Vortex Formation with a Snapping Shrimp Claw

Snapping shrimp use one oversized claw to generate a cavitating high speed water jet for hunting, defence and communication. This work is an experimental investigation about the jet generation. Snapping shrimp (Alpheus-bellulus) were investigated by using an enlarged transparent model reproducing the closure of the snapper claw. Flow inside the model was studied using both High-Speed Particle Image Velocimetry (HS-PIV) and flow visualization. During claw closure a channel-like cavity was formed between the plunger and the socket featuring a nozzle-type contour at the orifice. Closing the mechanism led to the formation of a leading vortex ring with a dimensionless formation number of approximate ΔT*≈4. This indicates that the claw might work at maximum efficiency, i.e. maximum vortex strength was achieved by a minimum of fluid volume ejected. The subsequent vortex cavitation with the formation of an axial reentrant jet is a reasonable explanation for the large penetration depth of the water jet. That snapping shrimp can reach with their claw-induced flow. Within such a cavitation process, an axial reentrant jet is generated in the hollow cylindrical core of the cavitated vortex that pushes the front further downstream and whose length can exceed the initial jet penetration depth by several times.     

Metal Ion Concentrations in Body Fluids after Implantation of Hip Replacements with Metal-on-Metal Bearing – Systematic Review of Clinical and Epidemiological Studies

Introduction

The use of metal-on-metal (MoM) total hip arthroplasty (THA) increased in the last decades. A release of metal products (i.e. particles, ions, metallo-organic compounds) in these implants may cause local and/or systemic adverse reactions. Metal ion concentrations in body fluids are surrogate measures of metal exposure.

Objective

To systematically summarize and critically appraise published studies concerning metal ion concentrations after MoM THA.

Methods

Systematic review of clinical trials (RCTs) and epidemiological studies with assessment of metal ion levels (cobalt, chromium, titanium, nickel, molybdenum) in body fluids after implantation of metalliferous hip replacements. Systematic search in PubMed and Embase in January 2012 supplemented by hand search. Standardized abstraction of pre- and postoperative metal ion concentrations stratified by type of bearing (primary explanatory factor), patient characteristics as well as study quality characteristics (secondary explanatory factors).

Results

Overall, 104 studies (11 RCTs, 93 epidemiological studies) totaling 9.957 patients with measurement of metal ions in body fluids were identified and analyzed. Consistently, median metal ion concentrations were persistently elevated after implantation of MoM-bearings in all investigated mediums (whole blood, serum, plasma, erythrocytes, urine) irrespective of patient characteristics and study characteristics. In several studies very high serum cobalt concentrations above 50 µg/L were measured (detection limit typically 0.3 µg/L). Highest metal ion concentrations were observed after treatment with stemmed large-head MoM-implants and hip resurfacing arthroplasty.

Discussion

Due to the risk of local and systemic accumulation of metallic products after treatment with MoM-bearing, risk and benefits should be carefully balanced preoperatively. The authors support a proposed „time out“ for stemmed large-head MoM-THA and recommend a restricted indication for hip resurfacing arthroplasty. Patients with implanted MoM-bearing should receive regular and standardized monitoring of metal ion concentrations. Further research is indicated especially with regard to potential systemic reactions due to accumulation of metal products.     

On the Challenge of Fitting Tree Size Distributions in Ecology

Patterns that resemble strongly skewed size distributions are frequently observed in ecology. A typical example represents tree size distributions of stem diameters. Empirical tests of ecological theories predicting their parameters have been conducted, but the results are difficult to interpret because the statistical methods that are applied to fit such decaying size distributions vary. In addition, binning of field data as well as measurement errors might potentially bias parameter estimates. Here, we compare three different methods for parameter estimation – the common maximum likelihood estimation (MLE) and two modified types of MLE correcting for binning of observations or random measurement errors. We test whether three typical frequency distributions, namely the power-law, negative exponential and Weibull distribution can be precisely identified, and how parameter estimates are biased when observations are additionally either binned or contain measurement error. We show that uncorrected MLE already loses the ability to discern functional form and parameters at relatively small levels of uncertainties. The modified MLE methods that consider such uncertainties (either binning or measurement error) are comparatively much more robust. We conclude that it is important to reduce binning of observations, if possible, and to quantify observation accuracy in empirical studies for fitting strongly skewed size distributions. In general, modified MLE methods that correct binning or measurement errors can be applied to ensure reliable results.     

