Isolation of a major human placental substrate for the epidermal growth factor (urogastrone) receptor kinase: immunological cross-reactivity with transducin and sequence homology with lipocortin

Using as a starting material either a detergent extract or a protein fraction eluted from membranes with ethylene glycol bis (beta-aminoethyl ether)-N,N'-tetraacetic acid, we have isolated from human placental membranes a major substrate for the epidermal growth factor (urogastrone) receptor kinase (EGF kinase). The substrate was isolated both in an intact form, having a molecular mass of approximately 38-kDa (p38), and in a 35-kDa form (p35) representing a proteolytic cleavage product of p38. Both p38 and p35 cross-reacted with antibodies directed against bovine retinal transducin, but did not cross-react with antibodies directed against the 35-kDa beta subunit of human placental G-protein. Antisera directed against the placental EGF kinase substrate failed to react with either bovine or human placental src kinase substrate, p36. Conversely, antisera directed against p36 reacted only poorly with placental p38 or p35. Although p38 had a blocked amino terminus that precluded sequence analysis, p35 yielded an N-terminal sequence that was identical with residues 13-36 of human lipocortin. Our data clearly distinguish p38 from the previously described intestinal calcium binding protein calpactin I or p36 that is also a tyrosine kinase substrate, and our work points to a close relationship (if not identity) between p35 and a 35-kDa EGF receptor kinase substrate previously characterized in A431 cells. We conclude that p38 and p35, which very likely represent human placental lipocortin, may share only limited epitope homology with transducin alpha subunit; however, the possibility that p38, along with intestinal p36 and with a family of related calcium binding proteins, may, like transducin, play a role in receptor-mediated transmembrane signaling is discussed.     

Dishevelled phosphorylation, subcellular localization and multimerization regulate its role in early embryogenesis

Dishevelled (Dsh) induces a secondary axis and can translocate to the membrane when activated by Frizzleds; however, dominant-negative approaches have not supported a role for Dsh in primary axis formation. We demonstrate that the Dsh protein is post-translationally modified at the dorsal side of the embryo: timing and position of this regulation suggests a role of Dsh in dorsal-ventral patterning in Xenopus. To create functional links between these properties of Dsh we analyzed the influence of endogenous Frizzleds and the Dsh domain dependency for these characteristics. Xenopus Frizzleds phosphorylate and translocate Xdsh to the membrane irrespective of their differential ectopic axes inducing abilities, showing that translocation is insufficient for axis induction. Dsh deletion analysis revealed that axis inducing abilities did not segregate with Xdsh membrane association. The DIX region and a short stretch at the N-terminus of the DEP domain are necessary for axis induction while the DEP region is required for Dsh membrane association and its phosphorylation. In addition, Dsh forms homomeric complexes in embryos suggesting that multimerization is important for its proper function.     

Making teeth to order: conserved genes reveal an ancient molecular pattern in paddlefish (Actinopterygii)

Ray-finned fishes (Actinopterygii) are the dominant vertebrate group today (+30 000 species, predominantly teleosts), with great morphological diversity, including their dentitions. How dental morphological variation evolved is best addressed by considering a range of taxa across actinopterygian phylogeny; here we examine the dentition of Polyodon spathula (American paddlefish), assigned to the basal group Acipenseriformes. Although teeth are present and functional in young individuals of Polyodon, they are completely absent in adults. Our current understanding of developmental genes operating in the dentition is primarily restricted to teleosts; we show that shh and bmp4, as highly conserved epithelial and mesenchymal genes for gnathostome tooth development, are similarly expressed at Polyodon tooth loci, thus extending this conserved developmental pattern within the Actinopterygii. These genes map spatio-temporal tooth initiation in Polyodon larvae and provide new data in both oral and pharyngeal tooth sites. Variation in cellular intensity of shh maps timing of tooth morphogenesis, revealing a second odontogenic wave as alternate sites within tooth rows, a dental pattern also present in more derived actinopterygians. Developmental timing for each tooth field in Polyodon follows a gradient, from rostral to caudal and ventral to dorsal, repeated during subsequent loss of teeth. The transitory Polyodon dentition is modified by cessation of tooth addition and loss. As such, Polyodon represents a basal actinopterygian model for the evolution of developmental novelty: initial conservation, followed by tooth loss, accommodating the adult trophic modification to filter-feeding.     

