The conjugal transfer system of Agrobacterium tumefaciens octopine-type Ti plasmids is closely related to the transfer system of an IncP plasmid and distantly related to Ti plasmid vir genes.

We have determined the DNA sequences of two unlinked regions of octopine-type Ti plasmids that contain genes required for conjugal transfer. Both regions previously were shown to contain sequences that hybridize with tra genes of the nopaline-type Ti plasmid pTiC58. One gene cluster (designated tra) contains a functional oriT site and is probably required for conjugal DNA processing, while the other gene cluster (designated trb) probably directs the synthesis of a conjugal pilus and mating pore. Most predicted Tra and Trb proteins show relatively strong sequence similarity (30 to 50% identity) to the Tra and Trb proteins of the broad-host-range IncP plasmid RP4 and show significantly weaker sequence similarity to Vir proteins found elsewhere on the Ti plasmid. An exception is found in the Ti plasmid TraA protein, which is predicted to be a bifunctional nickase-helicase that has no counterpart in IncP plasmids or among Vir proteins but has homologs in at least six other self-transmissible and mobilizable plasmids. We conclude that this Ti plasmid tra system evolved by acquiring genes from two or three different sources. A similar analysis of the Ti plasmid vir region indicates that it also evolved by appropriating genes from at least two conjugal transfer systems. The widely studied plasmid pTiA6NC previously was found to be nonconjugal and to have a 12.65-kb deletion of DNA relative to other octopine-type Ti plasmids. We show that this deletion removes the promoter-distal gene of the trb region and probably accounts for the inability of this plasmid to conjugate.     

Generation of whole genome sequences of new Cryptosporidium hominis and Cryptosporidium parvum isolates directly from stool samples

Background

Whole genome sequencing (WGS) of Cryptosporidium spp. has previously relied on propagation of the parasite in animals to generate enough oocysts from which to extract DNA of sufficient quantity and purity for analysis. We have developed and validated a method for preparation of genomic Cryptosporidium DNA suitable for WGS directly from human stool samples and used it to generate 10 high-quality whole Cryptosporidium genome assemblies. Our method uses a combination of salt flotation, immunomagnetic separation (IMS), and surface sterilisation of oocysts prior to DNA extraction, with subsequent use of the transposome-based Nextera XT kit to generate libraries for sequencing on Illumina platforms. IMS was found to be superior to caesium chloride density centrifugation for purification of oocysts from small volume stool samples and for reducing levels of contaminant DNA.

Results

The IMS-based method was used initially to sequence whole genomes of Cryptosporidium hominis gp60 subtype IbA10G2 and Cryptosporidium parvum gp60 subtype IIaA19G1R2 from small amounts of stool left over from diagnostic testing of clinical cases of cryptosporidiosis. The C. parvum isolate was sequenced to a mean depth of 51.8X with reads covering 100 % of the bases of the C. parvum Iowa II reference genome (Bioproject PRJNA 15586), while the C. hominis isolate was sequenced to a mean depth of 34.7X with reads covering 98 % of the bases of the C. hominis TU502 v1 reference genome (Bioproject PRJNA 15585).The method was then applied to a further 17 stools, successfully generating another eight new whole genome sequences, of which two were C. hominis (gp60 subtypes IbA10G2 and IaA14R3) and six C. parvum (gp60 subtypes IIaA15G2R1 from three samples, and one each of IIaA17G1R1, IIaA18G2R1, and IIdA22G1), demonstrating the utility of this method to sequence Cryptosporidium genomes directly from clinical samples. This development is especially important as it reduces the requirement to propagate Cryptosporidium oocysts in animal models prior to genome sequencing.

Conclusion

This represents the first report of high-quality whole genome sequencing of Cryptosporidium isolates prepared directly from human stool samples.     

Improving the large scale purification of the HIV microbicide,griffithsin

Background

Griffithsin is a broad spectrum antiviral lectin that inhibits viral entry and maturation processes through binding clusters of oligomannose glycans on viral envelope glycoproteins. An efficient, scaleable manufacturing process for griffithsin active pharmaceutical ingredient (API) is essential for particularly cost-sensitive products such as griffithsin -based topical microbicides for HIV-1 prevention in resource poor settings. Our previously published purification method used ceramic filtration followed by two chromatography steps, resulting in a protein recovery of 30%. Our objective was to develop a scalable purification method for griffithsin expressed in Nicotiana benthamiana plants that would increase yield, reduce production costs, and simplify manufacturing techniques. Considering the future need to transfer griffithsin manufacturing technology to resource poor areas, we chose to focus modifying the purification process, paying particular attention to introducing simple, low-cost, and scalable procedures such as use of temperature, pH, ion concentration, and filtration to enhance product recovery.

