A simple process for the isolation of epithelial cells from bacteria-contaminated samples using anchoring molecules

A simple and efficient tool to isolate epithelial cells from bacteria-contaminated samples has been developed using two different microparticles functionalized with chemical molecules. The epithelial cells could be captured simply by biocompatible anchors for membranes (BAM), consisting of poly(ethylene glycol) functionalized with oleyl-chain-conjugated NHS (N-hydroxysuccinimide) on glass microparticles, whereas bacteria were adsorbed on 3-aminopropyltrimethoxysilane (ATPS)-functionalized magnetic microparticles. In the case of samples highly contaminated with bacteria, epithelial cells were not isolated successfully by both of the single BAM- and antibody-functionalized microparticles. Therefore, serial isolation steps of these two different chemical functionalized microparticles were introduced. The concentration of bacteria was decreased dramatically by using APTS-functionalized magnetic particles prior to the isolation of epithelial cells by BAM microparticles. With these serial processes, successful isolation of epithelial cells was achieved from bacteria-contaminated epithelial samples. The applicability of this method was verified with bacteria-contaminated intestinal samples biopsied from a BALB/C mouse for primary cell cultivation.     

Antifungal effect of CopA3 monomer peptide via membrane-active mechanism and stability to proteolysis of enantiomeric d-CopA3

In our previous study, coprisin, a 43-mer defensin-like peptide, was derived from the dung beetle, Copris tripartitus, and a 9-mer CopA3 (monomer), truncated coprisin analog peptide, was designed. However, the antifungal effects of CopA3 are not known yet. In this study, the antifungal activity and mechanism of CopA3 were investigated and to develop a more effective antimicrobial peptide under physiological conditions, the enantiomeric d-CopA3 was designed. l- and d-CopA3 had a similar antifungal activity without chiral selectivity, and their activity was more potent than that of melittin used as a positive control. Furthermore, l- and d-CopA3 did not even show any hemolysis against human erythrocytes. Membrane studies using propidium iodide and bis-(1,3-dibutylbarbituric acid) trimethine oxonol [DiBAC₄(3)], suggested that the antifungal effect of l- and d-CopA3 was due to the membrane-active mechanism, by contrast with coprisin possessing apoptotic mechanism without membrane permeabilization. Finally, the proteolytic resistance and antifungal activity of l- and d-CopA3 against trypsin was analyzed by HPLC and colony count assay. The results showed that only d-CopA3 maintained a potent antifungal activity despite the proteolytic condition. Therefore, this study suggests that d-CopA3 has potential as a novel antimicrobial agent.     

Comparison of Fabrication Methods Based on Nanoimprinting Lithography for Plasmonic Color Filter Fabrication

The angle-variable tunable optical filter was strictly fabricated by two strategies of nanoimprint-coupled metal nanopatterning with improved cost-effectiveness and accessibility. The tunable optical properties and the performances of two strategies were experimentally examined and turned out to be well matched to numerical results. Tunable properties are obtained by three factors: size of fabricated Ag nanodisks, incident illumination angle, and fabrication strategies. The resonant extinction peak shifts were identified to show a large increase along with the increase in fabricated Ag disk size and increase in the incidence angle of illumination. When comparing a fabrication strategy, it was confirmed that the sample fabricated by the strip-off method has better stability on color changes with a consistent dependency on the incident angle. The presented strategies of fabrication are technically viable for obtaining well-defined plasmonic nanostructures so that it has the feasibility to apply for fascinating optical applications including display or tunable optical filters.

     

Ablation of Gadd45β ameliorates the inflammation and renal fibrosis caused by unilateral ureteral obstruction

The growth arrest and DNA damage‐inducible beta (Gadd45β) protein have been associated with various cellular functions, but its role in progressive renal disease is currently unknown. Here, we examined the effect of Gadd45β deletion on cell proliferation and apoptosis, inflammation, and renal fibrosis in an early chronic kidney disease (CKD) mouse model following unilateral ureteral obstruction (UUO). Wild‐type (WT) and Gadd45β‐knockout (KO) mice underwent either a sham operation or UUO and the kidneys were sampled eight days later. A histological assay revealed that ablation of Gadd45β ameliorated UUO‐induced renal injury. Cell proliferation was higher in Gadd45β KO mouse kidneys, but apoptosis was similar in both genotypes after UUO. Expression of pro‐inflammatory cytokines after UUO was down‐regulated in the kidneys from Gadd45β KO mice, whereas UUO‐mediated immune cell infiltration remained unchanged. The expression of pro‐inflammatory cytokines in response to LPS stimulation decreased in bone marrow‐derived macrophages from Gadd45β KO mice compared with that in WT mice. Importantly, UUO‐induced renal fibrosis was ameliorated in Gadd45β KO mice unlike in WT mice. Gadd45β was involved in TGF‐β signalling pathway regulation in kidney fibroblasts. Our findings demonstrate that Gadd45β plays a crucial role in renal injury and may be a therapeutic target for the treatment of CKD.     