Factors influencing detection of nesting crested caracaras

Management of crested caracaras (Caracara cheriway), focuses on nests identified during surveys. If no nests are found, management can be suspended. Thus, false negatives can have substantial consequences. We surveyed 49 breeding territories to assess factors with the potential to cause false negatives in detecting nests of crested caracaras and in observing adult birds. The probability that a nest would be detected on any given visit increased by about 0.5% for each hour of observer experience up to about 70 hours (our maximum). Experience did not affect the probability of observing an adult. The probability of detecting a caracara nest or observing an adult caracara decreased by 2.0–3.5% each hour after sunrise that a visit began. If visibility during any portion of a visit was obscured by fog or rain, the probability of detecting a nest decreased by as much as 60%, and the probability of observing an adult caracara decreased by about 50%. We provide a tool managers can use to calculate the likelihood of successful surveys. We recommend that managers disregard negative results from surveys conducted under conditions that are unlikely to yield positive results, and repeat those surveys under better conditions. © 2011 The Wildlife Society.     

Phylogeny of Helicobacter felis sp. nov., Helicobacter mustelae, and related bacteria.

Strain CS1T (T = type strain) is a gram-negative, microaerophilic, urease-positive, spiral-shaped bacterium that was isolated from the gastric mucosa of a cat. Additional strains which possessed biochemical and ultrastructural characteristics similar to those of strain CS1T were isolated from the gastric mucosa of cats and dogs. The guanine-plus-cytosine content of the DNA of strain CS1T was 42.5 mol%. The 16S rRNA sequences of strain CS1T, strain DS3 (a spiral-shaped isolate from a dog), and Helicobacter mustelae were determined by direct RNA sequencing, using a modified Sanger method. These sequences were compared with the 16S rRNA sequences of Helicobacter pylori, "Flexispira rappini," Wolinella succinogenes, and 11 species of campylobacters. A dendrogram was constructed based upon sequence similarities. Strains CS1T and DS3 were very closely related (level of similarity, 99.3%). Two major phylogenetic groups were formed; one group consisted of strains CS1T and DS3, H. mustelae, H. pylori, "F. rappini," and W. succinogenes, and the other group contained the true campylobacters. The average level of similarity between members of these two groups was 84.9%. Within the first group, strains CS1T and DS3, H. pylori, and H. mustelae formed a cluster of organisms with an interspecies similarity level of 94.5%. The phylogenetic positions of W. succinogenes and "F. rappini" were just outside this cluster. On the basis of the results of this study, we believe that strains CS1T (= ATCC 49179T) and DS3 represent a new species of the genus Helicobacter, for which we propose the name Helicobacter felis.     

Programmable in situ amplification for multiplexed imaging of mRNA expression

In situ hybridization methods enable the mapping of mRNA expression within intact biological samples. With current approaches, it is challenging to simultaneously map multiple target mRNAs within whole-mount vertebrate embryos, representing a significant limitation in attempting to study interacting regulatory elements in systems most relevant to human development and disease. Here, we report a multiplexed fluorescent in situ hybridization method based on orthogonal amplification with hybridization chain reactions (HCR). With this approach, RNA probes complementary to mRNA targets trigger chain reactions in which fluorophore-labeled RNA hairpins self-assemble into tethered fluorescent amplification polymers. The programmability and sequence specificity of these amplification cascades enable multiple HCR amplifiers to operate orthogonally at the same time in the same sample. Robust performance is achieved when imaging five target mRNAs simultaneously in fixed whole-mount and sectioned zebrafish embryos. HCR amplifiers exhibit deep sample penetration, high signal-to-background ratios and sharp signal localization.     

Robust filtering for stochastic genetic regulatory networks with time-varying delay

This paper addresses the robust filtering problem for a class of linear genetic regulatory networks (GRNs) with stochastic disturbances, parameter uncertainties and time delays. The parameter uncertainties are assumed to reside in a polytopic region, the stochastic disturbance is state-dependent described by a scalar Brownian motion, and the time-varying delays enter into both the translation process and the feedback regulation process. We aim to estimate the true concentrations of mRNA and protein by designing a linear filter such that, for all admissible time delays, stochastic disturbances as well as polytopic uncertainties, the augmented state estimation dynamics is exponentially mean square stable with an expected decay rate. A delay-dependent linear matrix inequality (LMI) approach is first developed to derive sufficient conditions that guarantee the exponential stability of the augmented dynamics, and then the filter gains are parameterized in terms of the solution to a set of LMIs. Note that LMIs can be easily solved by using standard software packages. A simulation example is exploited in order to illustrate the effectiveness of the proposed design procedures.