Results

We achieved >99% pure griffithsin API by generating the initial green juice extract in pH 4 buffer, heating the extract to 55°C, incubating overnight with a bentonite MgCl₂ mixture, and final purification with Capto™ multimodal chromatography. Griffithsin extracted with this protocol maintains activity comparable to griffithsin purified by the previously published method and we are able to recover a substantially higher yield: 88 ± 5% of griffithsin from the initial extract. The method was scaled to produce gram quantities of griffithsin with high yields, low endotoxin levels, and low purification costs maintained.

Conclusions

The methodology developed to purify griffithsin introduces and develops multiple tools for purification of recombinant proteins from plants at an industrial scale. These tools allow for robust cost-effective production and purification of griffithsin. The methodology can be readily scaled to the bench top or industry and process components can be used for purification of additional proteins based on biophysical characteristics.     

THEORETICAL DESIGN CONSIDERATIONS AND PHYSIOLOGIC PERFORMANCE CRITERIA FOR AN IMPROVED INTRACORPOREAL (ABDOMINAL) ELECTRICALLY ACTUATED LONG-TERM LEFT VENTRICULAR ASSIST DEVICE ("E-TYPE" ALVAD) OR PARTIAL ARTIFICIAL HEART

Our laboratories are engaged in the design of a clinically-oriented electrically actuated long-term intracorporeal (abdominal) left ventricular assist device ("E-type" ALVAD) or partial artificial heart. This infradiaphragmatic blood pump is designed to be powered by implantable electrical to mechanical energy converter systems. THE FOLLOWING ANALYSES WERE UNDERTAKEN TO: [List: see text] The proposed "E-type" ALVAD should be capable of pumping 4-7 liters per minute at heart rates of 75-100 beats per minute during rest, and 10 liters per minute at rates of 120 beats per minute during moderate exercise. These performance levels should be exceeded with a maximum device stroke volume of 85-90 ml and a mean pump inflow (filling) impedance of 相似文献   

PREFABRICATION DESIGN CONSIDERATIONS FOR A LONG-TERM ELECTRICALLY-ACTUATED ABDOMINAL LEFT VENTRICULAR ASSIST DEVICE (E-TYPE ALVAD)

The conceptual design and development of a long-term, low-profile intracorporeal left ventricular assist device is a multifaceted project involving a series of technical, anatomic and physiologic considerations. Patients with severe left ventricular failure refractory to all other forms of therapy could benefit from such a device. Prior to fabrication of such a blood pump, consideration must be given to physiologic parameters of the projected patient population. The pump must be designed to meet physiologic demands and yet conform to the anatomic constraints posed by the patient population. We measured the body surface area (BSA) of a group of patients (n=50) and found the mean BSA for this group to be 1.804 +/- 0.161 m(2). Using 25 ml/m(2) as a stroke volume index indicative of left ventricular failure and a stroke volume index of 45 ml/m(2) as normal, distributions of stroke volumes (normal and in left ventricular failure) were plotted for a potential population and demonstrated that 63% of the projected population can be returned to normal by a pump with a stroke volume >/= 83 ml. Cadaver fitting studies established that 73% of the potential population can accommodate an ALVAD 10.8 cm in diameter. In-vitro tests demonstrated that a pump stroke volume >/= 83 ml could be achieved by the proposed pump with a 15 mmHg filling pressure at rates up to 125 B/min. A pusher-plate stroke of 0.56 inches would be necessary to provide a stroke volume >/= 83 ml. The percent of the patient population that could be served was determined by excluding those in whom the pump would not fit or in whom it would provide less than a normal resting stroke volume. Approximately 73% of the projected patient population would accommodate this pump and be returned to normal circulatory dynamics.     

Bayesian adaptive sequence alignment algorithms

The selection of a scoring matrix and gap penalty parameters continues to be an important problem in sequence alignment. We describe here an algorithm, the 'Bayes block aligner, which bypasses this requirement. Instead of requiring a fixed set of parameter settings, this algorithm returns the Bayesian posterior probability for the number of gaps and for the scoring matrices in any series of interest. Furthermore, instead of returning the single best alignment for the chosen parameter settings, this algorithm returns the posterior distribution of all alignments considering the full range of gapping and scoring matrices selected, weighing each in proportion to its probability based on the data. We compared the Bayes aligner with the popular Smith-Waterman algorithm with parameter settings from the literature which had been optimized for the identification of structural neighbors, and found that the Bayes aligner correctly identified more structural neighbors. In a detailed examination of the alignment of a pair of kinase and a pair of GTPase sequences, we illustrate the algorithm's potential to identify subsequences that are conserved to different degrees. In addition, this example shows that the Bayes aligner returns an alignment-free assessment of the distance between a pair of sequences.      