Assessment and Interpretation of Bacterial Viability by Using the LIVE/DEAD BacLight Kit in Combination with Flow Cytometry

The commercially available LIVE/DEAD BacLight kit is enjoying increased popularity among researchers in various fields of microbiology. Its use in combination with flow cytometry brought up new questions about how to interpret LIVE/DEAD staining results. Intermediate states, normally difficult to detect with epifluorescence microscopy, are a common phenomenon when the assay is used in flow cytometry and still lack rationale. It is shown here that the application of propidium iodide in combination with a green fluorescent total nucleic acid stain on UVA-irradiated cells of Escherichia coli, Salmonella enterica serovar Typhimurium, Shigella flexneri, and a community of freshwater bacteria resulted in a clear and distinctive flow cytometric staining pattern. In the gram-negative bacterium E. coli as well as in the two enteric pathogens, the pattern can be related to the presence of intermediate cellular states characterized by the degree of damage afflicted specifically on the bacterial outer membrane. This hypothesis is supported by the fact that EDTA-treated nonirradiated cells exhibit the same staining properties. On the contrary, this pattern was not observed in gram-positive Enterococcus faecalis, which lacks an outer membrane. Our observations add a new aspect to the LIVE/DEAD stain, which so far was believed to be dependent only on cytoplasmic membrane permeability.     

Low molecular weight adiponectin negatively correlates with the waist circumference and monocytic IL-6 release

Adiponectin circulates as trimer (LMW), hexamer (MMW) and high molecular weight multimer (HMW) but the distribution and effects of these isoforms have not been studied in detail. Monocytes were isolated from normal weight and overweight controls and patients with type 2 diabetes mellitus (T2D) and monocytic release of IL-6 positively correlated with the body mass index (BMI). HMW-adiponectin further enhanced and LMW-adiponectin reduced IL-6 release in monocytes. Systemic total adiponectin, and the HMW isoform were not different in these groups but MMW-adiponectin was lower in T2D, and LMW-adiponectin was reduced in the obese and T2D. Circulating LMW-adiponectin negatively correlated to monocytic IL-6 release. Systemic IL-6 was higher in the obese control group and T2D, respectively, but did not correlate with monocytic IL-6 secretion. Therefore, the current study indicates that HMW-adiponectin exerts pro- and LMW-adiponectin antiinflammatory effects and reduced LMW-adiponectin in obesity may partly contribute to elevated monocytic IL-6 release.     

Assessment and interpretation of bacterial viability by using the LIVE/DEAD BacLight Kit in combination with flow cytometry

The commercially available LIVE/DEAD BacLight kit is enjoying increased popularity among researchers in various fields of microbiology. Its use in combination with flow cytometry brought up new questions about how to interpret LIVE/DEAD staining results. Intermediate states, normally difficult to detect with epifluorescence microscopy, are a common phenomenon when the assay is used in flow cytometry and still lack rationale. It is shown here that the application of propidium iodide in combination with a green fluorescent total nucleic acid stain on UVA-irradiated cells of Escherichia coli, Salmonella enterica serovar Typhimurium, Shigella flexneri, and a community of freshwater bacteria resulted in a clear and distinctive flow cytometric staining pattern. In the gram-negative bacterium E. coli as well as in the two enteric pathogens, the pattern can be related to the presence of intermediate cellular states characterized by the degree of damage afflicted specifically on the bacterial outer membrane. This hypothesis is supported by the fact that EDTA-treated nonirradiated cells exhibit the same staining properties. On the contrary, this pattern was not observed in gram-positive Enterococcus faecalis, which lacks an outer membrane. Our observations add a new aspect to the LIVE/DEAD stain, which so far was believed to be dependent only on cytoplasmic membrane permeability.     

Identification of Importin α 7 Specific Transport Cargoes Using a Proteomic Screening Approach

