Micro-Brillouin scattering measurements in mature and newly formed bone tissue surrounding an implant

The evolution of implant stability in bone tissue remains difficult to assess because remodeling phenomena at the bone-implant interface are still poorly understood. The characterization of the biomechanical properties of newly formed bone tissue in the vicinity of implants at the microscopic scale is of importance in order to better understand the osseointegration process. The objective of this study is to investigate the potentiality of micro-Brillouin scattering techniques to differentiate mature and newly formed bone elastic properties following a multimodality approach using histological analysis. Coin-shaped Ti-6Al-4V implants were placed in vivo at a distance of 200?μm from rabbit tibia leveled cortical bone surface, leading to an initially empty cavity of 200?μm×4.4?mm. After 7 weeks of implantation, the bone samples were removed, fixed, dehydrated, embedded in methyl methacrylate, and sliced into 190?μm thick sections. Ultrasonic velocity measurements were performed using a micro-Brillouin scattering device within regions of interest (ROIs) of 10?μm diameter. The ROIs were located in newly formed bone tissue (within the 200?μm gap) and in mature bone tissue (in the cortical layer of the bone sample). The same section was then stained for histological analysis of the mineral content of the bone sample. The mean values of the ultrasonic velocities were equal to 4.97×10(-3)?m/s in newly formed bone tissue and 5.31×10(-3)?m/s in mature bone. Analysis of variance (p=2.42×10(-4)) tests revealed significant differences between the two groups of measurements. The standard deviation of the velocities was significantly higher in newly formed bone than in mature bone. Histological observations allow to confirm the accurate locations of the velocity measurements and showed a lower degree of mineralization in newly formed bone than in the mature cortical bone. The higher ultrasonic velocity measured in newly formed bone tissue compared with mature bone might be explained by the higher mineral content in mature bone, which was confirmed by histology. The heterogeneity of biomechanical properties of newly formed bone at the micrometer scale may explain the higher standard deviation of velocity measurements in newly formed bone compared with mature bone. The results demonstrate the feasibility of micro-Brillouin scattering technique to investigate the elastic properties of newly formed bone tissue.     

Crystal structure of the tandem-type universal stress protein TTHA0350 from Thermus thermophilus HB8

The genome sequence of an extremely thermophilic bacterium, Thermus thermophilus HB8, revealed that TTHA0350 is a tandem-type universal stress protein (Usp) consisting of two Usp domains. Usp proteins, which are characterized by a conserved domain consisting of 130-160 amino acids, are inducibly expressed under a large number of stress conditions. The N-terminal domain of TTHA0350 contains a motif similar to the consensus ATP-binding one (G-2 x-G-9x-G-(S/T)), but the C-terminal one seems to lack the consensus motif. In order to determine its structural properties, we determined the crystal structures of TTHA0350 in the unliganded form and TTHA0350?2ATP at 2.50 and 1.70 ? resolution, respectively. This is the first structure determination of a Usp family protein in both unliganded and ATP-liganded forms. TTHA0350 is folded into a fan-shaped structure which is similar to that of tandem-type Usp protein Rv2623 from Mycobacterium tuberculosis. However, the dimer assembly with C2-symmetry in TTHA0350 is quite different from that with D2-symmetry in Rv2623. The X-ray structure showed that not only the N-terminal but also the C-terminal domain binds one ATP, although the ATP-binding motif could not be detected in the C-terminal domain. The loop interacting with ATP in the C-terminal domain is in a conformation quite different from that in the N-terminal domain.     

Molecular characterization of GroES and GroEL homologues from Clostridium botulinum

We report novel findings of significant amounts of 60- and 10-kDa proteins on SDS-PAGE in a culture supernatant of the Clostridium botulinum type D strain 4947 (D-4947). The N-terminal amino acid sequences of the purified proteins were closely related to those of other bacterial GroEL and GroES proteins, and both positively cross-reacted with Escherichia coli GroEL and GroES antibodies. Native GroEL homologue as an oligomeric complex is a weak ATPase whose activity is inhibited by the presence of GroES homologue. The 2634-bp groESL operon of D-4947 was isolated by PCR and sequenced. The sequence included two complete open reading frames (282 and 1629 bp), which were homologous to the groES and groEL gene family of bacterial proteins. Southern and Northern blot analyses indicate that the groESL operon is encoded on the genomic DNA of D-4947 as a single copy, and not on that of its specific toxin-converting phage.     

