Isolation and characterisation of dog uropathogenic Escherichia coli strains and their fimbriae

A number of Escherichia coli strains have been isolated from dogs with urinary tract infections. These strains have been characterised with respect to their O, K, H, and fimbrial antigens, colicin production, antibiotic resistance, plasmid content and their ability to haemagglutinate erythrocytes from various species. Crossed immunoelectrophoresis of fimbrial extracts, as well as the reaction of partly purified fimbriae of a number of these strains with monoclonal antibodies revealed homology or a strong crossereaction with an F12 fimbrial subunit protein of human uropathogenic E. coli strains. Unlike human F12 fimbriae producing strains, the dog isolates did agglutinate dog erythrocytes in the presence of D-mannose but not human erythrocytes, indicating that the adhesin carried by these strains is different from the adhesin on fimbriae of human uropathogenic E. coli. Similar indications were obtained from experiments with latex beads coated with the receptor for P-fimbriae. These beads were agglutinated by Escherichia coli strains from human urinary tract infections, but not by the dog isolates described here. Preliminary adhesion experiments of human and dog Escherichia coli to human bladder epithelial and canine kidney epithelial cells also showed differences in adhesion depending on the origin of the strain tested.     

The influence of extra-cellular matrix and stroma remodeling on the productivity of long-term human bone marrow cultures

The stromal cell layer is believed to play an important role in long-term human bone marrow cultures (LTHBMCs). At present, neither the role that the stromal cell extra-cellular matrix (ECM) plays in influencing stroma behavior is well understood nor are the effects of stroma aging. Rapid medium exchanged LTHBMCs were established on surfaces precoated with human natural fibronectin and type 1 rat tail collagen. Although initial adhesion of hematopoietic cells was improved by the presence of both ECMs, the overall progenitor and nonadherent cell productivity was not improved nor did the stroma grow to confluency faster. Thus, the ECMs used did not significantly influence the cell productivity of LTHBMCs. To examine the influence of stromal cell layer aging, conditioned medium was obtained from the first two weeks of LTHBMCs that was subsequently concentrated and used as a medium supplement in a second set of slowly exchanged LTHBMCs. The presence of the concentrated conditioned medium (conCM) enhanced the production of nonadherent cells three-fold compared with control over an eight week culture period. Control cultures that were exposed to conCM after 4 weeks in culture significantly improved their cell productivity during the latter 4 weeks of culture compared with control. The productivity of cultures exposed to conCM for 4 weeks dropped significantly when unsupplemented medium was used for the latter 4 weeks of culture. Interestingly, phytohemagglutin-stimulated leukocyte-conditioned medium stimulated LTHMBCs in a similar fashion, as did conditioned medium from early LTHBMCs. Taken together, these results strongly suggest that the stromal cell layer does produce important factors for active hematopoiesis during its growth to confluence.     

Environmental variation partitioned into separate heritable components

Trait variation is normally separated into genetic and environmental components, yet genetic factors also control the expression of environmental variation, encompassing plasticity across environmental gradients and within‐environment responses. We defined four components of environmental variation: plasticity across environments, variability in plasticity, variation within environments, and differences in within‐environment variation across environments. We assessed these components for cold tolerance across five rearing temperatures using the Drosophila melanogaster Genetic Reference Panel (DGRP). The four components were found to be heritable, and genetically correlated to different extents. By whole genome single marker regression, we detected multiple candidate genes controlling the four components and showed limited overlap in genes affecting them. Using the binary UAS‐GAL4 system, we functionally validated the effects of a subset of candidate genes affecting each of the four components of environmental variation and also confirmed the genetic and phenotypic correlations obtained from the DGRP in distinct genetic backgrounds. We delineate selection targets associated with environmental variation and the constraints acting upon them, providing a framework for evolutionary and applied studies on environmental sensitivity. Based on our results we suggest that the traditional quantitative genetic view of environmental variation and genotype‐by‐environment interactions needs revisiting.     