The importin α:β complex is responsible for the nuclear import of proteins bearing classical nuclear localization signals. In mammals, several importin α subtypes are known to exist that are suggested to have individual functions. Importin α 7 was shown to play a crucial role in early embryonic development in mice. Embryos from importin α 7–depleted females stop at the two-cell stage and show disturbed zygotic genome activation. As there is evidence that individual importin α subtypes possess cargo specificities, we hypothesized that importin α 7 binds a unique set of intracellular proteins. With the use of a collection of in vitro and in vivo binding assays, importin α 7 interaction partners were identified that differed from proteins found to bind to importin α 2 and 3. One of the proteins preferentially binding importin α 7 was the maternal effect protein Brg1. However, Brg1 was localized in oocyte nuclei in importin α 7–deficient embryos, albeit in reduced amounts, suggesting additional modes of nuclear translocation of this factor. An additional SILAC-based screening approach identified Ash2l, Chd3, Mcm3, and Smarcc1, whose nuclear import seems to be disturbed in importin α 7–deficient fibroblasts.The nuclear compartment is spatially separated from the cytoplasm by the nuclear envelope. The nuclear pores, which are embedded in the nuclear membrane, are the gateway for intracellular molecules that must traverse the nuclear envelope to enter or exit the nucleus. Small molecules can pass through the nuclear pores via passive diffusion; molecules weighing more than 40 kDa must be transported actively through the nuclear pore (1). According to the transport direction, carrier proteins that mediate these nuclear trafficking events are called importins or exportins, known collectively as karyopherins. Nuclear trafficking mediated by the importin α:importin β heterodimer is perhaps the best characterized nuclear import pathway. Here, importin α (or karyopherin α) serves as an adaptor molecule that binds cargoes containing classical nuclear localization signals (NLSs)¹ in their primary amino acid sequence. Upon cargo binding, importin α binds to importin β (karyopherin β 1), forming a trimeric transport complex that moves through the nuclear pore into the nucleus. In the nucleoplasm, RanGTP binds to importin β, leading to a conformational change in importin β and to the dissociation of the transport complex. The cargo is released to the nucleoplasm and can fulfill its function, whereas importins α and β are recycled back to the cytoplasm, where they can perform the next round of import (for reviews, see Refs. 2–4).There is only one importin α and one importin β protein present in yeast. However, multiple importin α isoforms, each transcribed from a different gene, are found in higher eukaryotes. Three importin α subtypes have been identified in Caenorhabditis elegans and Drosophila melanogaster, and up to seven importin α isoforms have been identified in mammals (5–7). These importin α isoforms can be grouped into three subfamilies based on sequence similarity (8). Little is known as to why multiple importin α isoforms exist in higher eukaryotes, but there is evidence that each importin α subtype has a tissue-specific expression pattern and distinct cargoes containing classical NLSs (9–12).We have recently shown that importin α 7 is required for embryonic development in mice (13). Oocytes from importin α 7 null females ovulate but produce embryos that fail to develop beyond the two-cell stage. To elucidate the molecular mechanisms behind this phenotype, we were especially interested in the identification of importin α 7 binding partners. Therefore, the aim of this study was to combine in vivo and in vitro screens to identify an importin α 7 subtype-specific cargo set. Through GST pull-down and co-immunoprecipitation experiments, we were able to identify a unique set of importin α 7 interaction partners that are involved in RNA processing, chromosome organization, and chromatin modification. Among them we found Brahma-related gene 1 (Brg1), also known as smarca4 or Baf190a, a known maternal effect protein required for early development in the mouse (14). An additional approach utilizing stable isotope labeling by amino acids in cell culture (SILAC) was used to further narrow down the list of potential importin α 7 specific cargoes. Hereby, we identified Ash2l, Chd3, Mcm3, Mcm5, and Smarcc1, whose nuclear levels were clearly decreased in importin α 7–deficient fibroblasts.     

Research Article: Role of autophagy,SQSTM1, SH3GLB1, and TRIM63 in the turnover of nicotinic acetylcholine receptors

Removal of ubiquitinated targets by autophagosomes can be mediated by receptor molecules, like SQSTM1, in a mechanism referred to as selective autophagy. While cytoplasmic protein aggregates, mitochondria, and bacteria are the best-known targets of selective autophagy, their role in the turnover of membrane receptors is scarce. We here showed that fasting-induced wasting of skeletal muscle involves remodeling of the neuromuscular junction (NMJ) by increasing the turnover of muscle-type CHRN (cholinergic receptor, nicotinic/nicotinic acetylcholine receptor) in a TRIM63-dependent manner. Notably, this process implied enhanced production of endo/lysosomal carriers of CHRN, which also contained the membrane remodeler SH3GLB1, the E3 ubiquitin ligase, TRIM63, and the selective autophagy receptor SQSTM1. Furthermore, these vesicles were surrounded by the autophagic marker MAP1LC3A in an ATG7-dependent fashion, and some of them were also positive for the lysosomal marker, LAMP1. While the amount of vesicles containing endocytosed CHRN strongly augmented in the absence of ATG7 as well as upon denervation as a model for long-term atrophy, denervation-induced increase in autophagic CHRN vesicles was completely blunted in the absence of TRIM63. On a similar note, in trim63^−/− mice denervation-induced upregulation of SQSTM1 and LC3-II was abolished and endogenous SQSTM1 did not colocalize with CHRN vesicles as it did in the wild type. SQSTM1 and LC3-II coprecipitated with surface-labeled/endocytosed CHRN and SQSTM1 overexpression significantly induced CHRN vesicle formation. Taken together, our data suggested that selective autophagy regulates the basal and atrophy-induced turnover of the pentameric transmembrane protein, CHRN, and that TRIM63, together with SH3GLB1 and SQSTM1 regulate this process.