Properties of long myosin light chain kinase binding to F-actin in vitro and in vivo

Short and long myosin light chain kinases (MLCKs) are Ca(2+)/calmodulin-dependent enzymes that phosphorylate the regulatory light chain of myosin II in thick filaments but bind with high affinity to actin thin filaments. Three repeats of a motif made up of the sequence DFRXXL at the N terminus of short MLCK are necessary for actin binding (Smith, L., Su, X., Lin, P., Zhi, G., and Stull, J. T. (1999) J. Biol. Chem. 274, 29433-29438). The long MLCK has two additional DFRXXL motifs and six Ig-like modules in an N-terminal extension, which may confer unique binding properties for cellular localization. Two peptides containing either five or three DFRXXL motifs bound to F-actin and smooth muscle myofilaments with maximal binding stoichiometries consistent with each motif binding to an actin monomer in the filaments. Both peptides cross-linked F-actin and bound to stress fibers in cells. Long MLCK with an internal deletion of the five DFRXXL motifs and the unique NH(2)-terminal fragment containing six Ig-like motifs showed weak binding. Cell fractionation and extractions with MgCl(2) indicate that the long MLCK has a greater affinity for actin-containing filaments than short MLCK in vitro and in vivo. Whereas DFRXXL motifs are necessary and sufficient for short MLCK binding to actin-containing filaments, the DFRXXL motifs and the N-terminal extension of long MLCK confer high affinity binding to stress fibers in cells.     

Interleukin‐8 and CXCL10 expression in oral keratinocytes and fibroblasts via Toll‐like receptors

Oral keratinocytes and fibroblasts may be the first line of host defense against oral microorganisms. Here, the contention that oral keratinocytes and fibroblasts recognize microbial components via Toll‐like receptors (TLRs) and participate in development of oral inflammation was examined. It was found that immortalized oral keratinocytes (RT7), fibroblasts (GT1) and primary cells express mRNA of TLRs 1–10. Interleukin‐8 (IL‐8) production by RT7 cells was induced by treatment with TLRs 1–9 with the exception of TLR7 agonist, whereas GT1 cells were induced to produce IL‐8 by all TLR agonists tested except for TLR7 and TLR9. GT1 cells showed increased CXCL10 production following treatment with agonists for TLR1/2, TLR3, TLR4, and TLR5, whereas only those for TLR3 and TLR5 increased CXCL10 production in RT7 cells. Moreover, TLR agonists differentially regulated tumor necrosis factor‐alpha‐induced IL‐8 and CXCL10 production by the tested cell types. These findings suggest that recognition of pathogenic microorganisms in oral keratinocytes and fibroblasts by TLRs may have important roles in orchestrating host immune responses via production of various chemokines.     

Dominant microbial composition and its vertical distribution in saline meromictic Lake Kaiike (Japan) as revealed by quantitative oligonucleotide probe membrane hybridization

Vertical distributions of dominant bacterial populations in saline meromictic Lake Kaiike were investigated throughout the water column and sediment by quantitative oligonucleotide probe membrane hybridization. Three oligonucleotide probes specific for the small-subunit (SSU) rRNA of three groups of Chlorobiaceae were newly designed. In addition, three general domain (Bacteria, Archaea, and Eukarya)-specific probes, two delta-Proteobacteria-specific probes, a Chlorobiaceae-specific probe, and a Chloroflexi-specific probe were used after optimization of their washing conditions. The abundance of the sum of SSU rRNAs hybridizing with probes specific for three groups of Chlorobiaceae relative to total SSU rRNA peaked in the chemocline, accounting for up to 68%. The abundance of the delta-proteobacterial SSU rRNA relative to total SSU rRNA rapidly increased just below the chemocline up to 29% in anoxic water and peaked at the 2- to 3-cm sediment depth at ca. 34%. The abundance of SSU rRNAs hybridizing with the probe specific for the phylum Chloroflexi relative to total SSU rRNA was highest (31 to 54%) in the top of the sediment but then steeply declined with depth and became stable at 11 to 19%, indicating the robust coexistence of sulfate-reducing bacteria and Chloroflexi in the top of the sediment. Any SSU rRNA of Chloroflexi in the water column was under the detection limit. The summation of the signals of group-specific probes used in this study accounted for up to 89% of total SSU rRNA, suggesting that the DGGE-oligonucleotide probe hybridization approach, in contrast to conventional culture-dependent approaches, was very effective in covering dominant populations.