Membrane adsorption characteristics determine the kinetics of flow-through transductions

Retrovirus-mediated gene transfer is currently limited by random Brownian motion of the retrovirus. This limitation can be overcome by flowing the retrovirus solution through a porous membrane that supports the target cells, leading to a significant increase in the transduction efficiency. This procedure is termed "flow-through transduction." In this study, we characterized the effects of the fluid flowrate and the influence that membrane characteristics have on the flow-through transduction procedure. The transduction efficiencies increased with flowrate until a plateau was reached at average flow velocities exceeding 0.3 cm/h for flow times of 3 to 4 h, using a collagen-coated depth (COL) membrane. A correlation between the optimal time for maximal gene transfer using flow-through transductions and the optimal time for maximal virus activity on the membrane was found, suggesting that the membrane adsorption capacity for virus determined the amount of gene transfer that could occur.Membrane adsorption characteristics were further investigated using two different membrane types: a tracketched polyester screen (PE) membrane and the COL membrane. Flow-through transductions using the PE and COL membranes showed that a high level of gene transfer could be attained using the COL membrane while the PE membrane gave much lower transduction efficiencies. The addition of the polycation polybrene (PB) changed these results markedly, making transductions achieved on the PE membrane similar in number to those obtained on the COL membrane. Since PB is believed to influence the virus adsorption to PE membrane, these results further support the conclusion that the increase in gene transfer achieved by the flow-through transduction procedure is due to virus adsorption to the membrane. The flow-through transduction procedure thus leads to co-localization of the viral vector and the target cell that in turn leads to a high transduction efficiency. (c) 1996 John Wiley & Sons, Inc.     

Cell growth and differentiation on feeder layers is predicted to be influenced by bioreactor geometry

Tissue function is comprised of a complex interplay between biological and physicochemical rate processes. The design of bioreactors for tissue engineering must account for these processes simultaneously in order to obtain a bioreactor that provides a uniform environment for tissue growth and development. In the present study we consider the effects of fluid flow and mass transfer on the growth of a tissue in a parallel-plate bioreactor configuration. The parenchymal cells grow on a preformed stromal (feeder) layer that secretes a growth factor that stimulates parenchymal stem cell replication and differentiation. The biological dynamics are described by a unilineage model that describes the replication and differentiation of the tissue stem cell. The physicochemical rates are described by the Navier-Stokes and convective-diffusion equations. The model equations are solved by a finite element method. Two dimensionless groups govern the behavior of the solution. One is the Graetz number (Gz) that describes the relative rates of convection and diffusion, and the other a new dimensionless ratio (designated by P) that describes the interplay of the growth factor production, diffusion, and stimulation. Four geometries (slab, gondola, diamond, and radial shapes) for the parallel-plate bioreactor are analyzed. The uniformity of cell growth is measured by a two-dimensional coefficient of variance. The concentration distribution of the stroma-derived growth factor was computed first based on fluid flow and bioreactor geometry. Then the concomitant cell density distribution was obtained by integrating the calculated growth factor concentration with the parenchymal cell growth and unilineage differentiation process. The spatiotemporal cell growth patterns in four different bioreactor configurations were investigated under a variety of combinations of Gz (10(-1), 10(0), and 10(1)) and P(10(-2), 10(-1), 10(0), 10(1), and 10(2)). The results indicate high cell density and uniformity can be achieved for parameter values of P = 0.01, ..., 0.1 and Gz = 0.1, ..., 1.0. Among the four geometries investigated the radial-flow-type bioreactor provides the most uniform environment in which parenchymal cells can grow and differentiate ex vivo due to the absence of walls that are parallel to the flow paths creating slow flowing regions. (c) 1996 John Wiley & Sons, Inc.     