Evidence from nuclear sequences that invariable sites should be considered when sequence divergence is calculated

It has long been known, from the distribution of multiple amino acid replacements, that not all amino acids of a sequence are replaceable. More recently, the phenomenon was observed at the nucleotide level in mitochondrial DNA even after allowing for different rates of transition and transversion substitutions. We have extended the search to globin gene sequences from various organisms, with the following results: (1) Nearly every data set showed evidence of invariable nucleotide positions. (2) In all data sets, substitution rates of transversions and transitions were never in the ratio of 2/1, and rarely was the ratio even constant. (3) Only rarely (e.g., the third codon position of beta hemoglobins) was it possible to fit the data set solely by making allowance for the number of invariable positions and for the relative rates of transversion and transition substitutions. (4) For one data set (the second codon position of beta hemoglobins) we were able to simulate the observed data by making the allowance in (3) and having the set of covariotides (concomitantly variable nucleotides) be small in number and be turned over in a stochastic manner with a probability that was appreciable. (5) The fit in the latter case suggests, if the assumptions are correct and at all common, that current procedures for estimating the total number of nucleotide substitutions in two genes since their divergence from their common ancestor could be low by as much as an order of magnitude. (6) The fact that only a small fraction of the nucleotide positions differ is no guarantee that one is not seriously underestimating the total amount of divergence (substitutions). (7) Most data sets are so heterogeneous in their number of transition and transversion differences that none of the current models of nucleotide substitution seem to fit them even after (a) segregation of coding from noncoding sequences and (b) splitting of the codon into three subsets by codon position. (8) These frequently occurring problems cannot be seen unless several reasonably divergent orthologous genes are examined together.      

Effects of plant height and row spacing on kenaf forage potential with multiple harvests

Kenaf (Hibiscus cannabinus L.) forage potential can be enhanced through its regrowth capacity and higher production in narrow rows. A field experiment was conducted in Matamoros, Coahuila, Mexico, during 2 growing seasons (2004 and 2005) to study the effects of plant height and row spacing on kenaf forage potential with multiple harvests. This study evaluated the effects of (1) 2 plant heights at cutting (1.0-1.2 m and 1.8-2.0 m) and (2) 4 inter row spacings (0.19, 0.38, 0.57 and 0.76 m) using a 2 x 4 factorial arrangement of treatments in a completely randomized block design with 4 replications. Dry matter (DM) and crude protein (CP) yields, DM partitioning, neutral detergent fiber (NDF) and CP concentrations were determined. Heights at cutting × row spacing interactions were not significant for the monitored variables (p>0.05). Kenaf response to treatments was only relevant for main effects (p≤0.05). Row spacing and plant height affected DM and CP yields (p≤0.05), whereas only plant height affected chemical composition and DM partitioning (p≤0.05). Dry matter (17.0%-26.0%), and CP (12.4%-15.6%) yields were higher (p≤0.05) when plant heights had reached 1.8 to 2.0 m. Row spacing reduction from 0.76 m to 0.38 and 0.19 m increased DM yield (20.4-33.4%) and CP yield (24.2-38.5%) (p≤0.05). Kenaf forage potential increases when planted in narrow rows and harvested 2 or 3 times during the growing season.     

Vegetal cover estimated by digital photographs related to biomass in a grassland site in northern Mexico

A regression model was used to determine the relationship between aerial herbaceous biomass and vegetation coverage estimated by digital images. Four samplings (n=36 each date) of vegetation cover and herbaceous biomass were performed during the growing season in 2011 in a grassland dominated by Bouteloua gracilis in La Cieneguilla, Municipality of Villa Hidalgo, Durango. Average production of dry biomass was 37.36 ± 9.66 g/m², and mean vegetation cover 30.02%. Dry biomass data were tested for normality using the test of Kolmogorov Smirnov, finding a lack of fit. The data were subjected to a logarithmic transformation and the model Ln(y) = 1.637926 + 0.08501X - 0.000586X² with an adjusted R² = 0.89 was found. In order to validate this model, another five samplings were carried out in 2013 at the same site during summer and autumn, using the same sampling size for each date as in 2011. Data collected in 2013 were analyzed with the model Ln (y) = β₀ + β₁X + β₂X². A comparison of regression coefficients was carried out between the 2011 and 2013 models with t (180+144-9-11-2=302, p<0.05) = 1.967. The results indicated that it is possible to use the 2011 regression model to estimate herbaceous aerial biomass from vegetation cover measurements with aerial photographs in La Cieneguilla site during summer and fall.