An Antiaging Electrolyte Additive for High‐Energy‐Density Lithium‐Ion Batteries

High‐capacity Li‐rich layered oxide cathodes along with Si‐incorporated graphite anodes have high reversible capacity, outperforming the electrode materials used in existing commercial products. Hence, they are potential candidates for the development of high‐energy‐density lithium‐ion batteries (LIBs). However, structural degradation induced by loss of interfacial stability is a roadblock to their practical use. Here, the use of malonic acid‐decorated fullerene (MA‐C₆₀) with superoxide dismutase activity and water scavenging capability as an electrolyte additive to overcome the structural instability of high‐capacity electrodes that hampers the battery quality is reported. Deactivation of PF₅ by water scavenging leads to the long‐term stability of the interfacial structures of electrodes. Moreover, an MA‐C₆₀‐added electrolyte deactivates the reactive oxygen species and constructs an electrochemically robust cathode‐electrolyte interface for Li‐rich cathodes. This work paves the way for new possibilities in the design of electrolyte additives by eliminating undesirable reactive substances and tuning the interfacial structures of high‐capacity electrodes in LIBs.     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

Activation of Ni Particles into Single Ni–N Atoms for Efficient Electrochemical Reduction of CO2

Electrochemical reduction of carbon dioxide (CO₂) to fuels and value‐added industrial chemicals is a promising strategy for keeping a healthy balance between energy supply and net carbon emissions. Here, the facile transformation of residual Ni particle catalysts in carbon nanotubes into thermally stable single Ni atoms with a possible NiN₃ moiety is reported, surrounded with a porous N‐doped carbon sheath through a one‐step nanoconfined pyrolysis strategy. These structural changes are confirmed by X‐ray absorption fine structure analysis and density functional theory (DFT) calculations. The dispersed Ni single atoms facilitate highly efficient electrocatalytic CO₂ reduction at low overpotentials to yield CO, providing a CO faradaic efficiency exceeding 90%, turnover frequency approaching 12 000 h^?1, and metal mass activity reaching about 10 600 mA mg^?1, outperforming current state‐of‐the‐art single atom catalysts for CO₂ reduction to CO. DFT calculations suggest that the Ni@N₃ (pyrrolic) site favors *COOH formation with lower free energy than Ni@N₄, in addition to exothermic CO desorption, hence enhancing electrocatalytic CO₂ conversion. This finding provides a simple, scalable, and promising route for the preparation of low‐cost, abundant, and highly active single atom catalysts, benefiting future practical CO₂ electrolysis.     

Industrial attributes of β-glucanase produced by Bacillus sp. CSB55 and its potential application as bio-industrial catalyst

Bioprocess and Biosystems Engineering - The β-glucanase produced from Bacillus sp. CSB55 not only depicts the potent industrial characteristics but also relates as bio-industrial catalyst...     

The structure and antimicrobial potential of wasp and hornet (Vespidae) mastoparans: A review

Wasp venom is a complex mixture of biologically active components, including high molecular weight proteins, small peptides, bioactive amines, and amino acids. Peptides comprise up to 70% of dried venom. In social wasp venoms, three of the major peptide types are mastoparans, which cause mast cell degranulation, chemotactic peptides, which promote chemotaxis of polymorphonucleated leukocytes, and kinin‐related peptides, which are known to produce pain and increase vascular permeability. Among these, the bioactive tridecapeptide mastoparan is the most common and may even have antimicrobial activity. Herein we summarize the results of studies on vespid mastoparans, focusing on hornets (Vespa spp.) identified following a systematic literature search for mastoparans of hornets in the genus Vespa, the most active mastoparan research taxon. The common features of hornet mastoparans are C‐terminal amidation, amphipathic helical structure, and multiple functions such as mast cell degranulation and hemolysis, as well as membrane permeabilization. Most interestingly, all tested hornet mastoparans have strong antimicrobial activities, suggesting that they can provide useful insights into and opportunities for development of novel antibacterial peptides.     

Insect diversity in Gonggeom‐ji,the first protected paddy field wetland in Korea

Gonggeom‐ji pond is the first protected paddy field wetland area, designated by the Ministry of Environment of Korea in 2011, because of its high biodiversity and historic value. It contains reservoirs, paddy fields, and a forest site that provides diverse niches for insects. Quantitative methods were used in this study to estimate the insect diversity of this region. A transect of 50 m was designated in each site (reservoirs, paddy fields, and a forest site). Data were collected using sweeping and pitfall traps along each transect in May, August, and November 2017, representative of the seasons—spring, summer, and autumn, respectively. As a result, a total of 1079 individual insects representing 170 species from 60 families within nine orders were collected. Diversity, richness, and evenness indices were the highest in the forest site in May (4.77, 8.6, and 0.91, respectively). The dominance index was the highest in the forest site in November (0.64). Similarity index was the highest in the reservoir in May and August (0.519). These results would help compare different sites and their vegetation to assess relationships between insects and habitats.