Different measures of human hematopoietic cell culture performance are optimized under vastly different conditions

Hematopoiesis, the formation of mature blood cells from stem (LTC-IC) and progenitor (CFU-GM) cells in the bone marrow, is a complex tissue-forming process that leads to many important physiological functionalities. Consequently, a functioning ex vivo hematopoietic system has a variety of basic scientific and clinical uses. The design and operation of such a system presents the tissue engineer with challenges and choices. In this study, three culture variables were used to control ex vivo human hematopoiesis. Systematic variation of inoculum density (ID), medium exchange interval (MEI), and the use of preformed stroma (PFS) showed that (1) all three variables significantly influenced culture performance, (2) the three variables interacted strongly, and (3) the variables could be manipulated to achieve the optimization of different performance criteria. Donor-to-donor variability in culture performance was great at low ID but was minimized at higher ID. PFS had a large positive effect on cell and CFU-GM output at low ID, but had minimal effect at higher ID. In fact, PFS caused a decrease in LTC-IC output at high ID. The effects of PFS indicated that stromal cell elements became more limiting than proliferative cell elements as ID was reduced.In cultures without PFS, maximum cell output was obtained with high ID using a short MEI, whereas the greatest cell expansion ratio was obtained at low ID with an intermediate MEI. Maximum CFU-GM output was obtained from cultures with high ID using a short to intermediate MEI, whereas the greatest CFU-GM expansion ratio was obtained at intermediate ID with an intermediate MEI. The addition of PFS altered the locations of these maxima. In general, PFS moved the maxima to lower ID, and culture output became more sensitive to MEI. Therefore, the optimization of one performance criterion always resulted in a decline of the others. This study demonstrates that ex vivo tissue function is sensitive to many culture variables in an interactive fashion and that systematic multivariable studies are required to characterize tissue function. Once the effects of individual variables and their interactions are known, this knowledge can be used to optimize tissue performance with respect to desired criteria. (c) 1996 John Wiley & Sons, Inc.     

Mixed photo-cross-linked polyvinyl alcohol and calcium-alginate gels for cell entrapment

Living cells may be immobilized by gel entrapment under very mild conditions. The ionotropic gelation of alginate with bivalent cations such as Ca²⁺, as well as photo-induced gelation of polyvinyl alcohol (PVA) bearing photosensitive stilbazolium (SbQ) groups, are procedures that are compatible with most bioactive materials. In the search for more stable and stronger alginate gel beads, experiments have been carried out to investigate mixed gels from alginate and PVA-SbQ. The swelling capacities, diffusion properties, and potential toxic effect of the binary gel beads have been evaluated. The gel beads of selected PVA-SbQ/alginate mixtures were applied successfully as carriers in a denitrification process with continuous feeding of unsterilized water medium. Under such conditions, the purely synthetic PVA-SbQ network is expected to have a longer lifespan than a natural biopolymer such as alginate.     

Protein and lipid content of the rotifer Brachionus plicatilis during variable growth and feeding condition

Rotifers (Brachionus plicatilis) grown atdifferent growth rate ( = 0.05–0.39 d^–1)were analyzed for protein, lipid, fatty acids, aminoacids and free amino acids, and values are expressedin terms of individuals and dry weight. Increase ingrowth rate is equivalent with increased food rationof the individual rotifer, which responded by higheregg ratio. The protein content per individualrotifer increased by 60–80% when the growth rate increased, whereas the protein content per dryweight showed a slight, although insignificant,increase (p > 0.05). The lipid content perindividual was constant, whereas lipid per dryweight decreased when the growth rate increased. Theratio DHA/EPA decreased when the growth ratesincreased. The amino acids profile in percent oftotal amino acids showed low variation betweencultures maintained at different growth rates,whereas the values expressed in terms of amino acidper individual showed higher variation. The range ofvariation for free amino acids was more pronouncedthan for total amino acids.Short-term food enrichment of poorly fed rotifers( = 0.05 d^–1) with balanced protein richdiet resulted in increased protein and lipid contentper rotifer. The protein content per dry weightshowed only minor changes whereas lipid per dryweight increased. Contrary, short term enrichmentwith a lipid rich diet resulted in increased lipidcontent per individual rotifer and per dry weight,whereas the protein content per individual remainedconstant and the protein content per dry weightshowed a slight decrease.Our experiments show that the amount of protein, wasquite variable in rotifers, and that feeding andgrowth condition were decisive factors affecting it.The range of variation was large enough to be animportant factor during first feeding of marinelarvae, and should therefore be considered infeeding larvae.