrease in the release of both PICP and osteocalcin was seen. Addition of IGF-I to human osteoblasts also treated with hydrocortisone normalized the PICP-formation but did not affect the suppressed osteocalcin-formation. These data indicate that IGF-I reverses selective effects of hydrocortisone on bone.     

Fed-batch cultivation of recombinant escherichia coli JM103 and production of the fusion protein SPA::EcoRI in a 60-L working volume airlift tower loop reactor

SPA::EcoRI fusion protein was produced by Escherichia coli JM103 carrying the multicopy expression plasmid pMTC48, the multicopy repressor plasmid pRK248, and the multicopy protection plasmid pEcoR4 in a 60-L working volume airlift tower loop reactor on M9 minimal medium with glucose. Cell mass concentration, total cell count, number of colony-forming units, specific growth rate, yield coefficient, and metabolite (acetate, pyruvate, succinate, lactate, ethanol) concentrations were monitored during the growth phase and gene expression. Gene expression was induced by temperature shift or chemically by isopropyl-thiogalactosidase in the airlift tower loop reactor (ALTR) at constant cultivation time and in a small stirred tank reactor at different cultivation times. During induction, the cultivation medium was supplemented with concentrated Luria-Bertani (LB) medium. The intracellular enzyme activity was evaluated as a function of the time after the start of the induction. It was found that the reduction of the glucose concentration and increase of the dissolved oxygen concentration reduced the acetate produced and increased the intracellular enzyme activity. (c) 1993 John Wiley & Sons, Inc.     

PocketOptimizer 2.0: A modular framework for computer-aided ligand-binding design

The ability to design customized proteins to perform specific tasks is of great interest. We are particularly interested in the design of sensitive and specific small molecule ligand-binding proteins for biotechnological or biomedical applications. Computational methods can narrow down the immense combinatorial space to find the best solution and thus provide starting points for experimental procedures. However, success rates strongly depend on accurate modeling and energetic evaluation. Not only intra- but also intermolecular interactions have to be considered. To address this problem, we developed PocketOptimizer, a modular computational protein design pipeline, that predicts mutations in the binding pockets of proteins to increase affinity for a specific ligand. Its modularity enables users to compare different combinations of force fields, rotamer libraries, and scoring functions. Here, we present a much-improved version––PocketOptimizer 2.0. We implemented a cleaner user interface, an extended architecture with more supported tools, such as force fields and scoring functions, a backbone-dependent rotamer library, as well as different improvements in the underlying algorithms. Version 2.0 was tested against a benchmark of design cases and assessed in comparison to the first version. Our results show how newly implemented features such as the new rotamer library can lead to improved prediction accuracy. Therefore, we believe that PocketOptimizer 2.0, with its many new and improved functionalities, provides a robust and versatile environment for the design of small molecule-binding pockets in proteins. It is widely applicable and extendible due to its modular framework. PocketOptimizer 2.0 can be downloaded at https://github.com/Hoecker-Lab/pocketoptimizer .